Internet上化学化工资源

详细介绍了Internet上的化学化工资源及域名地址。     

块体非晶合金制备方法的研究进展

对大块非品合金的制备方法进行了总结和归纳,阐述了不同制备方法的基本原理,并对各种制备方法的优缺点进行了讨论.最后根据对不同制备方法的分析及探讨,对大块非晶合金制备方法的研究方向进行了展望.     

基于模糊神经网络的大场景人群密度估计方法 *

提出了一种估计大场景下密集人群密度的方法。该方法根据人类视觉的模糊性原理,认为用模糊集来划分人群密度范围比用确定的方法更符合人眼视知觉的认知方式,利用统计的方法确定灰度共生矩阵各指标对于各个密度类别的隶属函数;设计基于误差反向传播训练算法（BP）的模糊神经网络,计算样本模式对于各个密度类别的隶属度,并根据人群密度变化的时域连续性原理对人群密度范围进行合理估计。实验表明该方法提高了估计精度。     

含给电子Z-N催化剂催化乙烯/1-丁烯共聚的研究

研究了两种含有给电子体分别为对硝基苯胺、乙二醇二甲醚的Ziegler-Natta催化剂催化乙烯与1-丁烯高压的共聚反应性能,主要考察了反应条件对聚合活性、聚合物物理性质的影响,同时采用红外光谱法测定了聚合物的支化度.研究表明,给电子体为乙二醇二甲醚的催化剂催化活性高于对硝基苯胺.反应条件如反应压力、温度、铝钛比对聚合活性、丁烯的插入率以及聚合物性质都有明显影响.高的反应压力有利于1-丁烯插入和聚合物堆密度的提高;反应温度在50℃时的聚合活性最大,聚合物的支化度较高,聚合物熔点较低;铝钛比为500时聚合活性高于低铝钛比的聚合活性.     

A novel ADRC‑based design for a kind of fexible aerocraft

The paper presents a novel control design, which is based on the idea of active disturbance rejection control (ADRC), for a kind of fexible aerocraft whose controlled variable cannot be measured directly. Since the original frame of ADRC cannot be directly applied, the paper puts forward a new extended state observer (ESO) and the corresponding ADRC law. In order to assign the poles of the closed-loop system to ideal positions such that the vibration can be quickly suppressed, an elastic damping term is added into feedback law. The advantages of the new ESO for efectively estimating both the rigid mode and elastic mode from the measurements are discussed. Moreover, the analysis on the stability, the relative stability and the steady state of the closed-loop system is given. Finally, the efectiveness and robustness of the proposed ADRC are verifed by simulations.     

Simple Preparation of Crystal Co3（BTC）2·12H2O and Its Catalytic Activity in CO Oxidation Reaction

Crystalline metal-organic framework cobalt(Ⅱ) benzenetricarboxylate Co3(BTC)2?12H2O(MOF-Co) has been prepared using solvothermal method. The reaction of cobalt(Ⅱ) nitrate and 1,3,5-benzenetricarboxylic(BTC) acid in a mixed solution of N,N-dimethylformamide(DMF)/C2H5OH/H2O(1:1:1, ν/ν) at low temperature for short reaction times produced this crystalline compound. Compared with traditional hydrothermal method, a mixed solution method for the synthesis of crystalline metal complex was found to be highly efficient. After water molecules were removed from this metal complex, its exposed nodes served as active sites. When this MOF-Co was employed in the oxidation of CO, it showed good catalytic properties causing 100% conversion of CO to CO2 at low temperature of 160 ℃.     

Finite difference method for dynamic response analysis of anchorage system简

Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.     

Localized swelling of Fe-Cr-Ni alloy rollers in high-temperature applications

Localized swelling has been observed in 24Cr-24Ni-Nb steel transportation rollers used in the normalizing furnace of a plate mill after prolonged service at high temperature. Due to high localized thermal and mechanical stresses, the chromia layer formed on the roller surface ruptures, exposing the roller substrate to furnace oxygen. Oxidation of second-phase carbides results in the formation of carbon monoxide at very high partial pressure. This leads to formation of voids, leading in turn to localized swelling of the roller material.     

离心铸造大口径球铁管用复合功能型脱硫剂的研制

为使硫量波动的高炉铁液能适应大型离心铸造球铁铸管生产,研制了一种成本较低廉、添加操作简单的复合功能型脱硫剂。其主要组分包括强脱[S]去[O]材料钝化镁粒、碳化钙,增加石墨核心元素Zn和膨胀集渣材料珍珠岩,以及能抑制反球化作用和净化铁液的材料等。采用冲入法进行球化处理,这种脱硫剂覆盖在球化剂和孕育剂上,使用方法简单,效果良好。     

Influencing factors on elastic-plastic deformation of multi-layered surfaces under sliding contact

Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.