Wrapping effect of secondary phases on the grains: increased corrosion resistance of Mg–Al alloys

The discrete secondary phases usually cause severe galvanic corrosion, thereby resulting in rapid degradation for Mg–Al alloys in orthopaedics application. In this study, CaO was introduced into Mg–Al–Zn (AZ61) alloy via selective laser melting (SLM) to ameliorate the characterisations of the secondary phases, with an aim to improve its corrosion behaviour. Results revealed that CaO reacted with Mg and Al in Mg–Al alloys during SLM, suppressing the formation of coarse Mg₁₇Al₁₂ phase and promoting the formation of (Mg, Al)₂Ca phase. Meanwhile, the rapid solidification during SLM promoted the homogeneous precipitation of the second phase. As a result, inert (Mg, Al)₂Ca phase homogeneously wrapped the Mg grains, which effectively protected them from the invasion of corrosion solution. Thus, the degradation rate was remarkably reduced from 0.073 to 0.031?mg?cm^–2?h^–1. Furthermore, AZ61-9CaO exhibited good cytocompatibility. This work suggested that AZ61-9CaO was promising candidates for orthopaedics implants.     

Facile growth of homogeneous Ni(OH)<Subscript>2</Subscript> coating on carbon nanosheets for high-performance asymmetric supercapacitor applications

The growth of a Ni(OH)₂ coating on conductive carbon substrates is an efficient way to address issues related to their poor conductivity in electrochemical capacitor applications. However, the direct growth of nickel hydroxide coatings on a carbon substrate is challenging, because the surfaces of these systems are not compatible and a preoxidation treatment of the conductive carbon substrate is usually required. Herein, we present a facile preoxidation-free approach to fabricate a uniform Ni(OH)₂ coating on carbon nanosheets (CNs) by an ion-exchange reaction to achieve the in situ transformation of a MgO/C composite to a Ni(OH)₂/C one. The obtained Ni(OH)₂/CNs hybrids possess nanosheet morphology, a large surface area (278 m²/g), and homogeneous elemental distributions. When employed as supercapacitors in a three-electrode configuration, the Ni(OH)₂/CNs hybrid achieves a large capacitance of 2,218 F/g at a current density of 1.0 A/g. Moreover, asymmetric supercapacitors fabricated with the Ni(OH)₂/CNs hybrid exhibit superior supercapacitive performances, with a large capacity of 198 F/g, and high energy density of 56.7 Wh/kg at a power density of 4.0 kW/kg. They show excellent cycling stability with 93% capacity retention after 10,000 cycles, making the Ni(OH)₂/CNs hybrid a promising candidate for practical applications in supercapacitor devices.

Open image in new window

     

Numerical and experimental investigations in electromagnetic riveting with different rivet dies

In this work, the numerical simulations and electromagnetic riveting (EMR) experiments were conducted to investigate microstructure evolution and the forming mechanism of adiabatic shear bands (ASBs). And the effects of rivet dies on microstructure distributions in formed heads and mechanical properties of riveted structures were systematically explored. The impact velocity and deformation distribution results demonstrated that the proposed numerical method was accurate and reliable. The simulation results showed the slope angle of rivet dies notably affected the plastic flow of materials, and then determined the microstructure distribution in formed heads. The combined effects of inhomogeneous plastic flow and thermal softening were accounted for the forming of ASBs. The formed heads had two obvious ASBs (upper and lower ASB) for the 40° rivet die and flat rivet die. The formed heads only had the lower ASB and no clear upper for the 60° rivet die and 80° rivet die. The pull-out test results showed that the specific rivet die could improve the mechanical properties of the EMR joints, which contribute to the engineering applications of EMR riveted structures.     

Emergence of photoluminescence on bulk MoS<Subscript>2</Subscript> by laser thinning and gold particle decoration

We demonstrate a facile and effective approach to significantly improve the photoluminescence of bulk MoS₂ via laser thinning followed by gold particle decoration. Upon laser thinning of exfoliated bulk MoS₂, photoluminescence emerges from the laser-thinned region. After further treatment with an AuCl₃ solution, gold particles self-assemble on the laser-thinned region and thick edges, further increasing the fluorescence of bulk MoS₂ 28 times and the Raman response 3 times. Such fluorescence enhancement can be attributed to both surface plasmon resonance and p-type doping induced by gold particles. The combination of laser thinning and AuCl₃ treatment enables the functionalization of bulk MoS₂ for optoelectronic applications. It can also provide a viable strategy for mask-free and area-selective p-type doping on single MoS₂ flakes.

Open image in new window

     

In situ trapped high-density single metal atoms within graphene: Iron-containing hybrids as representatives for efficient oxygen reduction

Nano Research - Atomically dispersed catalysts have attracted attention in energy conversion applications because their efficiency and chemoselectivity for special catalysis are superior to those...     

Erratum to: High-purity helical carbon nanotubes by trace-waterassisted chemical vapor deposition: Large-scale synthesis and growth mechanism

Nano Research - The first author, Fanbin Meng, and the second author, Ying Wang, contributed equally to this work was unfortunately forgotten to write on the first pages of the main text and the...     

Large capacitance and fast polarization response of thin electrolyte dielectrics by spin coating for two-dimensional MoS2 devices

Nano Research - A spin-coating method was applied to obtain thinner and smoother PEO/LiClO4 polymer electrolyte films (EFs) with a lower level of crystallization than those obtained using a...     

Synthesis of ultrathin semicircle-shaped copper nanowires in ethanol solution for low haze flexible transparent conductors

Nano Research - Copper nanowires (CuNWs) are becoming an indispensable item for next-generation transparent optical devices due to their excellent conductivity and transparency. In this work,...     

Heterogeneous Fenton-like discoloration of methyl orange using Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/MWCNTs as catalyst: combination mechanism and affecting parameters

Multi-walled carbon nanotubes (MWCNTs) can act not only as a support for Fe₃O₄ nanoparticles (NPs) but also as a coworker with synergistic effect, accordingly improving the heterogeneous Fenton-like efficiency of Fe₃O₄ NPs. In this study, Fe₃O₄ NPs were in situ anchored onto MWCNTs by a moderate co-precipitation method and the as-prepared Fe₃O₄/MWCNTs nanocomposites were employed as the highly efficient Fenton-like catalysts. The analyses of XRD, FTIR, Raman, FESEM, TEM and HRTEM results indicated the formation of Fe₃O₄ crystals in Fe₃O₄/MWCNTs nanocomposites prepared at different conditions and the interaction between Fe₃O₄ NPs and MWCNTs. Over a wide pH range, the surface of modified MWCNTs possessed negative charges. Based on these results, the possible combination mechanism between Fe₃O₄ NPs and MWCNTs was discussed and proposed. Moreover, the effects of preparation and catalytic conditions on the Fenton-like catalytic efficiency were investigated in order to gain further insight into the heterogeneous Fenton-like reaction catalyzed by Fe₃O₄/MWCNTs nanocomposites.     

数字式横风传感器设计与实现

基于风洞实验提出了一种自动监测横风风速及风向的设计方案,研制出一种数字式横风传感器;通过建立数学模型,重点分析讨论了气流压差和空气密度对横风风速的影响,依据空气动力学相关理论推导出横风风速计算公式,给出了设计参数并进行了实验验证;简要介绍了传感器硬件电路结构和工作原理,以及下位机软件程序设计;差压传感器通过横风探头感应气流变化采集压差信号,温度传感器监测环境温度,通过查表法得到空气密度,微处理器MSP430结合气流压差和空气密度计算出风速;采用IIR数字滤波算法,有效抑制了压差信号的高频噪声干扰;通过异步通信方式对传感器进行零点标定,消除零点漂移。