钛铁矿选择氯化法制取人造金红石的热力学与动力学

研究了钛铁矿选择氯化制取人造金红石反应的Fe-Ti-C-O2-Cl2系平衡图，计算了氧与某些氯化物相互作用的自由能变化，采用“通氧一步选择氯化法”，解决了选择氯化“自热”反应持续进行的技术关键，对反应参数进行了实验室，半工业和工业化生产试验研究，研究证明，选择氯化过程的动力学模型是“固体颗粒粒度保持不变的缩核反应模型”，动力学区的活性能为34．33kJ/mol；扩散区的活化能为0．80kJ/mol，研究开发的无筛板沸腾氯化炉可以长期稳定地连续运转，生产出的人造金红石品位为92．10％，经摇床和磁选，品位达到95％，床层单位炉产能达12．4t/(m2.d)，该工艺和设备已成功地应用于工业生产。     

光孤子源的研制

报道了利用增益开关分布反馈半导体激光器，Ｆ－Ｐ光学滤波器及掺饵光纤放大顺研制成光孤子源的研究工作。光孤子源性能稳定，输出的超短光脉冲重复频率为２．５ＧＨｚ脉宽２４，谱宽０．１４ｎｍ，时间带宽积０．４１９，平均输出光功率２．４ｍＷ。     

锥形阀压电薄膜泵的初步研究

提出一种适应高频工作状态的压电薄膜泵结构，实步分析了所采用的锥形阀的工作原理与作用，设计了试验泵结构，加工了样机，通过试验证明了锥形阀的有效性，为进一步的研究打下了基础。     

乙烯裂解炉辐射段流动与燃烧的三维数值模拟

用计算流体力学软件Fluent6.2对中国石油化工股份有限公司燕山分公司E-BA-107乙烯裂解炉辐射段内的流动和燃烧做了三维数值模拟研究。为保证计算的准确性,使用GAMBIT2.2软件建立了与裂解炉实际尺寸完全一致的几何模型;在计算过程中采用了标准k-ε湍流模型、离散坐标辐射模型和有限速率/涡流耗散燃烧反应模型等计算模型。通过模拟计算得到了裂解炉炉膛内的温度、烟气流速及烟气组成的分布:底部燃烧器和侧壁燃烧器的燃烧使附近的炉墙处于温度分布均匀的高温区,为裂解反应提供了均匀的辐射墙面;炉管底部比其他部位的温度低;底部燃烧器的高速射流产生的旋涡可为炉管提供一定的对流热;出口烟气的平均温度和组成的模拟计算值与设计值接近,表明数值模拟有较高的精度,具有实际意义。     

Study of the Mössbauer effect on rare-earth borided surface layers on pure iron

Journal of Materials Science Letters -     

柔性轧制Q390C和Q420C钢板生产实践

目前市场对中厚板的订单具有个性化和多样化的特点，而对于不同强度级别的钢板，化学成分设计往往是不同的，这样会增加不同钢坯冶炼之间衔接的时间及化学成分控制的难度，导致冶炼成本增加，工序复杂化。结合市场需求与生产实际，采用同一Q390低合金高强度钢板坯，通过不同的控轧控冷工艺，对Q390C和Q420C两种强度级别热轧钢板进行了试制。结果表明，通过控轧控冷技术，可以充分发挥细晶强化作用，采用同一Q390低合金高强度钢板坯实现了Q390C和Q420C两个强度级别热轧钢板的柔性生产。试制生产的两种钢板，强塑性及0 ℃冲击功均满足标准要求，Q420C钢板屈服强度达441 MPa以上，抗拉强度达579 MPa以上。采用柔性轧制技术，降低了Q420C高强钢板的生产成本。     

Solid Modeling Error : Analysis and Compensation

ＳｏｌｉｄＭｏｄｅｌｉｎｇＥｒｏｒ：ＡｎａｌｙｓｉｓａｎｄＣｏｍｐｅｎｓａｔｉｏｎ①ＸｕＺｈｉｇａｎｇＨｕａｎｇＫｅｚｈｅｎｇＡｉＸｉｎｇＳｈａｎＬｉａｎｙｅＣｏｌｅｇｅｏｆＭｅｃｈａｎｉｃａｌＥｎｇｉｎｅｅｒｉｎｇ，ＳｈａｎｄｏｎｇＵｎｉｖｅｒｓｉ...     

Influence of Rare-earth Elements on Mechanical Properties of Palladium

The influence of 0.1-0.6 at.-%RE additions (RE= La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Er, Yb) on themechanical properties of Pd was studied. All above RE additions increased not only the strengthproperties at ambient temperature but also the tensile strength, creep rupture time and activation en-ergy at high temperatures, simultaneously increased the elongation of Pd. In the range of dilute con-centration, the strength properties of Pd-RE alloy enhanced linearly with RE concentration. Whenthe strength properties of Pd-RE alloys were normalized at 0.1 at.-%RE, it was found that light REelements had stronger effect on the properties of Pd than heavy RE, whereas Eu, Yb, Ce had anoma-lous effect. In all Pd-RF alloys, Pd-Eu alloy had the highest strength properties, successively Pd-Yband Pd-Ce alloy. The effect mechanisms of RE in alloy, such as purifying impurities, increasingrecrystallization temperature, refining grain size. expanding crystal lattice, increasing dislocation den-sity and decreasing stacking fault energy, forming stable RE oxidation by internal oxidation, and soon, were observed. They were strengthening sensitive factors. The influence of the factors onstrength properties and elongation of Pd was discussed.     

国有化工流通企业的现状分析与发展对策

通过对国有化工流通企业现状的分析。了解其在计划经济与市场经济中的不同表现，并试图找到阻碍其生存与发展的症结所在，提出国有化工企业生存与发展的对策。     

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

The mold filling and solidification simulation for the high pressure die casting (HPDC) and low pressure die casting (LPDC) processes were studied.A mathematical model considering the turbulent flow and heat transfer phenomenon during the HPDC process has been established and paralled computation technique was used for the mold filling simulation of the process.The laminar flow characteristics of the LPDC process were studied and a simplified model for the mold filling process of wheel castings has been developed.For the solidification simulation under pressure conditions,the cyclic characteristics and the complicated boundary conditions were considered and techniques to improve the computational efficiency are discussed.A new criterion for predicting shrinkage porosity of Al alloy under low pressure condition has been developed in the solidification simulation process.