Research on charge ordering and magnetic properties in La0.3Ca0.7Mn1-xWxO3 system

The perovskite manganite sample La0.3Ca0.7Mn1-xWxO3 （x = 0.08, 0.12） was prepared by the solid-state reaction method. The effect of W doping on the Mn site to La0.3Ca0.7MnO3 charge ordering phase and the changing process of magnetic properties were studied through the measurement of the M-T curve, M-H curves, and ESR curves of the sample. The results showed that when x = 0.08, the charge ordering （CO） phase exists in the system, the transition temperature Tco= 275 K, and the system exhibits PM when T 〉 275 K. The system transforms from spin-disordering paramagnetism to spin-ordering antiferromagnetism in the charge ordering state with the temperature decreasing from 275 K to 230 K. The long-range antiferromagnetism forms and AFM/CO states coexist between 230 K and 5 K. There is a little ferromagnetic component in the AFM/CO background in a low temperature range. When x = 0.12, the CO phase in the system has almost melted completely. There is a little remnant of the CO phase below 150 K. The system exhibits paramagnetism when T 〉 150 K and transforms from paramagnetism to ferromagnetism when T〈 150 K.     

Cr对低碳Si-Mn系TRIP钢组织与力学性能的影响

主要研究了Cr对低碳Si-Mn系TRIP钢组织与力学性能的影响。首先利用Formastor-F型膨胀仪测定了含Cr和不含Cr两种低碳钢的连续冷却转变(CCT)曲线,分析指出了Cr对连续退火工艺的潜在影响;然后采用Gleeble-3800热/力模拟试验机对两种钢的薄板试样进行了连续退火模拟实验,并通过拉伸试验测定了力学性能;最后采用金相、扫描电镜、X-射线衍射分析等技术考察分析了两种钢的显微组织。结果表明:含Cr的TRIP钢的组织比较细小,铁素体晶粒近似等轴分布;两种TRIP钢的残余奥氏体含量相近,但含Cr钢的残余奥氏体中的含碳量较高。分析认为这是由于含Cr钢在热轧阶段较易生成细小的组织,而在热处理阶段则抑制贝氏体的生成,最终获得稳定的残余奥氏体。     

Analysis of S-SEED''s characteristics in optical switch

This article introduces the basic structure of a symmetric self-electrooptic effect device （S-SEED）, and applies the Kirchoff＇ s current law and a purely equivalent capacitive model, to analyze S-SEED＇s switch characteristics. Linear approximation and N-segment approximation are utilized to obtain S-SEED＇s voltage-time （V-T） and characteristics. Theoretical analysis is verified by simulations, and the results demonstrate that the precision of S-SEED＇s switch time can satisfy the requirement in applications with linear approximation. Moreover, the simulations compare S-SEED＇s switch characteristics with different input powers and input contrast ratios, which reveal that increasing input contrast ratio is an effective way to improve S-SEED＇s switch characteristics.     

Tri-Gate Bulk MOSFET Design for CMOS Scaling to the End of the Roadmap

A tri-gate bulk MOSFET design utilizing a low-aspect-ratio channel is proposed to provide an evolutionary pathway for CMOS scaling to the end of the roadmap. 3-D device simulations indicate that this design offers the advantages of a multi-gate FET (reduced variability in performance and improved scalability) together with the advantages of a conventional planar MOSFET (low substrate cost and capability for dynamic threshold-voltage control).     

Al2O3对镁铬耐火材料致密化的影响

为了提高镁铬耐火材料的烧结性能,通过考察气孔率、体积密度和常温耐压强度与Al2O3加入量之间的关系,讨论了Al2O3添加剂对两种不同镁铬耐火材料致密化的影响.结果表明,镁铬耐火材料的骨料不同,Al2O3对其烧结性能和致密化的影响也不一样.     

涤纶复合丝（POY＋DTY）的研发

DTY和POY网络复合丝是以聚酯直纺生产的两种不同规格的POY丝为原料,通过对加弹机进行适当改造,利用不同的加工路线,使一股POY丝经过加捻后形成DTY,再与另一股POY丝网络合股形成包芯复合丝.该复合丝利用POY丝和DTY丝的收缩差异和染色差异等不同风格特性,使得布面形成一种具有雪花状的色丁效果.该复合丝属于差别化纤维,是国家鼓励发展的项目,它具有优良的吸湿排汗性能和弹性保暖性能,是保暖内衣的首选面料,市场前景广阔.     

SGM装车机油的研制和应用

中国石化上海高桥分公司炼油厂针对上海通用汽车有限公司(SGM)的别克轿车，先后进行了9986126SGM、9986125SGM装车机油的开发认证工作以及研制油在别克车上的适应性试验。配方研制遵照ACC规范、API基础油互换规则及粘度等级互换规则，各项性能满足技术指标规定的质量要求；同时30000km的高温高速行车试验结果表明，研制油具有较好的抑制氧化增稠能力、优良的高温抗氧化性能、清净分散性能和抗磨损性能，在上海通用别克轿车上取得了良好的使用效果。     

《天津市预防混凝土碱-集料反应技术规程》的修订说明

修订过程《天津市预防混凝土碱-集料反应技术规程》DB29-176-2007(以下简称本规程)是在《天津市预防混凝土碱-集料反应技术管理规定(试行)》JJG14-2000(以下简称原规定)的基础上,由天津市建筑科学研究院修订完成。     

关于从旋涡炉渣回收铜的研究

介绍了用自然澄清法降低、回收旋涡炉渣中的铜的方法。该方法工艺简单。操作方便，不仅降低冶炼成本，同时提高了经济效益。