The effect of aromatics on paraffin mild hydrocracking reactions (WNiPd/CeY–Al2O3)

The conversion of heavy paraffin and aromatics into a high-quality diesel fraction was performed in a microplant using a WNiPd/CeY-alumina catalyst. The effects of aromatics and naphtheno-aromatics on mild hydrocracking of hexadecane were studied at different concentrations. Two catalysts, with and without Pd and thermal treatment, were characterized by FTIR, XPS, and TPD of ammonia and ammonia plus naphthalene to complement previous study about the surface composition. The hydrocracking activity and selectivity were tested using different amounts and types of aromatics. This study demonstrated the presence of two acid strengths that contribute in different ways to paraffin and aromatics isomerization, ring opening, and cracking reactions. The product distribution obtained by mild hydrocracking of n-C₁₆ is between amorphous (SiO₂Al₂O₃) and Y-zeolite type of support. The aromatic adsorption on acid sites reduces the cracking rate and improves the survival of di- and tri-branched paraffin. A model for the path of reaction is discussed to explain the results.     

Studies on the treatment of brilliant green solution by combination microwave induced oxidation with CoFe2O4

In this work the synergistic effects of microwave (MW) irradiation induced oxidation processes and CoFe₂O₄ were studied for the degradation of brilliant green (BG) from aqueous solutions. Under the optimum condition, the ratio of solid to liquid was 1:167 (0.3 g CoFe₂O₄ mixed with 50 mL of 20 mg L⁻¹ BG solution), MW power 600 W, and the time of the irradiation 2 min. And the decolorization rate could reach up to 100%. Further investigation showed that BG was degraded by MW-induced oxidation combined with CoFe₂O₄ surface adsorption. The CoFe₂O₄ could increase the efficiencies of MW degradation and be used repeatedly. The experimental results indicated that the method of MW degradation BG in the presence of CoFe₂O₄ could reduce reaction time and increase product yield.     

Research on the Distant Hybrids of Wheat Obtained via Low-Energy Ion-Beam Implantation

Abstract The whole DNA of soybean was implanted into four varieties of wheat of Zhongyu5, Huaiyin 9628, Wenyou 1, Jimai 5 respectively via ion-beam mediation. There were 5 plantsobtained whose protein content was higher than 18.5%, the highest one was 21.44%. There were 3plants obtained whose protein content was lower than 11.5%, the lowest one was 10.96%. We cansee that the whole DNA of soybean transformed into wheat via ion beam implantation can inducethe increase in wheat protein content dramatically. The result also shows that the transformationefficiency of different gene types of wheat receptor varies greatly that the implanting time has acertain effect on the efficiency of transformation.     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

模糊技术的发展及在相关领域中的应用

本文介绍了模糊技术的发展和现状，以及在相关领域中的应用情况，并且讨论了模糊技术在我国的产业化方向等问题。     

Hybrid integrator backstepping control of robotic manipulators driven by brushless DC motors

In this paper, a hybrid integrator backstepping controller is proposed for robotic manipulators actuated with brushless DC motors in the presence of arbitrary uncertain inertia parameters of the manipulator and the electrical parameters of the actuators. The main features are: 1) the design, requiring at most the joint velocities and stator currents feedback; 2) the semiglobal asymptotic stability of the controller being established in the Lyapunov sense; and 3) suitability of the scheme for multijoint robots. Simulation results are included to demonstrate the tracking performance.     

Instability of diatomic deuterium in fcc palladium

To clarify some of the solid-state aspects of cold fusion in deuterated transition metal electrodes, we have carried out first-principles self-consistent total energy calculations for various configurations of atomic and diatomic deuterium inside fcc palladium. We find that the stability of the Pd+D system is controlled by the relative position of the deuterium-inducedantibonding level with respect to the Fermi energy. The equilibrium D-D distance in dense PdD up to =3 is found to be much larger than the free space value. The calculated Born-Oppenheimer energy surface of diatomic D₂ in crystalline palladiuim is shown to have but metastable local minima whose internuclear separation is at least 0.2 Ålarger than that of the isolated D₂ molecule. We conclude that D₂ incrystalline Pd will have a substantially lower tunneling probability than hitherto thought and that explanation for fusion mechanisms should be sought elsewhere.     

Isobaric vapor—liquid equilibria for binary systems composed of methyl butanoate with ethanol and with propan-1-ol at 114.66 and 127.99 kpa

Vapor-liquid equilibrium data for the binary systems methyl butanoate/ethanol and methyl butanoate/propan-l-ol at pressures of 114.66 and 127.99 kPa are presented. Both mixtures yield an azeotrope, the compositions (ester) of which decrease quasi-linearly as the pressure increases. The experimental data for all the binary mixtures were fitted to a suitable equation and then used for comparison with predictions by ASOG and UNIFAC methods. These group contribution models give a good estimation of activity coefficients with an overall mean error less than 5% for all cases.     

通过细乳液聚合方法制备自交联型有机硅乳液

苯乙烯与甲基丙烯酸-3-三甲氧基硅丙酯(M PS)经细乳液聚合,制得了稳定的自交联型的水分散涂料,用透射电子显微镜(TEM)、动态光散射仪(DLS)和红外光谱(IR)表征了乳胶粒的形态和结构。发现与传统乳液聚合相比,细乳液聚合法可显著提高乳液的稳定性,且M PS加入量的增加会导致乳液稳定性降低。     

Use of mesoporous SBA-15 for nanostructuring titania for photocatalytic applications

SBA15–TiO₂ samples prepared by introducing titanium with a grafting method and having TiO₂ loadings below 15 wt.% have been characterized by XRF, XRD, IR, porosimetry, SEM, HRTEM, and UV–Visible diffuse reflectance. Differently from the samples reported in the literature characterized by a high TiO₂ loading, no evidences have been found for the presence of titania particles inside or outside the mesopores of SBA-15. Three different titanium species were instead evidenced to be present. The first two derive from the reaction of titanium with silanol groups in the corona area of inner SBA-15 walls leading to the formation of either TiO₄ tetrahedral sites (by reaction by hydroxyl nests of surface defect sites) and/or pseudo-octahedral surface sites anchored by two (or more) Si or Ti ions through bridging oxygens. The third species derives from the reaction of titanium in the regions with high sylanol density, e.g. in the micropores located in the corona of SBA-15 channels, leading to the formation of TiO₂-like nanoareas (probably Si-doped) with dimensions of around 1–2 nm maximum. The potential interest of these materials as photocatalysts, for the presence of a TiO₂-like nanoareas highly accessible by reactants, is discussed.