氯甲烷在镁修饰的ZSM-5分子筛催化剂上催化转化研究

在镁修饰的ZSM-5分子筛催化剂上,氯甲烷可以被催化转化为烃类产品。分别采用了离子交换和浸渍的方法来修饰ZSM-5分子筛。离子交换的Mg-ZSM-5催化剂和浸渍的Mg/ZSM-5催化剂都可以提高反应产物中的低碳烯烃的选择性,降低烷烃的选择性,并且保持较高的反应活性,但高的浸渍量对反应活性有一定的影响。NH3-TPD的结果表明,浸渍镁的ZSM-5催化剂的强酸中心数目明显减少。镁的修饰对催化剂酸性的影响导致了产物中低碳烯烃的增加。浸渍Mg的ZSM-5催化剂是潜在氯甲烷转化生成低碳烯烃的催化剂。     

Handover and Uplink Power Control Performance in the 3.84 Mcps TDD mode of UTRA Network

In this article we consider the performance of the 3.84 Mcpstime-division duplex (TDD) mode of UTRA (Universal TerrestrialRadio Access) network. We emphasize two of the radio resourcemanagement algorithms, handover and uplink power control, whoserole in the overall system performance is studied extensively.First, a handover algorithm used in WCDMA (Wideband Code DivisionMultiple Access) standard is considered in a TDD-mode operation.This gives rise to a careful setting of different handoverparameters, and the evaluation of the effects to the systemperformance. Secondly, the specified uplink power controlalgorithm is considered. Since it is based on several user-mademeasurements which may involve both random and systematic errors acareful study about the suitability of the power control scheme iscarried out.     

制备条件对硅基介孔分子筛孔结构的影响

采用溶剂热法制备了硅基介孔分子筛材料,较系统地考察了晶化温度、晶化时间及焙烧温度等因素对其结构的影响,并利用N2吸附手段进行了表征.结果表明,晶化温度和晶化时间能明显影响硅基介孔材料的结构,而过高的焙烧温度易导致介孔结构的塌陷.     

介孔-大孔结构无定形硅-铝催化剂的核磁共振研究

合成了具有介孔-大孔双模型分级结构的无定形硅-铝催化剂,利用硅和铝核的固体魔角核磁共振谱,考察了合成样品中硅和铝结构上的原子特征.     

CHAOTIC HYDRODYNAMICS IN HORIZONTAL GAS-LIQUID BUBBLY FLOW

ＮＯＭＥＮＣＬＡＴＵＲＥｄ———ｅｍｂｅｄｄｉｎｇｄｉｍｅｎｓｉｏｎ ,ｄｉｍｅｎｓｉｏｎｌｅｓｓＣｄ(ｒ)———ｃｏｒｒｅｌａｔｉｏｎｓｕｍ ,ｄｉｍｅｎｓｉｏｎｌｅｓｓＮ———ｎｕｍｂｅｒｏｆｐａｉｒｓｏｆｐｏｉｎｔｓｏｎｔｈｅｒｅｃｏｎ ｓｔｒｕｃｔｅｄａｔｔｒａｃｔｏｒ,ｄｉｍｅｎｓｉｏｎｌｅｓｓｒ———ｓｃａｌｉｎｇｄｉｓｔａｎｃｅ ,ｄｉｍｅｎｓｉｏｎｌｅｓｓＤｃ ———ｃｏｒｒｅｌａｔｉｏｎｄｉｍｅｎｓｉｏｎ ,ｄｉｍｅｎｓｉｏｎｌｅｓｓＫ———Ｋｏｌｍｏｇｏｒｏｖｅｎｔｒｏｐｙ ,ｂｉｔｓ/ｓＲ…     

渤海绥中油田J3井疏水缔合聚合物驱数值模拟研究

为了进一步提高渤海油田J3井区缔合聚合物驱的技术经济效果,在渤海油田室内配方和先导性矿场试验研究基础上,利用化学驱油藏数值模拟软件FAPMS,分析和研究了高浓度缔合聚合物前置段塞、主段塞的大小和浓度以及段塞组合方式对驱油效果的影响,优化设计了渤海绥中油田J3井区块矿场试验的最佳注入程序及段塞大小。结果表明,通过对不同浓度的疏水缔合聚合物注入的前置段塞及主段塞和梯度式后续段塞的优化后,原油采收率比未优化时提高了约10个百分点。研究表明,渤海油田应该高度重视聚合物驱的注入方式和段塞优化设计,进一步提高聚合物的技术经济效果。     

基于MODBUS协议的激光雕刻切割系统HMI人机交互设备

近年来,国内激光雕刻切割控制器技术发展迅速,基于PC的传统控制器已相当成熟.为了显著提高工业生产效率,适应工业生产规模扩张的需要以及工业对系统稳定性要求的提高,目前国内几家专业运动控制器厂家已经实现了激光雕刻切割控制器的完全脱机运行.本文针对脱机控制器的需要设计一款人机交互设备,该设备采用AT89C55WD单片机为主控制器,采用标准的MODBUS协议实现HMI与脱机控制器的可靠通讯.     

电子产品研制阶段可靠性增长试验研究

结合工程实际经验,深入讨论了可靠性增长过程及实现途径,在保持试验条件和改进过程不变的条件下,实施了对具体型号电子产品的可靠性增长试验,达到了预期的可靠性增长目标,并且利用可靠性增长试验的数学模型(AMSAA模型)来评估产品的可靠性增长,对开展可靠性增长与可靠性增长试验工作具有重要的实际意义.     

光刻版图形处理过程的计算机仿真

采用有限状态机模型来仿真集成电路行业中光刻版图形的处理过程,涵括了层次处理、涨缩处理和反转处理。将不同的处理过程定义为相应的状态,将图形处理要求定义为输入条件触发状态转换。该模型已应用于光刻版数据处理的电子设计自动化软件。     

Intra- and inter-laboratory reproducibility of estrogen and progesterone receptor enzyme immunoassay in breast cancer cytosol samples--a Swedish multicenter study. Swedish Society of Cancer Study Group

Estrogen and progesterone receptor analysis results were compared within and between six laboratories in Sweden using frozen breast cancer cytosol samples, and the same technique (enzyme immunoassay, Abbott Laboratories). The concordance in receptor status (positive vs. negative) was excellent (98.4% (571/580)). The discordant results were attributable to values near cut-off (n = 4) or outliers (n = 5), the latter probably being due to analytical errors. One laboratory reported significantly higher ER concentrations than the others; thus caution should be observed when comparing absolute values from different centers. For PgR there were similar differences between the laboratories. However, the intra- and inter-laboratory differences were small compared with the overall variability in ER and PgR content between different samples in a large database. The range of the median intra-laboratory coefficient of variation was 11-23% for ER and 12-19% for PgR, indicating that there is room for improvement in the quality of assay performance.