Memristive neuron model with an adapting synapse and its hardware experiments

Electromagnetic induction effect caused by neuron potential can be mimicked using memristor. This paper considers a fluxcontrolled memristor to imitate the electromagnetic induction effect of adapting feedback synapse and presents a memristive neuron model with the adapting synapse. The memristive neuron model is three-dimensional and non-autonomous. It has the time-varying equilibria with multiple stabilities, which results in the global coexistence of multiple firing patterns. Multiple numerical plots are executed to uncover diverse coexisting firing patterns in the memristive neuron model. Particularly, a nonlinear fitting scheme is raised and a fitting activation function circuit is employed to implement the memristive mono-neuron model. Diverse coexisting firing patterns are observed from the hardware experiment circuit and the measured results verify the numerical simulations well.     

Challenges and recent progress in thermal management with heat pipes for lithium-ion power batteries in electric vehicles

Electric vehicles(EVs) are globally undergoing rapid developments, and have great potentials to replace the traditional vehicles based on fossil fuels. Power-type lithium-ion batteries(LIBs) have been widely used for EVs, owing to high power densities,good charge/discharge stability, and long cycle life. The driving ranges and acceleration performances are gaining increasing concerns from customers, which depend highly on the power level of LIBs. With the increase in power outputs, rising heat generation significantly affects the battery performances, and in particular operation safety. Meanwhile, the cold-start performance is still an intractable problem under extreme conditions. These challenges put forward higher requirements for a dedicated battery thermal management system(BTMS). Compared to traditional BTMSs in EVs, the heat pipe-based BTMS has great application prospects owing to its compact structure, flexibility, low cost, and especially high thermal conductivity. Encompassing this topic, this review first introduces heat generation phenomena and temperature characteristics of LIBs. Multiple abuse conditions and thermal runaway issues are described afterward. Typical cooling and preheating methods for designing a BTMS are also discussed. More emphasis on this review is put on the use of various heat pipes for BTMSs to enhance the thermal performances of LIBs. For lack of wide application in actual EVs, more efforts should be made to extend the use of heat pipes for constructing an energy-efficient, cost-effective, and reliable BTMS to improve the performances and safety of EVs.     

Ultrahigh-performance planar β-Ga_2O_3 solar-blind Schottky photodiode detectors

The low dark current, high responsivity and high specific detectivity could be preferably achieved in detectors based on junctions, owing to the efficient constraint of carriers. Compared with the other junctions, planar Schottky junctions have simple structures and technological demands and are easy integrated. Herein, in this work, we prepared the β-Ga_2O_3 thin film by metalorganic chemical vapor deposition method to construct planar Ti/β-Ga_2O_3/Ni Schottky photodiode detectors with different onstate resistances. Fortunately, all the devices exhibit state-of-the-art performances, such as responsivity of 175–1372 A W~(-1),specific detectivity of 10~(14) Jones and external quantum efficiency of 85700%–671500%. In addition, the dependences of device performances on the on-state resistances indicate that the higher dark currents, photocurrents and photoresponsivities may well be obtained when on-state resistance is smaller, due to the less external power is used to overcome the impendence and condensance at the Ti/β-Ga_2O_3 and Ni/β-Ga_2O_3 interfaces, but contributing to higher electric current flow both in the dark and under illuminations.     

腐解稻草DOM提取液洗脱六价铬污染土壤试验研究

工矿企业产生的铬渣、含铬废水由于管理不善导致土壤铬污染严重,迫切需要寻求低成本铬污染土壤修复技术。提出腐解稻草中溶解性有机质（Dissolved Organic Matter, DOM）提取液洗脱铬污染土壤的技术,通过实验室模拟试验,以2种铬污染土壤（总铬含量为分别为121.54、941.90 mg/kg,六价铬含量分别为119.90、856.90 mg/kg）为研究目标,采用振荡淋洗法考察了固液比、淋洗时间、淋洗次数等因素对土壤中总铬、六价铬洗脱效果的影响,并探讨了淋洗前后铬形态变化及淋洗后土壤残留六价铬的持续钝化能力。研究结果表明：稻草经35 d腐解后的DOM提取液洗脱土壤中铬效果最佳,确定为最佳淋洗剂;固液比1：15、淋洗4h/次、淋洗2次为最佳淋洗工艺条件,该条件下,2种铬污染土壤总铬分别洗脱了47.79%、85.92%,六价铬含量分别削减了51.76%、95.09%;DOM提取液呈弱碱性,包含大量羧基、羟基及酚类物质,对水溶态、弱酸提取态和残渣态铬有较好的洗脱效果,有效降低了土壤环境风险,且能持续钝化淋洗后土壤中残余的六价铬。     

One-step fabrication superhydrophobic sand filter for capillary-driven separation of water-in-oil emulsions

The efficient separation of water-in-oil emulsion is of significance in environment and energy filed, and it has become a world-wide challenge. Herein, we have presented a one-step, facile and low-cost approach to prepare superhydrophobic sands for efficient separation of water-in-oil emulsion. The as-prepared sand layers possessed a water contact angle higher than 151°, demonstrating their superior superhydrophobic property. Besides, the as-prepared sand layers could separate water-in-emulsions with separation efficiency up to 99.7%, which is superior to both traditional and superwettable filtration membranes. The effect of thickness of sand layer on separation performance was also investigated. The results showed that the filtration flux decreased with the increased of filtration thickness while the separation efficiency increased. The as-prepared sand layer proposed by this study is a processing candidate for separating water-in-oil emulsion in practical industry. Additionally,the as-prepared superhydrophobic sand fabrication method also provides an alternative for desert water storage.     

Experimental research on steady-state operation characteristics of gas–solid flow in a 15.5 m dual circulating fluidized bed system

Gas-solid hydrodynamic steady-state operation is the operating basis in a chemical looping dual-reactor system. This study reported the experimental results on the steady-state operation characteristics of gas–solid flow in a 15.5 m high dual circulating fluidized bed(CFB) cold test system. The effects of superficial gas velocity, static bed material height and solid returning modes on the steady-state operation characteristics between the two CFBs were investigated. Results suggest that the solid distributions in the dual CFB test system was mainly determined by the superficial gas velocity and larger solid inventory may help to improve the solid distributions. Besides, cross-returning mode coupled with self-returning is good for steady-state running in the dual-reactor test system.     

Technology for recycling and regenerating graphite from spent lithium-ion batteries

With the annual increase in the amount of lithium-ion batteries (LIBs), the development of spent LIBs recycling technology has gradually attracted attention. Graphite is one of the most critical materials for LIBs, which is listed as a key energy source by many developed countries. However, it was neglected in spent LIBs recycling, leading to pollution of the environment and waste of resources. In this paper, the latest research progress for recycling of graphite from spent LIBs was summarized. Especially, the processes of pretreatment, graphite enrichment and purification, and materials regeneration for graphite recovery are introduced in details. Finally, the problems and opportunities of graphite recycling are raised.     

一起500 kV线路高抗保护跳闸故障分析

通过一起500 kV线路高抗跳闸故障,结合保护报文、录波波形及保护原理对保护跳闸行为进行分析,确定故障类型,并且判断保护动作行为正确,为变电站运行维护积累经验.     

Pathogenic Hydrogel? A Novel-Entrapment Neuropathy Model Induced by Ultrasound-Guided Perineural Injections

Entrapment neuropathy (EN) is a prevalent and debilitative condition caused by a complex pathogenesis that involves a chronic compression–edema–ischemia cascade and perineural adhesion that results in excessive shear stress during motion. Despite decades of research, an easily accessible and surgery-free animal model mimicking the mixed etiology is currently lacking, thus limiting our understanding of the disease and the development of effective therapies. In this proof-of-concept study, we used ultrasound-guided perineural injection of a methoxy poly(ethylene glycol)-b-Poly(lactide-co-glycoilide) carboxylic acid (mPEG-PLGA-BOX) hydrogel near the rat’s sciatic nerve to induce EN, as confirmed sonographically, electrophysiologically, and histologically. The nerve that was injected with hydrogel appeared unevenly contoured and swollen proximally with slowed nerve conduction velocities across the injected segments, thus showing the compressive features of EN. Histology showed perineural cellular infiltration, deposition of irregular collagen fibers, and a possible early demyelination process, thus indicating the existence of adhesions. The novel method provides a surgery-free and cost-effective way to establish a small-animal model of EN that has mixed compression and adhesion features, thus facilitating the additional elucidation of the pathophysiology of EN and the search for promising treatments.     

Recent Advances in the Detection of Antibiotic and Multi-Drug Resistant Salmonella: An Update

Antibiotic and multi-drug resistant (MDR) Salmonella poses a significant threat to public health due to its ability to colonize animals (cold and warm-blooded) and contaminate freshwater supplies. Monitoring antibiotic resistant Salmonella is traditionally costly, involving the application of phenotypic and genotypic tests over several days. However, with the introduction of cheaper semi-automated devices in the last decade, strain detection and identification times have significantly fallen. This, in turn, has led to efficiently regulated food production systems and further reductions in food safety hazards. This review highlights current and emerging technologies used in the detection of antibiotic resistant and MDR Salmonella.