吸收剂量对二甲基硅橡胶与甲基乙烯基硅橡胶分子量和凝胶含量的影响

将ＧＰＣ和特性粘数［η］测定相结合，在室温和－７８℃下，用Ｃｏ~（６０）辐射源辐照，研究了二甲基硅橡胶（ＭＱ，吸收剂量２．０５×１０~３～３．９７×１０~４Ｇｙ）和甲基乙烯基硅橡胶（ＭＶＱ，吸收剂量１０~２～１０~４）分子量和凝胶含量的变化。结果表明，辐照ＭＶＱ较辐照ＭＱ易生成凝胶，在凝胶点前的较低吸收剂量时，溶胶的分子量出现极大值，分子量分布曲线呈单峰；随吸收剂量的增加，分子量分布变窄，分子量降低；出现凝胶的吸收剂量，ＭＱ大约是ＭＶＱ的１０倍。辐照ＭＱ时，凝胶点前的溶胶的分子量分布曲线为双峰，并随吸收剂量的增加，双峰消失，分子量下降；在凝胶点时，分子量出现极大值。     

氟化铵溶解含氟硅渣制备氟硅酸铵的实验研究

以氟化铵溶液和含氟硅渣为原料,通过化学溶解的方式,制备氟硅酸铵产品。考察了反应温度、反应时间、氟化铵溶液浓度和物料配比（氟化铵与二氧化硅的物质的量比）等不同工艺条件对氟硅酸铵收率、二氧化硅转化率的影响。实验结果表明：反应温度为93 ℃、反应时间为60 min、氟化铵溶液质量分数为20%~30%、物料配比为6∶1.1、反应体系搅拌速度为200~300 r/min时,氟硅酸铵的收率和氟化铵的转化率可控制在90%以上。     

荧光法测定N-（α-烷苯氧基）十四酰基牛磺酸钠的临界胶束浓度

研究了一类以苯氧基作疏水支链的新型阴离子表面活性剂——N-（α-烷苯氧基）十四酰基牛磺酸钠（SAPTT）水溶液的紫外吸收光谱、探针（芘）稳态荧光发射光谱及自身稳态荧光发射光谱性质．研究结果表明，荧光探针（芘）法和自身稳态荧光法可用来测定这类表面活性剂的临界胶束浓度（CMC），且测定结果与表面张力法（吊片法）接近；与荧光探针（芘）法相比，对于所研究体系，自身稳态荧光法的灵敏度和准确性均较高，所测得CMC结果与表面张力法（吊片法）能较好地吻合．     

削弱或抑制抗氧剂、光稳定剂作用的有关因素

介绍了削弱或抑制抗氧剂、光稳定剂作用的常见因素及实例，分析了防老化塑料制品发生提前老化现象的可能性和原因。     

IT认证与专业课程相适应的教学研究

随着信息技术的高速发展,IT行业人才的需求与培养成为高校教学改革面临热点问题.本文分析了传统的人才培养模式改革的必要性.通过调整专业课程体系,使IT职业认证与专业课程相适应,开创新的人才培养模式把学生培养成为高素质的技术应用型人才,从而满足市场需求.     

Preparation and modification of macroporous epoxy‐triethylenetetramine resin for preconcentration and removal of Hg(II) in aqueous solution

A novel macroporous resin was prepared from epoxy resin and triethylenetetramine through a polymerization with phase separation. In this experiment, the polyethylene glycol (PEG‐1000) plays a very important part. It was used as solvent, as phase‐separation reagent in the preparation processes, and as the pore‐forming reagent through removing PEG‐1000 from polymer by water‐cleaning process after completing polymerization. The prepared resin was modified by carbon bisulfide and soaked in 1 mol L^?1 NaOH. Its structure was characterized by Fourier transform‐infrared spectra, scanning electron microscopy, and elemental analysis. The adsorption characteristic of the chelating resin was studied by series of experiments. The results show that the chelating resin possesses excellent adsorption characteristic toward trace Hg(II). The recovery can come to 100% when the concentration of Hg(II) is only 0.05 ppm, and the average maximum adsorption capacity of the chelating resin for Hg(II) is 122 mg g^?1. The precision (relative standard deviation) for six replicate adsorbent extraction of 0.01 μg mL^?1 Hg(II) was 1.1%. The accuracy of the proposed procedure was verified by analyzing a standard reference material. Moreover, the chelating resin was applied to two natural samples and also got satisfactory results. That is to say, the chelating resin modified by carbon bisulfide exhibits a high chelating ability toward Hg(II) and can be used as adsorbent for preconcentration and removal of trace Hg(II) in aqueous solution. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:2372–2378, 2006     

Preparation and characterization of amphiphilic block copolymer of polyacrylonitrile‐block‐poly(ethylene oxide)

The synthesis of polyacrylonitrile‐block‐poly(ethylene oxide) (PAN‐b‐PEO) diblock copolymers is conducted by sequential initiation and Ce(IV) redox polymerization using amino‐alcohol as the parent compound. In the first step, amino‐alcohol potassium with a protected amine group initiates the polymerization of ethylene oxide (EO) to yield poly(ethylene oxide) (PEO) with an amine end group (PEO‐NH₂), which is used to synthesize a PAN‐b‐PEO diblock copolymer with Ce(IV) that takes place in the redox initiation system. A PAN‐poly(ethylene glycol)‐PAN (PAN‐PEG‐PAN) triblock copolymer is prepared by the same redox system consisting of ceric ions and PEG in an aqueous medium. The structure of the copolymer is characterized in detail by GPC, IR, ¹H‐NMR, DSC, and X‐ray diffraction. The propagation of the PAN chain is dependent on the molecular weight and concentration of the PEO prepolymer. The crystallization of the PAN and PEO block is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1753–1759, 2003     

压力监测资料在注水开发油田的应用

合理的压力驱替系统对低渗透油藏的高效开发至关重要,而影响此因素的注水参数、注水方式及注采综合调控措施的选取则与注水开发过程中各项压力监测资料息息相关。王窑区是安塞油田最早注水开发的区块,在长达20多年的开发过程中,逐步形成了以压力监测资料为主,结合开发动态资料确定调整措施的经验和方法,对安塞油田开发具有十分重要的指导意义,也为低渗透同类油藏提供借鉴经验。     

MgO－B_2O_3－SiO_2系晶化分形的计算机模拟

采用两段热处理技术，利用Ｘ射线衍射分析、扫描电镜观察等方法研究广２ＭｇＯ－Ｂ＿２Ｏ＿３－ＳｉＯ＿２系的晶化过程，晶化析出相２ＭｇＯ·Ｂ＿２Ｏ＿３的微观形貌具有分形特征，采用密度－密度相关函数法计算其分形维数为１．６３。为揭示２ＭｇＯ·Ｂ＿２Ｏ＿３生长机制，采用Ｍｏｎｔｅ－Ｃａｒｌｏ方法及改进的ＤＬＡ模型对分形生长过程进入计算机模拟。模拟结果与实际分形结构、分形维数相符，表明２ＭｇＯ·Ｂ＿２Ｏ＿３生长是扩散控制凝聚过程。可以预见，分形理论与计算机模拟相结合，将会在探讨未知机理方面发挥重要作用。     

基于同步翻转电荷提取的多压电能量俘获电路

针对多压电能量俘获问题,提出了一种可拓展的自供电同步翻转电荷提取(Extensible Self-Powered Synchronous Inver-sion and Charge Extraction Circuit,ESP-SICE)接口电路.所提出的接口具有自供电、无整流桥设计的特点.电路通过同步电压翻转提高开路电压,通过同步电荷提取可在任意相位差下从多个压电换能器俘获能量而不仅限于时分复用的方式.仿真和实验结果表明,ESP-SICE电路单个压电能量的提取效率可达全桥整流电路最大功率的4.2倍.