Layered perovskite Ca2.91Na0.09Ti2-xRhxO7 (x?=?0.00, 0.02, 0.04, 0.06) were synthesized by a conventional solid-state reaction. Room temperature ferroelectricity has been confirmed. The remanent polarization increases with an increase of Rh content, which is due to a larger oxygen octahedral distortion by Rh doping. The coercive field increases with Rh doping as the pinning effect of oxygen vacancies reduce the mobility of domain wall. Remanent polarization and coercive field are caused by different mechanisms, so it is possible to modulate them independently to meet the requirement of application in ferroelectric field. The concentration of oxygen vacancy increased with Rh doping, leading to the significant increase of leakage current density. The bandgap of samples doped with Rh drastically decrease and the visible light response of the sample was improved by Rh doping due to the formation of impurity energy levels within the band gap.
Comparative experiments are performed in friction stir welding (FSW) of dissimilar Al/Mg alloys with and without assistance of ultrasonic vibration. Metallographic characterization of the welds at transverse cross sections reveals that ultrasonic vibration induces differences in plastic material flow in two conditions. In FSW, the plastic material in the peripheral area of shoulder-affected zone (SAZ) tends to flow downward because of the weakening of the driving force of the shoulder, and a plastic material insulation layer is formed at the SAZ edge. When ultrasonic vibration is exerted, the stirred zone is divided into the inner and outer shear layers, the downward material flow trend of the inner shear layer disappears and tends to flow upward, and the onion-ring structure caused by the swirl motion is avoided in the pin-affected zone. By improving the flow behavior of plastic materials in the stirred zone, ultrasonic vibration reduces the heat generation, accelerates the heat dissipation in nugget zone and changes the thermal cycles, thus inhibiting the formation of intermetallic compound layers.
The magnesium (Mg) alloy low-pressure expendable pattern casting (EPC) process is a newly developed casting technique combining
the advantages of both EPC and low-pressure casting. In this article, metal filling and the effect of the flow quantity of
inert gas on the filling rate in the low-pressure EPC process are investigated. The results showed that the molten Mg alloy
filled the mold cavity with a convex front laminar flow and the metal-filling rate increased significantly with increasing
flow quantity when flow quantity was below a critical value. However, once the flow quantity exceeded a critical value, the
filling rate increased slightly. The influence of the flow quantity of inert gas on melt-filling rate reveals that the mold
fill is controlled by flow quantity for a lower filling rate, and, subsequently, controlled by the evaporation of polystyrene
and the evaporation products for higher metal velocity. Meanwhile, the experimental results showed that the melt-filling rate
significantly affected the flow profile, and the filling procedure for the Mg alloy in the low-pressure EPC process. A slower
melt-filling rate could lead to misrun defects, whereas a higher filling rate results in folds, blisters, and porosity. The
optimized filling rate with Mg alloy casting is 140 to 170 mm/s in low-pressure EPC. 相似文献
In this paper, the use of a kinematically admissible velocity field to predict the presence of a central cavity in the final
stage of axisymmetric forward extrusion is advanced, in accordance with the results of Moire experiments. On the basis of
the velocity field, the critical condition for central cavity formation is obtained by the upper bound approach. Furthermore,
the quantitative relationships between central cavity formation and process parameters (reduction in area, frictional factors
on the ram and chamber wall, relative residual thickness of the of the billet) are studied. The results show that (1) the
critical relative residual thickness of the billet used for the central cavity formation is affected primarily by the reduction
in area and the frictional factors on the ram, and slightly by the frictional factor on the chamber wall; (2) the relative
dimensions of the central cavity increase with a decrease in the relative residual thickness of the billet; (3) the growth
rate of the central cavity decreases with an increase in the frictional factors on the ram, but is affected by the frictional
factors on the chamber wall only slightly. Good correlation is found between the analytical and experimental results. 相似文献
Behavioral cues to deception are instrumental in detecting deception. As one of the primary sources of deception behavior, text has been analyzed at the level of sub-sentence or message but not the discourse of interaction. Additionally, empirical studies on cues to deception in the case of multiple receivers remain nonexistent. To fill these voids, we propose a discourse framework and six hypotheses about deception behaviors in a multi-receiver environment. The deception behaviors are operationalized by discourse features based on an analysis of real-world data. The results of statistical analysis validate the efficacy of discourse features in discriminating deceivers from truth-tellers. 相似文献
Partially observable Markov decision process (POMDP) is an ideal framework for sequential decision-making under uncertainty in stochastic domains. However, it is notoriously computationally intractable to solving POMDP in real-time system. In order to address this problem, this paper proposes a point-based online value iteration (PBOVI) algorithm which involves performing value backup at specific reachable belief points, rather than over the entire belief simplex, to speed up computation processes, exploits branch-and-bound pruning approach to prune the AND/OR tree of belief states online, and proposes a novel idea to reuse the belief states that have been searched to avoid repeated computation. The experiment and simulation results show that the proposed algorithm can simultaneously satisfy the requirement of low errors and high timeliness in real-time system. 相似文献