Camel milk protein hydrolysates with improved technofunctional properties and enhanced antioxidant potential in in vitro and in food model systems

Camel milk protein hydrolysates (CMPH) were generated using proteolytic enzymes, such as alcalase, bromelain, and papain, to explore the effect on the technofunctional properties and antioxidant potential under in vitro and in real food model systems. Characterization of the CMPH via degree of hydrolysis, sodium dodecyl sulfate-PAGE, and HPLC revealed that different proteins in camel milk underwent degradation at different degrees after enzymatic hydrolysis using 3 different enzymes for 2, 4, and 6 h, with papain displaying the highest degradation. Technofunctional properties, such as emulsifying activity index, surface hydrophobicity, and protein solubility, were higher in CMPH than unhydrolyzed camel milk proteins. However, the water and fat absorption capacity were lower in CMPH compared with unhydrolyzed camel milk proteins. Antioxidant properties as assessed by 2,2-azinobis(3-ethylbenzthiazoline-6-sulfonic acid) and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activities and metal-chelating activity were enhanced after hydrolysis, in contrast to ferric-reducing antioxidant power which showed a decrease after hydrolysis. The CMPH were also tested in real food model systems for their potential to inhibit lipid peroxidation in fish mince and grape seed oil-in-water emulsion, and we found that papain-produced hydrolysate displayed higher inhibition than alcalase- and bromelain-produced hydrolysates. Therefore, the CMPH demonstrated effective antioxidant potential in vitro as well as in real food systems and showed enhanced functional properties, which guarantees their potential applications in functional foods. The present study is one of few reports available on CMPH being explored in vitro as well as in real food model systems.     

Performance of PAM/PEI gel system for water shut‐off in high temperature reservoirs: Laboratory study

A polymer gel is one of the common remediate methods to either reduce or totally block excessive water production in oilfields. Some systems demonstrated an excellent performance in treating the problem like polyacrylamide tert‐butyl acrylate (PAtBA)/polyethylenimine (PEI). In this study, polyacrylamide (PAM) was introduced as a cheap alternative to PAtBA that can tolerate high salinity reservoirs. The thermal stability of the PAM/PEI polymeric gel in saline water was examined at 150°C (302F). Samples prepared in sea water showed better stability compared with distilled and field water. Dynamic rheology and core‐flooding experiments were used to evaluate the PAM / PEI gel system at high temperatures. NaCl and NH₄Cl were evaluated as a possible retarders for delaying the gelation time in order to achieve a successful placement. NH₄Cl was found to be more effective retarder. Core‐flooding tests were conducted in sandstone and carbonate cores. The subject polymer gel was injected at rates typical of those in field applications. The injectivity of PAM/PEI was tested in Berea sandstone cores with initial permeability of ～45 mD. The post‐treatment of the system showed a permeability reduction of ～94% for a period of two weeks. The injectivity in low permeability carbonate cores required more retardation compared with the injectivity in sandstone cores. The gel reduced the permeability to brine in Indiana limestone core by 99.8% for more than 5 months. Rheology of cured gel samples indicated that the gel strength needs about one day of curing in the core for the strength to stabilize. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41869.     

Assessment of a regulatory sanitization process in Egyptian dairy plants in regard to the adherence of some food-borne pathogens and their biofilms

Food-borne pathogens may develop certain strategies that enable them to defy harsh conditions such as chemical sanitization. Biofilm formation represents a prominent one among those adopted strategies, by which food-borne pathogens protect themselves against external threats. Thus, bacterial biofilm is considered as a major hazard for safe food production. This study was designed to investigate the adherence and the biofilm formation ability of some food-borne pathogens on stainless steel and polypropylene surfaces using chip assay, and to validate regular sanitizing process (sodium hypochlorite 250mg/L) for effective elimination of those pathogens. Sixteen pathogenic bacterial strains, previously isolated from raw milk and dairy products at Zagazig city, Egypt (9 Staphylococcus aureus, 4 Cronobacter sakazakii and 3 Salmonella enterica serovar Typhimurium), were chosen for this study. Strains showed different patterns of adherence and biofilm formation on tested surfaces with minor significance between surfaces. The ability of sodium hypochlorite to completely eradicate either adhered or biofilm-embedded pathogens varied significantly depending on the strain and type of surface used. Whilst, sodium hypochlorite reduced tested pathogens counts per cm(2) of produced biofilms, but it was not able to entirely eliminate neither them nor adherent Cronobacter sakazakii to stainless steel surface. This study revealed that biofilm is considered as a sustainable source of contamination of dairy products with these pathogens, and also emphasized the need of paying more attention to the cleaning and sanitizing processes of food contact surfaces.     

Effect of feed pressure on the performance of the photovoltaic powered reverse osmosis seawater desalination system

This paper describes the potential of the development of a seawater desalination system that combines the technologies of reverse osmosis (RO) and photovoltaic (PV) to deliver 100 m³/day of sweet water. Silicon cells are chosen for the PV array and the polyamide thin-film composite seawater Filmtec membranes are selected for the RO system. The software ROSA is adopted to study the influences of the feed pressure on the performance of the system. It is found that as the feed pressure increases, the specific energy of the plant decreases but the percentage of recovery increases.     

An iterative approach to synthesize business process templates from compliance rules

Companies have to adhere to compliance requirements. The compliance analysis of business operations is typically a joint effort of business experts and compliance experts. Those experts need to create a common understanding of business processes to effectively conduct compliance management. In this paper, we present a technique that aims at supporting this process. We argue that process templates generated out of compliance requirements provide a basis for negotiation among business and compliance experts. We introduce a semi-automated and iterative approach to the synthesis of such process templates from compliance requirements expressed in Linear Temporal Logic (LTL). We show how generic constraints related to business process execution are incorporated and present criteria that point at underspecification. Further, we outline how such underspecification may be resolved to iteratively build up a complete specification. For the synthesis, we leverage existing work on process mining and process restructuring. However, our approach is not limited to the control-flow perspective, but also considers direct and indirect data-flow dependencies. Finally, we elaborate on the application of the derived process templates and present an implementation of our approach.     

Proportional damping approximation using the energy gain and simultaneous perturbation stochastic approximation

The design of vector second-order linear systems for accurate proportional damping approximation is addressed. For this purpose an error system is defined using the difference between the generalized coordinates of the non-proportionally damped system and its proportionally damped approximation in modal space. The accuracy of the approximation is characterized using the energy gain of the error system and the design problem is formulated as selecting parameters of the non-proportionally damped system to ensure that this gain is sufficiently small. An efficient algorithm that combines linear matrix inequalities and simultaneous perturbation stochastic approximation is developed to solve the problem and examples of its application to tensegrity structures design are presented.     

47—THE FORM TAKEN BY THREADS LAID ON A MOVING BELT. PART II: MECHANISMS AND THEORY

It is shown that the form of a laid-down thread can be expressed mathematically by the equation of a modified cycloid when the speed ratio between the feed and the belt is within a certain range. The experimental form is found to be reasonably close to the theoretical form. The theoretical form can be predicted if the radius of the circular coil with the belt stationary, the feed speed, and the belt speed are known, The condition for laying down the thread in a form of overlapping loops is deduced. A strobo-photographic method is used to clarify the existence of different mechanisms under different conditions.     

A Screening Technique for Fabric Handle

An objective screening technique for fabric handle is presented. This method is based on the use of a simple device fitted to a tensile testing machine, and measures the force generated while passing a fabric specimen through a ring. The method proved capable of detecting differences in fabric handle between comparable fabrics, as illustrated by studies on shirting fabrics, and on fabrics with functional finishes. The results were validated by comparison with measurements of fabric mechanical properties obtained from the KESF (Kawabata Evaluation System for Fabrics). The handle force measurement gives a summed single value result for fabric handle.     

Simultaneous kinetic method for the determination of vitamin C, citrate and oxalate employing the Kalman filter

A kinetic method for the determination of vitamin C, citrate and oxalate in their mixture is described. The method involves the use of cerium(IV) as an oxidant and measurement of reaction rates spectrophotometrically by following the decrease in absorbance of cerium(IV) at 410 nm. The adaptive Kalman filter was used for data manipulation and analysis. It is shown that the use of the Kalman filter is superior to the classical differential kinetic methods owing to its suitability for the determination of analytes that react with a single reagent and exhibit a reaction rate constant ratio of less than 1.5. The results obtained were found to be highly precise and accurate even in the presence of some expected interferents.