快硬硫铝酸盐水泥浆体-矾土集料界面的微结构

用XRD层析技术、SEM/EDAX和DTA等手段测定了矾土集料-硬化硫铝酸盐水泥浆体界面区的组成、微结构及形貌,同时用XRD线宽法测定了界面区中AFt晶体尺寸及其分布。研究发现,在矾土界面区中,AFt主要以胶体形态富集,C(?)H_2以晶体形态富集,界面区的厚度为70μm左右。为此,提出了矾土集料界面区微结构的形成机理。     

Novel Ferrimagnetic Material for Fabricating Multilayer Chip Inductors —Low-Temperature-Sintered Ba3Co2−xZnxFe24O41 Hexaferrites

The Zn-substituted planar hexaferrite Ba₃Co_{2− x} Zn _x Fe₂₄O₄₁ ( x =0–1.2) powders were prepared via a citrate precursor method. With an appropriate sintering aid, ceramics with high density could be obtained after sintering at a temperature of less than 900°C. These ceramics exhibit excellent high-frequency properties such as high initial permeability up to 10.0 with cut-off frequencies above 1.1 GHz. The results show that we have exploited novel promising ferrimagnetic materials well suited for multilayer chip inductors or multilayer chip beads applications in the high-frequency range.     

A study on blends of liquid crystalline copolyesters with polycarbonate. I. Compatibility by transesterification

Blends of poly(bisphenol-A carbonate) (PC) and synthesized liquid crystalline poly(oxybenzoate-co-ethylene terephthalate 40/60) (P46) were prepared through meltmixing in a Brabender mixer. The miscibility of the blends at different compositions and blending time was investigated with differential scanning calorimetry. The corresponding morphology of the blends was analyzed with scanning electron microscopy. It was found that for blends containing more than 20% P46 and mixed at 250°C or above the transesterification between PC and P46 took place. This transesterification was confirmed at a blend containing 40% P46 by nuclear magnetic resonance spectroscopy. The transesterification happened first between PC and the ester in the poly(ethylene terephthalate) (PET) block and then between PC and the ester in the polyoxybenzoate (POB) block. At 260°C and after 60 min' blending, the blend containing 30% P46 became an almost compatible system for appearing of a single glass transition temperature. This is also verified by the disappearing of P46 droplets in the PC matrix in the micrographs' observation. After 60 min' of blending, the compatibility of the system can be greatly improved even for the blend containing 40% P46 mixed at 260°C by the micrograph's observation. © 1995 John Wiley & Sons, Inc.     

Raman studies of peroxide formation,decomposition, and reduction on Ba/MgO

Ba/MgO is an active catalyst for the oxidative coupling of methane to form ethane and ethylene. It has been proposed that activation of methane occurs via reaction with peroxide species present at the surface of the catalyst. In the present work, Raman spectroscopy has been used to investigate the formation, decomposition, and reduction of BaO₂ on 4 mol% Ba/MgO. The presence of BaO₂ is evidenced by the presence of a band at 842 cm^–1. The peroxide forms above 300°C but is stable to decomposition at temperatures up to 500°C. Reduction of BaO₂ to BaO proceeds via Ba(OH)₂. BaCO₃ forms when either BaO or BaO₂ is exposed to CO₂. Once formed, BaCO₃ is stable to decomposition in He or O₂ at temperatures up to 500°C. Only BaCO₃ is observed when a mixture of CH₄ and O₂ is passed over the catalyst at 500°C.     

Synthesis and characterization of CdS nanocrystals embedded on solid electrolyte films

In this article nano‐sized CdS crystal embedded in a PEO matrix was successfully prepared by a complex transformation method that is universal for preparing nanosized compounds containing transition metals. The size of embedded CdS particles was in the nanoscale from 2 to 10 nm determined by X‐ray diffusion. The nanosized CdS displayed the expected blue shift of the onset absorbance in the UV spectrum. The amount of blue shift depends upon the dipping time of the PEO–cadmium complex film in a sodium sulfide solution as well as its concentration. The most effective means for adjusting the size of CdS nanocrystals is to change the ratio of the oxygen along with the PEO chain to the cadmium ion in the complex film. The alkali salt in the film would contribute to the conductivity of the composite film. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1263–1268, 2002; DOI 10.1002/app.10459     

Equilibrium and kinetic studies of the extraction of chelated copper(II) anions with Aliquat 336

The equilibrium and kinetics of solvent extraction of Cu²⁺ from aqueous solutions containing equimolar EDTA with Aliquat 336 in n‐decanol and kerosene at 298 K were investigated. The concentrations of Cu²⁺ (8–50 mol m^?3), Cl^? (5–60 mol m^?3), and Aliquat 336 (20–100 mol m^?3) were varied. A semi‐empirical model with three parameters was proposed to describe the equilibrium behavior, in which the non‐idealities in both aqueous and organic phases were considered. Over the ranges studied, the model agreed reasonably well with the experimental data (standard deviation, 15%). The forward and backward reaction rate constants were determined as (5.31 ± 0.16)×10^?6 m^9/4 mol^?3/4 s^?1 and (2.62 ± 0.09)×10^?7 s^?1, respectively, at 298 K. An interfacial reaction mechanism was proposed, which revealed that the reaction between the chelated anions and trimeric amine molecules at the interface was rate limiting. The derived rate laws were consistent with the experimental results. © 2002 Society of Chemical Industry     

Allelochemical resistance of bald cypress,Taxodium distichum,heartwood to the subterranean termite,Coptotermes formosanus

The heartwood of bald cypress,Taxodium distichum (L.) Rich., resisted feeding attack by the Formosan subterranean termite,Coptotermes formosanus Shiraki. Hexane-extracted heartwood, however, was consumed at > 12 times the amount of sound heartwood eaten. A bioassay usingT. distichum sapwood as a feeding substrate was employed to assess the antitermitic activity of successive hexane, acetone, and methanol extracts of heartwood shavings and isolates derived from the active hexane extract. Two fractions, eluted from the crude hexane extract by liquid chromatography, significantly reduced termite feeding compared to the parent extract, while a third fraction was less active than the original hexane extract. Each fraction contained one major component. All three components were structurally related diterpenes. The two most active heartwood constituents were identified by GC-MS and NMR as ferruginol and manool, while the third and least active, but most prevalent, compound in heartwood was identified as nezukol. Results of bioassays suggest that these allelochemicals act principally as feeding deterrents with accompanying termite mortality due to starvation.     

交联过程对交联发泡PP板材性能的影响

以过氧化二异丙苯(DCP)为交联剂，二乙烯基苯为助交联剂，偶氮二甲酰胺为发泡剂，采用化学交联法，使PP树脂在发泡之前交联，并利用压制成型的方法制取了泡孔均匀、细密的泡沫板材。研究了交联剂和助交联剂的用量对凝胶质量分数和板材性能的影响。结果表明：DCP和二乙烯基苯的质量分数分别为0．12％和1．6％时，制品的各项性能较好。     

PAIDD: a hybrid P2P-based architecture for improving data distribution in social networks

Rapid growth in social networks(SNs)presents a unique scalability challenge for SN operators because of the massive amounts of data distribution among large number of concurrent online users.A request from any user may trigger hundreds of server activities to generate a customized page and which has already become a huge burden.Based on the theoretical model and analytical study considering realistic network scenarios,this article proposes a hybrid P2P-based architecture called PAIDD.PAIDD fulfills effective data distribution primarily through P2P connectivity and social graph among users but with the help of central servers.To increase system efficiency,PAIDD performs optimized content prefetching based on social interactions among users.PAIDD chooses interaction as the criteria because user’s interaction graph is measured to be much smaller than the social graph.Our experiments confirm that PAIDD ensures satisfactory user experience without incurring extensive overhead on clients’network.More importantly,PAIDD can effectively achieve one order of magnitude of load reduction at central servers.     

喷雾热解法制备高纯超细氧化铝粉

本文以高纯硫酸铝铵为原料，用喷雾热解法制得纯度大于９９．９％、细度为１０￣２０ｎｍ的高纯超细α－Ａｌ２Ｏ３粉。探讨喷雾热解工艺条件对粉体性能的影响。