用计算机图形处理软件定量分析SEM图像

用图形处理软件PHOTOSHOP对SEM图像进行图像定量分析，对高温合金K23σ析出相的体积分数和M8钢样的夹杂物颗粒尺寸进行了定量测定。结果表明，该方法操作方便，有一定的可行性。     

工程设计演示文档动态性表述的探讨

在工程投标、方案论证、学术交流中 ,可利用多媒体演示软件制作各类文档。为了充分表达制作人员的思想 ,达到预期目的 ,可采用丰富多彩的动态性表现手法 ,使演示产生很好的效果 ,令听众和观众欣然接受。为此 ,对工程设计演示文档的动态性表述进行了探讨 ,以便能更充分地发挥多媒体演示软件的作用     

Effect of surface modification of metal hydride electrode on performance of MH/Ni batteries

A novel method was applied to the surface modification of the metal hydride(MH)electrode of MH/Ni batteries.Both sides of the electrode were plated with a thin silver film about 0.1μm thick using vacuum evaporation plating technology,and the effect of the electrode on the performance of MH/Ni batteries was examined.It is found that the surface modification can enhance the electrode conductivity and decrease the battery ohimic resistance.After surface modification,the discharge capacity at 5C(7.5A)is increased by 212 mA.h and the discharge voltage is increased by 0.11 V,the resistance of the batteries is also decreased by 32%.The batteries with modified electrode exhibit satisfactory durability.The remaining capacity of the modified batteries is 89%of the initial capacity even after 500 cycles.The inner pressure of the batteries during overcharging is lowered and the charging efficiency of the batteries is improved.     

混合室分配板成形工艺及模具设计

对混合室分配板零件介绍了一种落料拉伸成形和立体切沿分割的工艺思路以及模具结构和相关的理论计算 ,在实际应用中获得了好的效果。对同类形状产品 ,尤其是涉及到需要进行立体切沿分割的制件 ,可提供借鉴。     

ON THE HYDROGEN STORAGE BEHAVIOUR OF ALLOYS La_2Mg_(17) AND La_2Mg_(16)Ni

制备了La_2Mg_(17)和La_2Mg_(16)Ni合金,研究了其贮氢性能。给出了这两种合金的解吸等温线,并据此计算了相应的△H,△S值。解吸等温线的分析表明:La_2Mg_(16)Ni的解吸等温线有分别对应于Mg_2Ni-Mg_2NiH_4以及Mg-MgH_2的两个平台。通过X射线衍射物相分析和电子探针分析,总组成为La_2Mg_(16)Ni的合金实际上是La_2Mg_(17)型和Mg_2Ni型两相混合物。La_2Mg_(16)Ni的氢化产物是La的氢化物以及MgH_2和Mg_2NiH_4。对两种合金还作了常温低压吸氢及常压加热吸氢等应用试验。从研究结果看来,La_2Mg_(17)和La_2Mg_(16)Ni合金是性能较好的贮氢材料。     

基于Feeds的社交网络活跃度分析

从用户产生和消费Feeds的角度分析社交网络变得不活跃的原因,通过分析人人网某大学社区用户长周期的Feeds行为来探讨该社区用户活跃度的变化。通过对用户活跃性周期和Feeds时间间隔的分析,发现越来越多的用户产生Feeds的活跃度在下降,并导致其他用户接收到的信息流的流速和多样性下降。社交网络用户由于各种原因离开或变得不活跃,并通过信息流对其朋友圈形成负向反馈,这可能是社交网络变得不活跃的深层原因。模拟实验表明,30%的初始不活跃用户会使得整个社区的信息流快速下降,并导致整个社区不活跃。     

一种面向空地一体化组网的体系架构

空间网络是空地一体化组网中地面网络延伸的重要组成部分。针对空间网络为移动星座的场景,传统的空地一体化组网模型将空间网络视为独立自治域,利用边界网关协议将空间网络与地面自治域互联起来,最大化同地面网络保持兼容。然而,传统组网模型存在边界网关面临频繁会话中断或大量路由更新等问题。通过重新审视空间网络的角色定位和边界划定问题,提出一种面向空地一体化组网的体系架构Slink。Slink的核心思想是空间网络为地面网络提供互联通道,利用星地网关隔离空地两网间的路由更新。实验仿真表明,Slink体系架构能够有效减小对空间路由器的路由存储空间需求,降低星地网络间的带宽消耗。     

电动振动台试验能力的确认方法研究

研究电动振动台的特性,根据产品振动试验条件提出电动振动台能否满足试验条件的要求,找到电动振动台试验能力范围的确认方法。该文以DC-8000-80电动振动台为实例描述电动振动台能力范围的确认方法研究。     

资水梯级电站施工期闸孔通航方式工程实践

有通航要求的水利水电工程施工期通航问题,是施工导流设计和工程实施期间需要妥善解决的问题之一。以资水柘溪电站以下河段修建的修山水电站、东坪水电站和株溪口水电站工程为例,介绍了施工期利用工程既有的闸孔通航并取得较好技术经济效果的实际做法。工程实践表明,利用闸孔通航,技术上是可行的,并具有导流程序简单、施工期通航工程措施费用低、电站发电时间可提前等优点,经济效益显著。其工程经验可在类似工程中推广应用。     

Self-sensing active magnetic bearing using real-time duty cycle

In a self-sensing active magnetic bearing (AMB) system driven by pulse width modulation (PWM) switching power amplifiers, the rotor position information can be extracted from coil current and voltage signals by a specific signal demodulation process. In this study, to reduce the complexity of hardware, the coil voltage signal was not filtered but measured in the form of a duty cycle by the eCAP port of DSP (TMS320F28335). A mathematical model was established to provide the relationship between rotor position, current ripple, and duty cycle. Theoretical analysis of the amplitude-frequency characteristic of the coil current at the switching frequency was presented using Fourier series, Jacobi-Anger identity, and Bessel function. Experimental results showed that the time-varying duty cycle causes infinite side frequencies around the switching frequency. The side frequency interval depends on the varying frequency of the duty cycle. Rotor position can be calculated by measuring the duty cycle and demodulating the coil current ripple. With this self-sensing strategy, the rotor system supported by AMBs can steadily rotate at a speed of 3000 r/min.