搪瓷釉料新颖添加剂铝溶胶

搪瓷釉料新颖添加剂铝溶胶任岳荣（浙江省明矾石综合利用研究所３２５０２８）ＮｅｗＡｄｄｉｔｉｖｅＡｌｕｍｉｎａＳｏｌｆｏｒＧｌａｚｅｏｆＥｎａｍｅｌ￥ＲｅｎＹｕｅｒｏｎｇ（ＺｈｅｊｉａｎｇＩｎｓｔｉｔｕｔｅｏｆＣｏｍｐｒｅｈｅｎｓｉｖｅＵｔｉｌｉｚａｔ...     

高炉冷却技术的开发与应用

通过对中小型高型炉寿命的分析，结合河北省冶金设计院高炉设计的实践经验，总结了高炉冷却设备寿命短的原因，并提出冷却设备在材质和结构上的改进措施。     

P偏振光双表面反射比的角谱及其应用

p-偏振光在镀膜平板基片两面的反射光强度比值的角谱是膜层参数(折射率、消光系数和厚度)的函数.实验表明通过角谱的测量和数值模拟是精确测量薄膜参数的新途径.基于此原理,还试制出掺Sb的SnO2溶胶凝胶薄膜的光化学气敏传感器.     

Effects of Sc2O3 and MgO passivation layerson the output power of AlGaN/GaN HEMTs

The low temperature (100°C) deposition of Sc₂O₃ or MgO layers is found to significantly increase the output power of AlGaN/GaN HEMTs. At 4 GHz, there was a better than 3 dB increase in output power of 0.5×100 μm² HEMTs for both types of oxide passivation layers. Both Sc₂ O₃ and MgO produced larger output power increases at 4 GHz than conventional plasma-enhanced chemical vapor deposited (PECVD) SiN_x passivation which typically showed ⩽2 dB increase on the same types of devices. The HEMT gain also in general remained linear over a wider input power range with the Sc₂O₃ or MgO passivation. These films appear promising for reducing the effects of surface states on the DC and RF performance of AlGaN/GaN HEMTs     

Comparisons of Urban Travel Forecasts Prepared with the Sequential Procedure and a Combined Model

Detailed analyses and comparisons of urban travel forecasts prepared by applying the state-of-practice sequential procedure and the solution of a combined network equilibrium model are presented. The sequential procedure for solving the trip distribution, mode choice and assignment problems with feedback is the current practice in most transportation planning agencies, although its important limitations are well known. The solution of a combined model, in contrast, results from a single mathematical formulation, which ensures a well-converged and consistent result. Using a real network, several methods for solving the sequential procedure with feedback are compared to the solution of the combined model ESTRAUS. The results of these methods are shown to have various levels of instability. The paper concludes with a call for a new paradigm of travel forecasting practice based on an internally consistent model formulation that can be solved to a level of precision suitable for comparing alternative scenarios.     

Neural networks modeling signal responses and taxol production of cultured Taxus chinensis cells induced by bio-elicitor

Quantitatively describing the signal transduction process is important for understanding the mechanism of signal regulation in cells, and thus, poses both a challenge and an opportunity for chemical and biochemical engineers. An artificial neural network (ANN), in which we took the signal molecules as neural nodes, was constructed to simulate the generation of active oxygen species (AOS) in Taxus chinensis cells induced by a bio-elicitor. The relative contents of AOS in cells predicted by the ANN model agreed well with the experimental data and three notable stages of AOS increase were observed from the 3D figure of AOS generation. The robustness of AOS trajectories indicated that signal regulation in vivo was an integral feedback control model that ensured the adaptation of Taxus chinensis to environmental stress. The artificial neural network was able to predict taxol production as well as determine the optimal concentration of oligosaccharides needed for it.     

Effects of Heat Treatment on the Transformation Temperature and the Microstructure of Ni-Ti-Nb Shape Memory Alloy

The effects of heat treatment on the phase transformation temperature and the microstructure of Ni-Ti-Nb alloy have been investigated by means of R-T method, TEM and EPMA. With the increase of annealing temperature, cooling rate and ageing temperature, the Ms temperature increases. TEM observations show no new precipitated phase was found in the B2 parent phase after heat treatment, but EPMA shows the content of Ni (or Ni/Ti ratio) in the B2 matrix changed. The main reason for the change of transformation temperature lies in the change of the matrix composition (or Ni/Ti ratio) with the variation of heat treatment procedure.     

冶金能源信息库管理与能耗分析系统的研究

研究了通过计算机建立冶金能源信息库管理与能耗分析系统的相关问题。     

植被散射实验数据的特性分析

本文根据电波所获取的各种樾 射实测数据，分析了它们对不同极化波的响应特性。     

Identification of Hammerstein systems with asymmetric dead-zone nonlinearities using canonical parameterized model

A non-iterative identification method with parameterization of the unknown dead-zone is proposed for Hammerstein systems in presence of asymmetric dead-zone nonlinearities.The canonical parameterized model which is a single expression without segmentation is utilized to describe the dead-zone,based on which a universal-type parametric model can be established to approximate the entire system.This model can be established without separating the nonlinear part from the linear part.The dead-zone parameters and the coefficients in the linear transfer function can be estimated simultaneously according to the proposed algorithm.Numerical experiments are presented to illustrate the effectiveness of the proposed scheme.