A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

气藏水平井非稳态产能预测新方法研究

针对高产气藏储层特征,建立起气藏水平井非稳态产能预测模型,对高产气藏的产能进行分析和预测.实例分析表明,通过该模型形成的基于气藏与井筒耦合作用的非稳态产能预测新方法,对于单井产能预测具有优越性、长远性和实用性.该方法可直接利用不稳定压力测试成果进行预测,还可通过生产动态资料拟合来确定地层参数和预测,也可用来研究不同工作制度、完井方式,以及增产措施改善情况下的产能变化,为衰竭式开采的气藏工程研究提供了先进的手段.     

冷却排管的节能设计

从节能的观点出发，根据热力学原理和传递过程的理论，对冷却排管内湍流传热过程进行分析，研究损失随雷诺数的变化规律，探讨冷却排管的节能设计问题。     

影响聚合物段塞流变性因素的研究

本文针对我国表面活性剂/聚合物驱油的实际,研究了石油磺酸盐(PS)、正丁醇(R_4OH)和矿化水对水解聚丙烯酰胺(HPAM)溶液流变性的影响。结果表明,PS对HPAM溶液流变性的影响与介质的矿化度有关:非矿化水介质中,PS对HPAM溶液性质的影响类似于无机盐,能降低HPAM溶液的表现粘度(η_α)和稠度系数(k);当系统中含有一定浓度矿化水时,PS却能升高系统的η_α和k值,降低流型指数(n),使系统的非牛顿性增强。在含有PS和矿化水的HPAM系统中加入R_4OH,系统的η_α和k值会有所增加。     

预测控制算法的统一格式及其在电加热炉的应用

本文根据常用的两类预测控制算法推出一种新型预测控制算法。并将其应用于一双输入/双输出的力学持久机电加热炉的温度控制系统上,获得了满意的结果:控温精度为±1.5℃/300℃,且适用于非最小相位系统。     

Procedures for analysis of strain transfer in the acetabular region in vitro

The failure of acetabular cups via loosening, migration or fracture is partially related to the stress distribution existing in the acetabular region. The complexity of the investigation of these stresses demands the application of a variety of model testing techniques involving combined embedded strain gauging, finite element analysis, transmission and reflective photoelasticity and crack propagation studies. The application of these procedures are described and the difficulties of obtaining representative loadings and restraints are commented upon.     

浅析深层搅拌桩的材料使用

本文就深层搅拌桩施工材料使用存在的一些问题进行分析总结。     

Continuous and discontinuous fatigue crack growth of irradiated ultrahigh molecular mass polyethylene in saline solution at 37°C

To provide data for prosthesis design, the fatigue crack growth resistance of irradiated ultrahigh molecular mass polyethylene (UHMMPE) in saline solution at 37°C was determined from tests performed on compact tension specimens, comparable in size to the components in knee prostheses. The specimens were cyclically loaded by using a sinusoidal wave form at 1 Hz with a minimum-to-maximum load ratio of 0.1. Scanning electron microscopic fractography was used to examine the fracture surfaces. At higher stress levels, the Paris's Law was used to analyse the data, and a striation pattern with each striation corresponding to multi-cycles was observed. At lower stress levels, discontinuous fatigue crack growth was found, a phenomenon which dominated the fatigue life of the material and had not been reported previously in this material. A craze zone ahead of the crack tip was observed, which formed the discontinuous crack growth band with a length relevant to the Dugdale plastic zone length.     

基于广义最小均方的自适应递归滤波算法

本文提出了一种广义最小均方(GLMS)算法,分析了GLMS算法的性能,并根据GLMS算法,导出一种自适应递归滤波(ARF)算法。在推导中,ARF算法避开了超稳定定理,从而考虑自适应系统的严格正实条件和Popov不等式是不必要的。计算机模拟表明ARF算法具有很高的收敛速度。