Characterization of wet microalgal cells pretreated with steam for lipid extraction

Steam pretreatment was employed to disrupt microalgal cells for lipids extraction.Effects of steam pre-treatment on microstructure of microalgal cells were investigated through scanning electron microscopy(SEM) and transmission electron microscopy (TEM).Effect of treatment on lipid extraction was also stud-ied.Microalgal cell walls were distorted after steam pretreatment due to the hydrolysis of organic macro-molecules contained in cell wall.Maximum curvature was increased from 1.88 × 10-6 m-1 to 1.43 × 10-7 m-1 after treatment with the steam at 130 ℃.The fractal dimension of microalgal cells increased from 1.25 to 1.30 after pretreatment for 15 min,and further increased to 1.47 when the pre-treatment time was increased to 60 min.Increased steam pretreatment temperature and time enhanced the hydrolysis of organic macromolecules,and finally destroyed microalgal cell walls at pretreatment temperature of 130 ℃ and pretreatment time of 60 min.Lipid extracted from wet microalgal was signif-icantly increased (2.1-fold) after pretreatment.     

The dynamic evolution of aggregated lithium dendrites in lithium metal batteries

Lithium (Li) metal anodes promise an ultrahigh theoretical energy density and low redox potential,thus being the critical energy material for next-generation batteries.Unfortunately,the formation of Li den-drites in Li metal anodes remarkably hinders the practical applications of Li metal anodes.Herein,the dynamic evolution of discrete Li dendrites and aggregated Li dendrites with increasing current densities is visualized by in-situ optical microscopy in conjunction with ex-situ scanning electron microscopy.As revealed by the phase field simulations,the formation of aggregated Li dendrites under high current den-sity is attributed to the locally concentrated electric field rather than the depletion of Li ions.More specif-ically,the locally concentrated electric field stems from the spatial inhomogeneity on the Li metal surface and will be further enhanced with increasing current densities.Adjusting the above two factors with the help of the constructed phase field model is able to regulate the electrodeposited morphology from aggregated Li dendrites to discrete Li dendrites,and ultimately columnar Li morphology.The methodol-ogy and mechanistic understanding established herein give a significant step toward the practical appli-cations of Li metal anodes.     

±800kV特高压换流变压器CAFS自动控制系统设计研究

固定式压缩空气泡沫灭火系统(CAFS)不仅具有灭火能力强、速度快、灭火效率高、安全可靠等特点,且经过试验验证,可用于扑救换流变压器等油类火灾.将其首次应用到国内某±800 kV换流站工程,阐述了压缩空气泡沫系统控制系统的结构、配置和功能,给出了站内设备布置和火灾报警系统接口等设计要点.对后续特高压工程压缩空气泡沫灭火控制系统设计具有借鉴作用.     

10 kV绝缘横担的轻量化设计及应用研究

为充分发挥绝缘横担轻质高强的特点,提高绝缘横担的使用寿命,满足腐蚀严重区域的使用需求,引进高强铝合金材料对10 kV绝缘横担进行轻量化设计及应用研究.从横担芯体、中间固定金具及配套附件三个方面对绝缘横担进行了轻量化的结构设计,采用有限元软件进行了详细的计算分析,为试制提供技术支撑.采用高强铝合金材料对方棒和T形绝缘横担的中间固定金具和配套抱箍进行了试制,并进行了抗弯、抗拉和抗扭测试,结果均满足要求.为了验证铝合金材料金具在绝缘横担中使用的稳定性,对方棒绝缘横担进行了热机循环试验,然后对两端金具进行抗拉试验,结果表现良好.经统计,高强铝合金材料在10 kV绝缘横担中的应用,大幅降低了整体质量(减轻近40％),可大大减少安装运输成本.     

大型复杂结构件抛丸改进方案

为解决某大型焊接结构件抛丸时工件上面大量堆积钢丸并可能导致安全事故的问题,从改变工件吊挂状态和在工件上增加漏丸工艺孔两方面入手,令工件可安全地在已有抛丸线上进行自动除锈.     

冲击荷载作用下热处理花岗岩动态力学特性研究

为研究冲击速度和热处理温度对黑云母花岗岩动态力学特性的影响,利用改进的霍普金森压杆系统对25~800 ℃共9个温度等级的热处理试样分别进行3种弹速下的冲击压缩试验。试验结果表明：随着冲击速度的增加,25~700 ℃热处理试样的应力—应变曲线由“Ⅱ型”转变为“Ⅰ型”,而800 ℃热处理试样均表现出“Ⅰ型”应力—应变曲线特征。同一温度热处理下试块的峰值应力、应变和平均应变均随动荷载的升高而增大。相同的冲击速度下,300 ℃热处理试样的动力学性能有所改善,500 ℃后试样的动力学性能开始逐渐劣化。同一温度热处理试样的破碎程度随冲击速度的增加而增加;相同冲击速度下,热处理试样的破碎程度随温度的升高先减弱后增强。     

高锰钢爆炸硬化

对高锰钢爆炸硬化工艺和硬化机理进行了综述,并对爆炸硬化的研究进展及需要开展的进一步工作作了简单介绍。     

550 MPa级中厚板矫直过程中表面凹坑缺陷的成因与对策

针对550 MPa级高强中厚板在矫直过程中极易出现氧化铁皮压入凹坑缺陷的问题，根据现场矫直工艺，研究了在不同温度下进行热变形时试样表面和横截面的形貌，钢基体与氧化铁皮界面处平直度的变化规律。结果表明，热变形温度为450 ℃时，表面氧化铁皮开始出现裂纹，且随着变形温度的降低，裂纹的数量逐渐增加；此外，氧化铁皮与钢基体之间的界面长度随变形温度的降低而呈直线增加，表明氧化铁皮与钢基体界面平直度随着热变形温度的降低越发粗糙、易脱落而形成凹坑缺陷。为此，应适当提高终轧温度以确保矫直时钢板表面温度大于450 ℃，同时提高钢板的运行速率，防止氧化铁皮在低温变形发生破碎和脱落的同时降低氧化铁皮厚度，从而减小因氧化铁皮脱落而造成凹坑缺陷的发生几率。     

SiCp／Al复合材料高应变率压缩变形及损伤机理

采用真空热压工艺制备了含SiC颗粒体积分数分别为5%,15%和25%的SiC颗粒增强铝基复合材料,利用Hopkinson高速压杆冲击实验系统对其从静态到动态(应变率为3.3×10-3s-1～5.2×103s-1)的压缩破坏响应进行了研究,结合其光学显微镜分析变形组织,分析了不同体积分数SiCp/Al复合材料高应变率压缩载荷下,材料的变形和微观损伤机理.结果表明,复合材料存在应变率敏感性,SiC含量的增加导致复合材料应变率敏感性的增加,以垂直于载荷方向的增强相颗粒的剪切开裂为主要破坏模式.