Characteristics of Zinc Corrosion and Formation of Conversion Films on the Zinc Surface in Acidic Solutions of Cr(III) Compounds

The influence of the components of an acidic solution: Cr(III) nitrate-malonic acid-Co(II) salt and treatment conditions on zinc dissolution and formation of Chromate films as well as on their decorative and protective properties have been studied using the analytical, XPS, structural and accelerated corrosion test methods. An organic acid is the main component, which has an essential influence on zinc dissolution and formation of Chromate films as well as their decorative and protective properties. The influence of organic acid is directly related with the state of the Cr³⁺ ions in chromating solution. When the Cr³⁺ ions are in the form of hexaaquaions, the organic acid increases the quantities of the zinc dissolved and the Cr(III) deposited on the zinc surface (especially at 60°C). It also predetermines the formation of a thick, porous Chromate film with large cracks at 60°C. Its decorative and protective properties are rather poor. When Cr³⁺ ions are in the form of a complex with organic acid, the quantities of the zinc dissolved and the Cr(III) deposited on the zinc surface significantly decrease and thinner Chromate films with an even surface, good decorative appearance and high corrosion resistance are formed Decorative blue-bright Cr(VI)-free films with a slight iridescent tint, obtained in solution, containing Cr(III) nitrate (0.2), malonic acid (0.3) and Co(II) nitrate (0.02) mol dm^?3, at p H 1.6-2.0 at room temperature over 30–60 s, possess corrosion resistance (192–240 h in a salt spray chamber) similar to that of iridescent Chromate films, obtained in acidic Cr(VI) solution.     

Biodiesel Production from Waste Cooking Oil by Enzymatic Catalysis Process

Biodiesel is an excellent option for reducing dependence on fossil fuels with environmental advantages by reducing hazardous emissions. The enzymatic transesterification has attracted the attention of researchers in the last decade and the advantages of enzymatic catalysis show that the production of biodiesel by this route has good potential, mainly because it is friendly environment. For biodiesel, production process by enzyme catalysis is chosen the response surface methodology. It is an experimental strategy to find the best operating conditions oftransesterification reaction to improve the biodiesel quality. The Process has three variables： temperature, molar ratio oil-alcohol and catalyst quantity. The process was monitored by GC-FID （gas chromatography with flame ionization detector）. The yield of the transesterification reaction by enzymatic catalysis decreases with increasing temperature, and may be due to inactivation of the enzyme by denaturation at temperatures above 50 ℃. The second-order design used was the ＂CDC （central design composition）＂ which produced a maximum yield of 95.5% in the transesterification reaction by enzymatic catalysis obtained at a temperature of 45 ℃, molar ratio methanol：oil of 8：1 and a catalyst loading of 8% wt.     

Magnesium oxide prepared via metal-chitosan complexation method: Application as catalyst for transesterification of soybean oil and catalyst deactivation studies

A simple method to prepare magnesium oxide catalysts for biodiesel production by transesterification reaction of soybean oil with ethanol is proposed. The method was developed using a metal-chitosan complex. Compared to the commercial oxide, the proposed catalysts displayed higher surface area and basicity values, leading to higher yield in terms of fatty acid ethyl esters (biodiesel). The deactivation of the catalyst due to contact with CO₂ and H₂O present in the ambient air was verified. It was confirmed that the active catalytic site is a hydrogenocarbonate adsorption site.     

SYBR-Green real-time PCR approach for the detection and quantification of pig DNA in feedstuffs

A real-time polymerase chain reaction assay using primers targeting the porcine-specific mitochondrial 12S rRNA gene and universal eukaryotic primers amplifying a conserved fragment of the nuclear 18S rRNA gene has been developed for the detection and quantification of porcine DNA in food and feedstuffs. The 18S rRNA primers were used as endogenous control for the total content of PCR-amplifiable DNA in the sample. The assay was tested on DNA extracted from raw and heat-treated binary mixtures of porcine tissues in a plant matrix, and on DNA extracted from reference feedstuff samples. Analysis of experimental mixtures demonstrated the suitability of the assay for the detection and quantification of porcine DNA in mixtures containing as little as 0.1%.     

Synthesis and characterization of polyurethane cationomer/MMT hybrid composite

BACKGROUND: The development of polymeric nanocomposites incorporating intercalated or exfoliated layered silicate clays into the organic matrix has been substantially motivated by the significant improvements induced by the presence of the inorganic component. Moreover, understanding and controlling the dispersion of inorganic layers into segmented polyurethane matrices by means of ionic interactions, and exploiting these interactions to enhance physicomechanical behaviour, could be of great interest in the field of polymer nanocomposites. RESULTS: New cationic polyurethane elastomers were prepared starting from poly(butylene adipate)diol (M_n = 1000 g mol^?1), 4,4′‐diphenylmethane diisocyanate, 1,4‐butanediol and N‐methyldiethanolamine or N,N′‐β‐hydroxyethylpiperazine, used as potential quaternizable moieties. The characterization of the polymers was achieved using specific analyses employed for the macromolecular samples (Fourier transform infrared and ¹H NMR spectroscopy, thermogravimetric analysis (TGA), gel permeation chromatography). An extension of our research on polymers reinforced with organically modified montmorillonite (OM‐MMT) in order to prepare hybrid composites with improved properties was performed and the resulting materials were characterized using TGA, X‐ray diffraction, atomic force microscopy and scanning electron microscopy. Also, the mechanical properties of the cationic polyurethane/OM‐MMT composites were investigated in comparison with the pristine ionic/non‐ionic polymers and their composites containing non‐ionic polymer blended with OM‐MMT or ionic polymer and unmodified MMT. CONCLUSION: The insertion of the organically modified clay into the polymeric matrix gave an improvement of the mechanical properties of the polyurethane composites, especially the tensile strength and stiffness of the hybrid materials. Copyright © 2009 Society of Chemical Industry     

Diosgenin quantification,characterisation and chemical composition in a tuber collection of Dioscorea spp. in the state of Jalisco,Mexico

Dioscorea spp. tubers are known commonly as camote de cerro to the state of Jalisco, México. Besides its use as food, it contains diosgenin, a raw material used widely for synthesising steroid hormones. The purpose of the present research was to determine diosgenin contents by gas chromatography‐mass spectrometry (GC‐MS), as well as physical and chemical characteristics of sixty Dioscorea spp. accessions cultivated in mesh shade coming from eleven localities in the state of Jalisco. Extraction protocol for diosgenin was maceration combined with ethanol 80%. Significant statistical differences for diosgenin content were found between accessions, finding levels between 0.02 and 0.16 mg kg^?1 in dry basis. Length, weight tuber, proportion pulp/skin, percentage of pulp and percentage of skin showed significant differences. Chemical composition based in fresh weight presented in moisture percentage a range of 71.93–83.26%, crude protein 1.42–1.74%, ashes 0.80–1.16%, lipid 0.13–0.17%, crude fibre 3.80–4.02% and total carbohydrates 13.97–25.44%. Results show that tubers from Jalisco can be an important source of nutrients for consumers.     

Investigating Immune Responses to the scAAV9-HEXM Gene Therapy Treatment in Tay–Sachs Disease and Sandhoff Disease Mouse Models

GM2 gangliosidosis disorders are a group of neurodegenerative diseases that result from a functional deficiency of the enzyme β-hexosaminidase A (HexA). HexA consists of an α- and β-subunit; a deficiency in either subunit results in Tay–Sachs Disease (TSD) or Sandhoff Disease (SD), respectively. Viral vector gene transfer is viewed as a potential method of treating these diseases. A recently constructed isoenzyme to HexA, called HexM, has the ability to effectively catabolize GM2 gangliosides in vivo. Previous gene transfer studies have revealed that the scAAV9-HEXM treatment can improve survival in the murine SD model. However, it is speculated that this treatment could elicit an immune response to the carrier capsid and “non-self”-expressed transgene. This study was designed to assess the immunocompetence of TSD and SD mice, and test the immune response to the scAAV9-HEXM gene transfer. HexM vector-treated mice developed a significant anti-HexM T cell response and antibody response. This study confirms that TSD and SD mouse models are immunocompetent, and that gene transfer expression can create an immune response in these mice. These mouse models could be utilized for investigating methods of mitigating immune responses to gene transfer-expressed “non-self” proteins, and potentially improve treatment efficacy.     

Adsorption of Zn(II) by crosslinked acrylic copolymers with amine functional groups

Adsorption of Zn(II) ions from diluted aqueous solutions by the acrylic copolymer based on ethylacrylate : acrylonitrile : divinylbenzene matrix with different crosslinking degrees and ethylenediamine and triethylenetetramine functional groups was investigated. Adsorption experiments were carried out by batch method. The effects of the pH, initial concentration of zinc, time of contact, and the crosslinking degree of the copolymers were studied. On the basis of Langmuir and Freundlich isotherms, the parameters that characterize the adsorption were determined. The maximum Zn(II) retention capacity value (500 mg g^?1) was obtained for the acrylic copolymer with 2% crosslinking degree and ethylenediamine, as functional groups. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 803–808, 2004     

Area‐Preserving Parameterizations for Spherical Ellipses

We present new methods for uniformly sampling the solid angle subtended by a disk. To achieve this, we devise two novel area‐preserving mappings from the unit square [0,1]² to a spherical ellipse (i.e. the projection of the disk onto the unit sphere). These mappings allow for low‐variance stratified sampling of direct illumination from disk‐shaped light sources. We discuss how to efficiently incorporate our methods into a production renderer and demonstrate the quality of our maps, showing significantly lower variance than previous work.     

Graphical simulation environments for modelling and simulation of integrative physiology

Guyton’s original integrative physiology model was a milestone in integrative physiology, combining significant physiological knowledge with an engineering perspective to develop a computational diagrammatic model. It is still used in research and teaching, with a small number of variants on the model also in circulation. However, though new research has added significantly to the knowledge represented by Guyton’s model, and significant advances have been made in computing and simulation software, an accepted common platform to integrate this new knowledge has not emerged. This paper discusses the issues in the selection of a suitable platform, together with a number of current possibilities, and suggests a graphical computing environment for modelling and simulation. By way of example, a validated version of Guyton’s 1992 model, implemented in the ubiquitous Simulink environment, is presented which provides a hierarchical representation amenable to extension and suitable for teaching and research uses. It is designed to appeal to the biomedical engineer and physiologist alike.