Net air emissions from electric vehicles: the effect of carbon price and charging strategies

Plug-in hybrid electric vehicles (PHEVs) may become part of the transportation fleet on time scales of a decade or two. We calculate the electric grid load increase and emissions due to vehicle battery charging in PJM and NYISO with the current generation mix, the current mix with a $50/tonne CO(2) price, and this case but with existing coal generators retrofitted with 80% CO(2) capture. We also examine all new generation being natural gas or wind+gas. PHEV fleet percentages between 0.4 and 50% are examined. Vehicles with small (4 kWh) and large (16 kWh) batteries are modeled with driving patterns from the National Household Transportation Survey. Three charging strategies and three scenarios for future electric generation are considered. When compared to 2020 CAFE standards, net CO(2) emissions in New York are reduced by switching from gasoline to electricity; coal-heavy PJM shows somewhat smaller benefits unless coal units are fitted with CCS or replaced with lower CO(2) generation. NO(X) is reduced in both RTOs, but there is upward pressure on SO(2) emissions or allowance prices under a cap.     

Effect of ultraviolet and far infrared radiation on microbial decontamination and quality of cumin seeds

Abstract: Cumin seeds might be exposed to a high level of natural bacterial contamination, and this could potentially create a public health risk besides leading to problems in exportation. Ultraviolet (UVC) and far infrared (FIR) radiation has low penetration power, and due to that, there might be no detrimental defects to the products during a possible decontamination process. Therefore, the objective of this study was to determine the effect of UVC and FIR treatment on microbial decontamination and quality of cumin seeds. For this purpose, FIR treatment at different exposure times and temperatures were applied followed by constant UVC treatment with an intensity of 10.5 mW/cm² for 2 h. Total mesophilic aerobic bacteria of the cumin seeds were decreased to the target level of 10⁴ CFU/g after 1.57, 2.8, and 4.8 min FIR treatment at 300, 250, and 200 °C, respectively, following a 2 h UVC treatment. Under the given conditions, a complete elimination for total yeast and molds were obtained while there were no significant changes in volatile oil content and color of the cumin seeds. Consequently, combined UVC and FIR treatment was determined to be a promising method for decontamination of the cumin seeds. Practical Application: This research attempts to apply UVC and far infrared (FIR) radiation for pasteurization of cumin seeds. The data suggested that combined UVC and FIR radiation treatments can become a promising new method for pasteurization of cumin seeds without causing any detrimental defect to the quality parameters. The results of this industry partnered (Kadioglu Baharat, Mersin, Turkey— http://www.kadioglubaharat.com ) study were already applied in industrial scale production lines.     

Tailoring the crystal structure of individual silicon nanowires by polarized laser annealing

We study the effect of polarized laser annealing on the crystalline structure of individual crystalline-amorphous core-shell silicon nanowires (NWs) using Raman spectroscopy. The crystalline fraction of the annealed spot increases dramatically from 0 to 0.93 with increasing incident laser power. We observe Raman lineshape narrowing and frequency hardening upon laser annealing due to the growth of the crystalline core, which is confirmed by high resolution transmission electron microscopy (HRTEM). The anti-Stokes:Stokes Raman intensity ratio is used to determine the local heating temperature caused by the intense focused laser, which exhibits a strong polarization dependence in Si NWs. The most efficient annealing occurs when the laser polarization is aligned along the axis of the NWs, which results in an amorphous-crystalline interface less than 0.5 μm in length. This paper demonstrates a new approach to control the crystal structure of NWs on the sub-micron length scale.     

Control of domain wall pinning in ferromagnetic nanowires by magnetic stray fields

We have found that the depinning field of domain walls (DWs) in permalloy (Ni(81)Fe(19)) nanowires can be experimentally controlled by interactions between magnetic stray fields and artificial constrictions. A pinning geometry that consists of a notch and a nanobar is considered, where a DW traveling in the nanowire is pinned by the notch with a nanobar vertical to it. We have found that the direction of magnetization of the nanobar affects the shape and local energy minimum of the potential landscape experienced by the DW; therefore, the pinning strength strongly depends on the interaction of the magnetic stray field from the nanobar with the external pinning force of the notch. The mechanism of this pinning behavior is applied for the instant and flexible control of the pinning strength with respect to various DW motions in DW-mediated magnetic memory devices.     

Mass-sensitive detection of gas-phase volatile organics using disk microresonators

The detection of volatile organic compounds (VOCs) in the gas phase by mass-sensitive disk microresonators is reported. The disk resonators were fabricated using a CMOS-compatible silicon micromachining process and subsequently placed in an amplifying feedback loop to sustain oscillation. Sensing of benzene, toluene, and xylene was conducted after applying controlled coatings of an analyte-absorbing polymer. An analytical model of the resonator's chemical sensing performance was developed and verified by the experimental data. Limits of detection for the analytes tested were obtained, modeled, and compared to values obtained from other mass-sensitive resonant gas sensors.     

Host-guest chemistry in the gas phase: selected fragmentations of CB[6]-peptide complexes at lysine residues and its utility to probe the structures of small proteins

The gas phase host-guest chemistry between cucurbit[6]uril (CB[6]) and peptide is investigated using electrospray ionization mass spectrometry (ESI-MS). CB[6] exhibits a high preference to interacting with a Lys residue in a peptide forming a CB[6]-peptide complex. Collisionally activated CB[6] complexes of peptides yield a common highly selective fragment product at m/z 549.2, corresponding to the doubly charged CB[6] complex of 5-iminiopentylammonium (5IPA). The process involves the formation of an internal iminium ion, which results from further fragments to an a-type ion from a y-type ion, and the resulting 5IPA ion threads through CB[6]. Numerous peptides are investigated to test the generality of the observed unique host-guest chemistry of CB[6]. Its potential utility in probing protein structures is demonstrated using CB[6] complexes of ubiquitin. Low-energy collision induced dissociation yields CB[6] complex fragments, and further MS(n) spectra reveal details of the CB[6] binding sites, which allow us to deduce the protein structure in the solution phase. The mechanisms and energetics of the observed reactions are evaluated using density functional theory calculations.     

Compound-specific chlorine isotope analysis: a comparison of gas chromatography/isotope ratio mass spectrometry and gas chromatography/quadrupole mass spectrometry methods in an interlaboratory study

Chlorine isotope analysis of chlorinated hydrocarbons like trichloroethylene (TCE) is of emerging demand because these species are important environmental pollutants. Continuous flow analysis of noncombusted TCE molecules, either by gas chromatography/isotope ratio mass spectrometry (GC/IRMS) or by GC/quadrupole mass spectrometry (GC/qMS), was recently brought forward as innovative analytical solution. Despite early implementations, a benchmark for routine applications has been missing. This study systematically compared the performance of GC/qMS versus GC/IRMS in six laboratories involving eight different instruments (GC/IRMS, Isoprime and Thermo MAT-253; GC/qMS, Agilent 5973N, two Agilent 5975C, two Thermo DSQII, and one Thermo DSQI). Calibrations of (37)Cl/(35)Cl instrument data against the international SMOC scale (Standard Mean Ocean Chloride) deviated between instruments and over time. Therefore, at least two calibration standards are required to obtain true differences between samples. Amount dependency of δ(37)Cl was pronounced for some instruments, but could be eliminated by corrections, or by adjusting amplitudes of standards and samples. Precision decreased in the order GC/IRMS (1σ ≈ 0.1‰), to GC/qMS (1σ ≈ 0.2-0.5‰ for Agilent GC/qMS and 1σ ≈ 0.2-0.9‰ for Thermo GC/qMS). Nonetheless, δ(37)Cl values between laboratories showed good agreement when the same external standards were used. These results lend confidence to the methods and may serve as a benchmark for future applications.     

Tunable photonic bandgap in a one-dimensional superconducting-dielectric superlattice

The transmittance of one-dimensional photonic crystals consisting of superconductor and lossless dielectric has been systematically studied through the transfer-matrix method. Obviously, the shift of the photonic bandgap (PBG) becomes more noticeable by adjusting the thicknesses of the dielectric layers than that of superconductor layers. Furthermore, the number of PBGs can be controlled by varying the thicknesses of dielectric layers. Compared to the thicknesses of the dielectric layers, the width of the PBGs is more sensitive to the thicknesses of the superconductor layers. However, the width of the first PBG promptly varies when the thicknesses of the dielectric layers increase from 0 to 40?nm. If the contribution of the normal conducting electrons of the superconductor is nonnegligible, the temperature of the superconductor has no influence on the width of the PBGs. Moreover, the damp coefficient does not affect the PBGs under low-temperature conditions.