Three-dimensional modelling of Non-Newtonian fluid flow in a coat-hanger die

The three-dimensional model of isothermal flow of power-law fluid in a coat-hanger die has been developed using finite element method. The shape of coat-hanger die used in the present model was determined according to the previous analytical design equation which is based on one-dimensional flow model in the manifold and the slot. Because uniform flow rate across the die outlet is most important to achieve uniform thickness of extruded polymer sheet or film, flow rate distribution is mainly examined to determine the valid process condition for the design equation as the design parameters are changed. The effects of fluid property in terms of power-law index and process parameters not considered in one-dimensional design equation such as die inlet size and the presence of land were analyzed. Results show that the manifold angle is the most influencing design parameter on flow rate distribution. When the material of different power-law index from design value is processed, the change of power-law index affects the uniformity of flow rate appreciably.     

Compositional analysis of biodegradable polyphosphoester copolymers using nmr spectroscopic methods

The chemical composition and quantitative molar ratios among all components of biodegradable polyphosphoester copolymers of DL ‐lactide and ethylphosphate were determined by a comprehensive set of NMR spectroscopic methods. The polyphosphoester copolymers studied were synthesized using condensation polymerization of oligomeric DL ‐lactide prepolymers and ethyl dichlorophosphate. Conclusive identification of the chemical shift patterns of all functional groups in the copolymers required additional NMR methods such as ³¹P‐NMR and two‐dimensional ¹H–¹H COSY NMR, in addition to the synthesis and comparative NMR analysis of model compounds possessing identical phosphoester linkages in the polyphosphoester copolymers. For the polymers synthesized using the bulk polycondensation process, ¹H–¹H COSY NMR analysis revealed the presence of a small amount of side products that were undetected by ¹H‐NMR alone. These side reactions most likely occurred between the pendant ethoxy group of the phosphoesters and the hydrogen chloride gas generated in the bulk polycondensation process. ³¹P‐NMR spectra of the copolymers revealed a consistent triple‐peak pattern characteristic of phosphoesters linked to a racemic mixture of D,L ‐lactides. These results offered new insight into the side reactions occurring in bulk polymerization of polyphosphoesters and provided a powerful tool of characterizing complex biodegradable polymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4021–4031, 2003     

利用抽余C5加氢制戊烷

抽余C5目前主要用作燃料，用催化加氢方法可将其制成戊烷。多种金属催化剂对抽余C5有加氢活性,其中Pd-La-Ce/Al2O3在低压下表现出优良的反应活性。工艺条件试验表明:温度、H2/油比(V)对反应的影响较大。在选定的反应条件下(温度130-145℃;H2/油比(V)400;反应压力0.25MPa;液空速0.3h-1),催化剂Pd-La-Ce/Al2O3的500小时稳定性考察表明,该催化剂具有较优的反应活性、选择性和稳定性,通过一次加氢反应即可将烯烃含量达90%以上的抽余C5转化为饱和烃含量大于98%的戊烷产品     

S＆W超选择性裂解炉分区裂解探讨

介绍了S＆W超选择性裂解炉分区裂解改造的情况，包括分区裂解炉的运行情况、对后系统的影响、对产品收率的影响、投用过程存在的问题及处理。指出分区裂解能提高装置的生产能力，而产品的收率基本不变。     

Morphologies and microstructures of tree-like carbon produced at different reaction conditions in a CVD process

Centimeter-size multi-branched tree-like carbon structures have been generated by the catalytic chemical vapor deposition of toluene using ferrocene as the catalyst precursor and investigated by means of SEM, TEM, and EDX. It is found that a temperature of 1000-1200 °C and a carrier gas flow rate of 1000-2500 ml/min are necessary for the generation of the carbon trees. Their morphologies and microstructures change greatly with the changing reaction conditions. The fractal dimensions of the trees are calculated to quantitatively investigate the influence of different reaction temperatures on the morphologies.     

肥皂霜的成分分析及成因研讨

采用红外光谱、气相色谱 ,X-射线能谱、原子吸收光谱、紫外分光光度法及化学法分析了肥皂霜中脂肪酸盐、硅、磷、碳酸盐等成分。其结果如下 :RCOONa:94.82 %;Si O2 :2 .43%;PO3-4:0 .40 %;Na2 CO3:1 .0 8%、水份及挥发物余量。依据测试结果 ,对肥皂冒霜的原因进行了探讨     

钯负载锰氧化物基双金属复合氧化物催化氧化羰基化合成碳酸二苯酯

采用共沉淀法分别制备锰掺杂钨、钒、铋3种双金属复合氧化物载体,以氯化钯为活性组分制备负载型催化剂,并用于苯酚氧化羰基化合成碳酸二苯酯（DPC）。通过气相色谱（GC）、X射线衍射（XRD）、氢气程序升温还原（H₂-TPR）、X射线光电子能谱（XPS）等表征手段,对催化剂结构和性能进行表征。结果表明:钨-锰载体随掺杂比例和焙烧温度升高,逐步形成四氧化三锰晶粒,同时钨渗入锰氧化物晶格中,在掺杂比（物质的量比）为1:1、焙烧温度为600 ℃条件下制备的催化剂性能最佳,DPC收率为5.20%;钒-锰载体在焙烧温度为400 ℃、掺杂比为1:5条件下形成二氧化锰晶相,催化剂性能明显提高,DPC收率为10.46%,而较高的焙烧温度会破坏晶型的完整;铋-锰载体在掺杂比为1:5、焙烧温度为400 ℃条件下制备的催化剂催化效果最好,DPC单程收率可达到13.13%。     

煤制合成气低温甲醇洗配管总结

本文根据以煤为原料的合成氨工艺装置中低温甲醇洗涤净化系统的特点，对其配管在工程设计时的一些特殊要求进行总结，供工程设计人员参考。     

对二甲苯直接电解氧化反应的研究

研究了在有机溶剂、支持电解质和碳棒存在下，对二甲苯的直接电解氧化反应，使用GC－MS方法分析鉴定了主要电解氧化产物，讨论了电解氧化产物成分随电解时间的变化规律，提出了对二甲苯的直接电解氧化反应过程。     

Detecting changes of the Yellow River Estuary via SAR images based on a local fit-search model and kernel-induced graph cuts

The Yellow River Estuary area of China is under great pressure from both human intervention and natural processes. For analysis of the changes in this area, this article presents a novel change-detection method based on a local fit-search model and kernel-induced graph cuts in multitemporal synthetic aperture radar images. Change detection involves assigning a label to every pixel. This task is naturally formulated in terms of energy minimization, which can be effectively solved by graph cuts. The difference image is transformed implicitly by a kernel function so that an alternative to complex modelling of the original data makes the piecewise constant model become applicable for graph cuts formulation. An issue is that graph cuts are sensitive to the initial estimate. The local fit-search model is proposed to approximate to the local histogram while selecting an optimal threshold for the initial labelling, which leads to an effective constraint for graph cuts and computational benefits as well. Visual and quantitative analyses obtained on the Yellow River Estuary data set confirm the effectiveness of the proposed method and that it outperforms the other state-of-the-art methods of change detection.