Electrochemical Isolation and Determination of GCP Phase in a Fe-Cr-Ni Alloy

ＥｌｅｃｔｒｏｃｈｅｍｉｃａｌＩｓｏｌａｔｉｏｎａｎｄＤｅｔｅｒｍｉｎａｔｉｏｎｏｆＧＣＰＰｈａｓｅｉｎａＦｅ┐Ｃｒ┐ＮｉＡｌｏｙＭａＸｉａｎｇ，ＬｕＣｕｉｆｅｎ①ＡＢＳＴＲＡＣＴＧｅｏｍｅｔｒｉｃａｌＣｌｏｓｅＰａｃｋｅｄ（ＧＣＰ）ｐｈａｓｅｉｎＦ...     

Methodology for dependence-based integrated constitutive modelling: An illustrative application to SiCp/Al composites

In industrial forming and machining process, the large plastic deformation of material takes place in wide loading ranges of strain-rate and forming temperature. A satisfactory modelling of quasi-static and dynamic material behaviors is of great importance for understanding physical process and processes optimization. A dependence-based integrated methodology, together with an improved weighted multi-objective parameter identification strategy is presented for the development of phenomenological constitutive model and the parameter identification using experimental data from quasi-static and dynamic tests with instantaneous strain rate variations and plastic strain-related temperature changes. The improved multi-objective parameter identification model is reformulated by introducing three weighting factors for valuing different measure errors and fit standard errors in individual objective function corresponding to each test, considering the sampling point number and active material parameter number under different loading conditions, and balancing optimization opportunity of quasi-static and dynamic sub-objective functions. The methodology is verified for feasibility through illustrative constitutive identification for SiC_p/Al composites. This may provide a methodology of constitutive modelling for predicting material behaviors in quasi-static and dynamic modes equally well.     

Pulmonary toxicity and translocation of nanodiamonds in mice

Because of the possible health threat of nanodiamonds (NDs) to organisms, the pulmonary toxicity and translocation of NDs in different sizes in mice were investigated after intratracheal instillation administration. Biochemical assays, ultrastructural and histopathological evaluations of the lungs of the control and the ND exposed mice were carried out at 1, 7, 14 or 28 days post-exposure. Exposure to 1.0 mg/kg NDs with an average diameter of 4 nm produced a temporary lung index increase at 1 day post-exposure. NDs did not have evident adverse effects in the lungs within the studied period according to histopathological and ultrastructural investigations. Furthermore, no lipid peroxidation of the lung was observed. On the whole, intratracheally instilled NDs are of low pulmonary toxicity. In addition, the amount of NDs in alveolar decreased with time elapsed and the macrophages burdened with NDs were clearly observed in the bronchia from 1 day to 28 days post-exposure. Thus we affirm the critical role of alveolar macrophages in the main excretion pathway of NDs from the lungs, i.e. they engulf the NDs, migrate upward to the trachea by escalator/mucociliary system and finally enter the pharynx.     

分布式多传感器目标检测中的数据融合

多传感器目标检测，是近十多年来的一个研究热点。然而运用多传感器实施对目标的检测同时带来了一个新的问题，即如何能由多个传感器所提供的信息实时作了准确的判决？文章证明运用（Ｋ／Ｎ）规则于分布式多传感器目标检测时，存在最佳Ｋ值，使得系统的检测概率高于任一传感器的检测概率，虚警概率低于任一传感器的虚警概率。     

Nontoxic engineered virus nanofibers as an efficient agent for the prevention and detection of fungal infection

Nano Research - Candida albicans (C. albicans) infection has a high mortality rate in immunocompromised patients. Owing to the inefficiency of the current diagnostic system and the absence of...     

火车车轮S形辐板成形研究

借助商业有限元软件MSC/Superform,数值模拟了车轮压弯成形过程。研究了车轮S形辐板成形过程金属流动规律,得到了S形辐板截面变形分布,为S形辐板车轮成形工艺设计提供依据。     

微生物矿化动力学理论与模拟

微生物矿化技术作为一个新兴研究课题,近些年来得到了广泛关注,然而因其反应机制复杂,很难从时间和空间尺度对矿化反应过程进行定量表示。在微生物诱导碳酸盐沉淀原理的基础上,考虑细菌的吸附和筛滤效应,以及尿素水解动力学和沉淀动力学模型,对微生物矿化反应动力学理论进行了探究,并结合孔隙尺度下的微生物矿化反应试验,采用有限元软件进行多物理场耦合模拟。结果表明,细菌吸附和筛滤行为引起了细菌分布的差异性,而这种差异性进而影响了碳酸钙的沉积分布;溶液汇合初始段碳酸钙生成量横向分布不均匀,纵向分布呈增长趋势;经历40h的反应时间,渗透率可降低80%左右;当钙离子含量丰富时,碳酸钙沉淀速率受限于尿素水解速率;附着细菌量和沉淀速率的叠加效应表现为细菌被沉淀包裹的衰亡速率。本模型验证了微生物矿化沉积反应过程,丰富了微生物矿化反应理论,并有望为现场工程应用的效果预测提供参考。     

光伏用电致发光缺陷检测仪空间分辨率的量化评估

针对光伏用电致发光缺陷检测仪空间分辨率目视判定重复性、准确性差,并且难以量化等问题,提出一套基于卷积神经网络模型的空间分辨率量化评估方法。参照相关标准JJF(闽)1088-2018,采取不同的拍摄条件拍摄并切割出空间分辨率线对图像,对图像进行人工分类。设计卷积神经网络结构,采用卷积层、池化层和全连接层结构,并使用已分类完成的空间分辨率线对图像对模型进行训练。最终使用测试集对模型进行评估,结果表明,模型在测试集上的判别正确率达到99.2%。该方法满足使用要求,可取代目视判别,提高了光伏用电致发光缺陷检测仪空间分辨率判定的准确性与重复性,并为其量化提出了新的解决思路。由于太阳电池片用光致发光缺陷检测仪与光伏用电致发光缺陷检测仪的成像方式类似,该方法可兼容太阳电池片光致发光检测仪的性能评估。     

聚合物改性氯氧镁胶凝材料性能的研究

简述了普通氯氧镁胶凝材料水化硬化特性及存在的易吸潮返卤,泛霜,耐水性差的原因;通过聚合物改性显著地提高了材料的性能,为该材料的广泛应用与发展提供了重要的技术途径。