Tomographic reconstruction using an adaptive tetrahedral mesh defined by a point cloud

Medical images in nuclear medicine are commonly represented in three dimensions as a stack of two-dimensional images that are reconstructed from tomographic projections. Although natural and straightforward, this may not be an optimal visual representation for performing various diagnostic tasks. A method for three-dimensional (3-D) tomographic reconstruction is developed using a point cloud image representation. A point cloud is a set of points (nodes) in space, where each node of the point cloud is characterized by its position and intensity. The density of the nodes determines the local resolution allowing for the modeling of different parts of the image with different resolution. The reconstructed volume, which in general could be of any resolution, size, shape, and topology, is represented by a set of nonoverlapping tetrahedra defined by the nodes. The intensity at any point within the volume is defined by linearly interpolating inside a tetrahedron from the values at the four nodes that define the tetrahedron. This approach creates a continuous piecewise linear intensity over the reconstruction domain. The reconstruction provides a distinct multiresolution representation, which is designed to accurately and efficiently represent the 3-D image. The method is applicable to the acquisition of any tomographic geometry, such as parallel-, fan-, and cone-beam; and the reconstruction procedure can also model the physics of the image detection process. An efficient method for evaluating the system projection matrix is presented. The system matrix is used in an iterative algorithm to reconstruct both the intensity and location of the distribution of points in the point cloud. Examples of the reconstruction of projection data generated by computer simulations and projection data experimentally acquired using a Jaszczak cardiac torso phantom are presented. This work creates a framework for voxel-less multiresolution representation of images in nuclear medicine.     

Cellulose‐Based Ionogels for Paper Electronics

A new class of biofriendly ionogels produced by gelation of microcellulose thin films with tailored 1‐ethyl‐3‐methylimidazolium methylphosphonate ionic liquids are demonstrated. The cellulose ionogels show promising properties for application in flexible electronics, such as transparency, flexibility, transferability, and high specific capacitances of 5 to 15 μF cm^?2. They can be laminated onto any substrate such as multilayer‐coated paper and act as high capacitance dielectrics for inorganic (spray‐coated ZnO and colloidal ZnO nanorods) and organic (poly[3‐hexylthiophene], P3HT) electrolyte‐gated field‐effect transistors (FETs), that operate at very low voltages (<2 V). Field‐effect mobilities in ionogel‐gated spray‐coated ZnO FETs reach 75 cm² V^?1 s^?1 and a typical increase of mobility with decreasing specific capacitance of the ionogel is observed. Solution‐processed, colloidal ZnO nanorods and laminated cellulose ionogels enable the fabrication of the first electrolyte‐gated, flexible circuits on paper, which operate at bending radii down to 1.1 mm.     

Spectrum sharing in multi-channel cooperative cognitive radio networks: a coalitional game approach

In this paper, we study a coalitional game approach to resource allocation in a multi-channel cooperative cognitive radio network with multiple primary users (PUs) and secondary users (SUs). We propose to form the grand coalition by grouping all PUs and SUs in a set, where each PU can lease its spectrum to all SUs in a time-division manner while the SUs in return assist PUs’ data transmission as relays. We use the solution concept of the core to analyze the stability of the grand coalition, and the solution concept of the Shapley value to fairly divide the payoffs among the users. Due to the convexity of the proposed game, the Shapley value is shown to be in the core. We derive the optimal strategy for the SU, i.e., transmitting its own data or serving as a relay, that maximizes the sum rate of all PUs and SUs. The payoff allocations according to the core and the Shapley value are illustrated by an example, which demonstrates the benefits of forming the grand coalition as compared with non-coalition and other coalition schemes.     

Activity of two lignin biosynthesis enzymes during development of a maize internode

To ascertain the temporal relationships of phcnylpropanoid and lignin pathway enzymes, phenylalanine ammonia-lyase (PAL) and cinnamyl alcohol- NADPH dehydrogenase(CAD), with lignin concentration, PAL and CAD activities and lignin concentrations were assessed during progressive development of the 10th internode in maize (Zea mays L). Enzyme activities were quantified and lignin concentrations were determined by the detergent system of fiber fractiona- tion from lower, middle, and upper sections of the elongating internode harvested 3, 5, 7, 9, 11, 13, and 15 days after the internode had reached 10 mm in length. Over 15 days, a coordinated, sequential, and basipetal pattern of enzyme activities and lignin accumulation evolved through the internode, spanning the stages of rapid elongation, cellular differentiation, and secondary cell wall formation. PAL activity was initiated first, rising to peak activity in elongating tissue, and falling basipetally in tissues as they matured. CAD activity rose in fully elongated, maturing internode tissue where PAL activity was waning following its peak activity. Lignin accumulated in tissues with high CAD activity. CAD activity and lignin deposition patterns were similar: simultaneously increasing in activity and deposition over time while activity and deposition also shifting basipetally through the internode, keeping pace with secondary cell wall formation. Lignin concentration correlated significantly with CAD, but not with PAL.     

Correction for ambiguous solutions in factor analysis using a penalized least squares objective

Factor analysis is a powerful tool used for the analysis of dynamic studies. One of the major drawbacks of factor analysis of dynamic structures (FADS) is that the solution is not mathematically unique when only nonnegativity constraints are used to determine factors and factor coefficients. In this paper, a method to correct for ambiguous FADS solutions has been developed. A nonambiguous solution (to within certain scaling factors) is obtained by constructing and minimizing a new objective function. The most common objective function consists of a least squares term that when minimized with nonnegativity constraints, forces agreement between the applied factor model and the measured data. In our method, this objective function is modified by adding a term that penalizes multiple components in the images of the factor coefficients. Due to nonuniqueness effects, these factor coefficients consist of more than one physiological component. The technique was tested on computer simulations, an experimental canine cardiac study using 99mTc-teboroxime, and a patient planar 99mTc-MAG3 renal study. The results show that the technique works well in comparison to the truth in computer simulations and to region of interest (ROI) measurements in the experimental studies.     

Inverted Organic Solar Cells with Sol–Gel Processed High Work‐Function Vanadium Oxide Hole‐Extraction Layers

For large‐scale and high‐throughput production of organic solar cells (OSCs), liquid processing of the functional layers is desired. We demonstrate inverted bulk‐heterojunction organic solar cells (OSCs) with a sol–gel derived V₂O₅ hole‐extraction‐layer on top of the active organic layer. The V₂O₅ layers are prepared in ambient air using Vanadium(V)‐oxitriisopropoxide as precursor. Without any post‐annealing or plasma treatment, a high work function of the V₂O₅ layers is confirmed by both Kelvin probe analysis and ultraviolet photoelectron spectroscopy (UPS). Using UPS and inverse photoelectron spectroscopy (IPES), we show that the electronic structure of the solution processed V₂O₅ layers is similar to that of thermally evaporated V₂O₅ layers which have been exposed to ambient air. Optimization of the sol gel process leads to inverted OSCs with solution based V₂O₅ layers that show power conversion efficiencies similar to that of control devices with V₂O₅ layers prepared in high‐vacuum.     

Enhancement in Organic Photovoltaic Efficiency through the Synergistic Interplay of Molecular Donor Hydrogen Bonding and π‐Stacking

For organic photovoltaic (OPV) cells based on the bulk heterojunction (BHJ) structure, it remains challenging to rationally control the degree of phase separation and percolation within blends of donors and acceptors to secure optimal charge separation and transport. Reported is a bottom‐up, supramolecular approach to BHJ OPVs wherein tailored hydrogen bonding (H‐bonding) interactions between π‐conjugated electron donor molecules encourage formation of vertically aligned donor π‐stacks while simultaneously suppressing lateral aggregation; the programmed arrangement facilitates fine mixing with fullerene acceptors and efficient charge transport. The approach is illustrated using conventional linear or branched quaterthiophene donor chromophores outfitted with terminal functional groups that are either capable or incapable of self‐complementary H‐bonding. When applied to OPVs, the H‐bond capable donors yield a twofold enhancement in power conversion efficiency relative to the comparator systems, with a maximum external quantum efficiency of 64%. H‐bond promoted assembly results in redshifted absorption (in neat films and donor:C₆₀ blends) and enhanced charge collection efficiency despite disparate donor chromophore structure. Both features positively impact photocurrent and fill factor in OPV devices. Film structural characterization by atomic force microscopy, transmission electron microscopy, and grazing incidence wide angle X‐ray scattering reveals a synergistic interplay of lateral H‐bonding interactions and vertical π‐stacking for directing the favorable morphology of the BHJ.     

Numerical Simulation of Waveguides of Arbitrary Cross-Section

Finite difference equations are derived for the simulation of dielectric waveguides using an H_z-E_z formulation defined on a nonuniform triangular grid. The resulting equations may be solved as a banded eigenproblem for waveguide structures of arbitrary shape composed of regions of piecewise constant isotropic dielectric, and all transverse fields then computed from the solutions. Benchmark comparisons are presented for problems with analytic solutions, as well as a sample calculation of the propagation loss of a hollow Bragg fiber.     

Remote plasma etching of titanium nitride using NF3/argon and chlorine mixtures for chamber clean applications

To avoid plasma induced erosion of chamber hardware, the application of remote plasma sources to activate the etch gases was introduced. We present results on the etch behaviour of titanium nitride (TiN) using mixtures of NF₃, Cl₂ and argon. The gas mixture was excited in a remote plasma source and then routed through a reaction chamber to study the etch behaviour of TiN samples which simulate the situation at the chamber walls. The dependency of the TiN etch rate on temperature, gas flow, composition and pressure was examined. While the temperature (studied in the range 25-300 °C) turned out to be the most sensitive parameter, the general etch rate was mainly dependent on the availability of atomic fluorine. Etch products and NF₃/Cl₂ dissociation have been monitored by quadrupole mass spectrometry and infrared spectroscopy. While NF₃ showed a high decomposition up to 96%, chlorine decomposition was not observed. However the addition of chlorine increased the etch rates up to 260% in the low pressure/low temperature regime. Surface effects of chlorine addition are indicated by X-Ray Photoelectron Spectrometry and REM surface analysis.     

A Fourth Order Bandpass Delta-Sigma Modulator with Digitally Programmable Passband Frequency

The design and implementation of a fourth order switched-capacitorbandpass delta-sigma modulator with digitally programmable passbandis described. The quantization noise null can be programmed from0.4 (0.2f_s) to 0.6(0.3f_s) in steps of 0.01 (f_s/200)by changing digital switch settings. This design enables theA/D conversion of a bandpass signal with digital tuning of thecenter frequency for application in systems such as a transceiverIF stage. The modulator IC measures 4.8mm² in a2µ m CMOS process and achieves an SNR of 47 and59 dB over a 0.01 bandwidth at sampling ratesof 2.358 MHz and 1.25 MHz, respectively.