Influences of artificial pre-stressing on ply stresses and tensile properties of Vinylon fibre-reinforced aluminium laminates (VIRALL)

A simple micromechanical model based primarily upon the rule-of-mixtures is developed which allows prediction of the effects of fibre preload on the ply stresses (i.e., the initial residual stresses of fibre, adhesive and matrix) induced within VIRALL laminates, and the tensile stress-strain curves and mechanical properties of VIRALL laminates. The analysis of the ply stresses of VIRALL laminates indicates that pre-stressing will dramatically influence the ply stresses. The predicted tensile stress-strain curves of VIRALL laminates are in good agreement with the experimental curves and the results show that the stress-strain curves of VIRALL laminates move upwards when the prestress increases. The predicted tensile mechanical properties of VIRALL laminates at room temperature show good agreement with those obtained experimentally; both show that prestress can improve the tensile properties (i.e., elastic limit strength, 0.2% yield strength and failure strength) of VIRALL laminates.     

超辐射发光二极管的结构特性及其应用

近几年来,由于超辐射发光二极管在光纤陀螺和光时域反射仪等方面的重要应用,已引起了人们的极大关注,许多国家都在竞相研制和开发.本文综述了目前超辐射发光二极管的主要结构和特性及其应用前景.     

单片InGaAs／InP PIN PD阵列

文章简要地介绍了ＩｎＧａＡｓ／ＩｎＰ ＰＩＮ ＰＤ阵列的制作现状及其应用和发展趋势。     

Conformation and activity of mannose- and N-acetylgalactosamine-specific lectins from Vicia villosa seeds

The conformation of two Vicia villosa lectins specific for mannose and N-acetylgalactosamine, respectively, was studied by circular dichroism. Both showed a broad negative CD band around 220 nm and a positive one above 190 nm. CD data analysis indicated that they were rich in beta-sheet. However, they differed in conformational stability against extreme pH, at elevated temperature, and in guanidine hydrochloride and sodium dodecyl sulfate solutions. The unusual feature was that the conformation of N-acetylgalactosamine-specific lectin was virtually unaltered in 6 M guanidine hydrochloride and 7.5 mM surfactant.     

松香及其衍生物在浮选分离中的应用

介绍了松香的来源、化学组成及理化性质；讨论了松香及其衍生物在非硫化物矿浮选分离、有色金属离子的浮选分离以及从水溶液中浮选分离有机物等方面的应用情况。     

半连续式棒材轧机在线捆扎机及其工艺设置

由北京冶金设备制造厂设计的YSK6型钢丝捆扎机，共设有并列6台棒材捆扎车，每台捆扎车由中间收送机、成形捆扎机、液压装置、捆扎辊道和台车组合而成。按生产工艺参数要求，整个成型捆扎周期为30秒。捆扎后的棒材在成品称重时用电子秤，每称量一次均可打印出单次净值、累加值和累加次数值。     

灌溉水库水资源优化调度

以榆社云簇水库为例、以水库灌区多种作物所能达到的最大产值为目标函数，本文研究了一套灌溉水库用水优化调度模型。它包括计划调度模型和实时调度模型两部分，适用于干旱半干旱地区灌溉水量不足的水库的用水调度。     

一种图文数据库系统的设计与实现

随着计算机技术的发展和水平的提高，图像，声音，图形等多媒体信息逐步应用于管理信息系统之中。文章中提出了图文数据库系统设计中存在的三个基本问题。讨论了介绍了图文数据库系统的设计方法和实现技术。     

n-Al2O3/Ni复合镀层的组织与滑动磨损性能研究

用电刷镀技术制得了镍基n-Al2O3复合镀层，并对镀层的滑动磨损性能进行了试验研究。纳米复合镀层的表面形貌比较细腻，镀层中纳米粒子分布均匀，与基质金属结合紧密。镀层显微硬度达到HV700，比快速镍镀层提高约40％。滑动磨损试验结果表明，随着纳米粒子含量的增大，镀层的耐磨性提高，摩擦系数也呈增大趋势；但当镀层中n-Al2O3粒子的超过2.56%(质量分数）时，镀层的耐磨性显著下降。纳米复合镀层的磨损机制以疲劳磨损为主，而快速镍底层以粘着磨损为主。