Substrate-mediated interactions and intermolecular forces between molecules adsorbed on surfaces

Adsorbate interactions and reactions on metal surfaces have been investigated using scanning tunneling microscopy. The manners in which adsorbates perturb the surface electronic structure in their vicinity are discussed. The effects these perturbations have on other molecules are shown to be important in overlayer growth. Interactions of molecules with surface steps are addressed, and each molecule's electron affinity is shown to dictate its adsorption sites at step edges. Standing waves emanating from steps are demonstrated to effect transient molecular adsorption up to 40 A away from the step edge. Halobenzene derivatives are used to demonstrate how the surface is important in aligning reactive intermediates.     

Development of ceramic floor tile compositions based on quartzite and granite sludges

In the present work, industrial sludges derived from cutting and polishing natural stones (granite and quartzite) were characterised in terms of particles size distribution, chemical and mineralogical composition, and thermal behaviour and their potential to be incorporated as main components in red-clay-based stoneware tiles was evaluated. High levels (60–70 wt.%) of incorporation were attempted aiming at designing new formulations intended to be less expensive and possess better final properties (lower water absorption and higher flexural strength) in comparison to an industrial reference body used in the production of rustic tiles by extrusion, characterised 8–9% water absorption and a flexural strength of 17–18 MPa. Extruded rods of different formulations were produced and fired at 1100 °C, 1125 °C, 1150 °C and 1200 °C. The experimental results showed that all the new formulations performed better with the most significant improvements being obtained with incorporation of granite sludge. Flexural strength values more than triplicate and water absorption decreased by more than one order of magnitude in comparison to the reference paste. The new products fulfil the requirements of the ISO 13006 standard, group BIa (porcelain tiles).     

Ocean thermal energy and desalination

In 1881, the French physicist d'Arsonval was the first to suggest the harnessing of the temperature difference between the warm surface layers and cold deep layers of tropical oceans. Since then, several attempts have been made to convert this undepletable supply of thermal potential energy into mechanical energy and, later, into electricity. In recent years, various countries including France have launched thermal energy conversion (OTEC) programmes. Tropical regions with useful temperature differences often lack both conventional energy resources and potable water. In such regions, OTEC plants could be used with advantage for the simultaneous production of power and desalinated seawater.An original seawater distillation scheme using surface water and the cold reject stream from an OTEC cycle is discussed. Power not required for distillation may be exported outside the plant. The combined distillation and OTEC scheme is compared with conventional desalination plant producing both potable water and electricity. The OTEC scheme appears highly flexible and shows considerable economic promise.     

Structural Effects on the Adhesive Properties of Butadiene/Styrene Radial Teleblock Copolymers

The effects of butadiene/styrene ratio, monomer distribution, and molecular weight distribution and branching on the pressure sensitive adhesive properties of butadiene/ styrene radial teleblock copolymers are reported. Styrene content of polymers with varying structures shows a close relation with tack response, and styrene content and structure affect solution viscosity and shear adhesion. When part of the styrene is incorporated into the polybutadiene segment to yield a block progressively enriched in styrene (tapered block), solution viscosity and shear adhesion are reduced. When the butadiene segment is replaced by a block of randomly copolymerized butadiene and styrene, the polymers provide lower solution viscosities and shear adhesion but unchanged tack.

The molecular weight distribution of the radial teleblock polymers can vary from broad, highly branched compositions to narrow molecular weight distributions of almost Iinear polymers. The latter have relatively high solution viscosity and low shear adhesion, whereas the former polymers produce moderate solution viscosity but high shear adhesion. Tack is generally unaffected.     

Trays for gas-liquid contacting

A type of tray for gas-liquid contacting is described, in which the free area for gas flow through the tray is variable with and controlled by the gas flowrate. The property through which control of the free area is effected is the surface tension of the liquid phase. The advantages are the same as those of ballast and valve trays; namely, reduced pressure drop at high gas rates resulting in increased column capacity, and reduced free space at lower gas rates resulting in high mass transfer efficiency at low and medium vapor loadings as well. Tooling and production costs for the trays of the present investigation, however, are considerably lower than for ballast or valve trays or any other types which require machining operations in their fabrication, and are as low or lower than for sieve trays. Initial experimental comparisons with conventional trays demonstrated that the trays of the present investigation, although designed primarily for operation at high vapor loadings, were indeed capable of yielding high mass transfer efficiencies in the low-to-medium range of vapor loading     

Lipids in soil

As much as 20% of soil humus occurs in the form of lipids. High values are characteristic of Podzol soils and highmoor peats. Lipids of the following types are known to be present: paraffin hydrocarbons, phospholipids, fats, waxes, fatty acids, and terpenoids. A long list of compounds have been reported; the identification of many of them require confirmation using modern analytical techniques. Some of the lipids known to occur in soil have phytotoxic properties; these may have a depressing effect on seed germination and on root and shoot growth. Waxes and similar materials may be responsible for the difficultly wettable condition of certain sands.     

Adsorption isotherms of sesame oil in a concentrated miscella system

The adsorption of peroxides, unsaturated carbonyls, free fatty acids and carotenoids from unrefined sesame oil on vegetable carbon (5%, w/w) in a miscella system was studied. Three different solvent conditions (hexane/ethanol, 100:0, 95:5 and 75:25, vol/vol), combined in a factorial design with five levels of solvent (0, 10, 20, 30 and 40%, w/w), were used to develop the miscella. Equilibrium adsorption was not achieved during the 100 min of adsorption, mainly because the oil components were involved in oxidation reactions during the adsorption process. However, for a given solvent concentration, adsorption of the oil components showed a significant linear regression on their respective initial concentration in the miscella (C_i). Peroxides and carbonyls showed, at all solvent levels investigated, an affinity for the carbon more independent of their C_i than free fatty acids and carotenoids. In general, at the same C_i, a higher adsorption was achieved as solvent concentration increased. The results indicated that free fatty acid adsorption may depend on competitive adsorption based on molecule hydrophobicity. However, in spite of the higher hydrophobicity of carotenoids, compared with free fatty acids, they might not be competing for the same adsorbing sites. Ethanol showed a prooxidant effect that increased peroxide production during adsorption but did not affect the reaction involved in carbonyl production.     

Arylidene polymers. XVIII. Synthesis and thermal behavior of organometallic arylidene polyesters containing ferrocene derivatives in the main chain

A new interesting category of organometallic polyesters based on diarylidenecycloalkanones containing ferrocene derivatives in the polymer main chain has been prepared by interfacial polycondensation of 1,1′-dichlorocarbonyl ferrocene or 1,1′-dichlorocarbonyl-4,4′-diiodoferrocene with 2,5-bis(p-hydroxybenzylidene)cyclopentanone, 2,5-divanillylidenecyclopentanone, 2,6-bis(p-hydroxybenzylidene)cyclohexanone, 2,6-divanillylidenecyclohexanone, and 2,7-bis(p-hydroxybenzylidene) cycloheptanone. The resulting polyesters were characterized by elemental analyses, infrared spectroscopy, solubility, and viscometry measurements. The thermal behavior of the synthesized polymers was evaluated by thermal gravimetric analysis and correlated with their structures. The crystallinity of all polymers were examined by x-ray diffraction analysis. Moreover, the electrical conductivity of a selected example of polymer was investigated above the temperature range (300–500 K) and showed that it followed an Arrhenius-type equation with activation energy 2.09 eV. © 1993 John Wiley & Sons, Inc.     

Tensile properties of CaCO3-filled polyethylenes

Tensile stress–strain behavior and dilatation behavior of CaCO₃-filled linear polyethylenes with differing molecular weight was found to be dependent upon filler content, polymer filler interface, and polymer molecular weight. Electron microscopy of samples undergoing deformation revealed the presence of craze type deformation.