3^n阶矩阵乘法的分块算法

针对３＾ｎ阶矩阵的乘法运行，给出了一种分块算法，其乘法运行量比常规的矩阵乘法计算方法和补零的基－２算法都有所减少。     

The effect of prior austenite grain size on the transformation behaviour of C-Mn-Ni weld metal

The influence of prior austenite grain size on the transformation behaviour and microstructural development of C-Mn-Ni weld metals was investigated. It was found that increasing the grain size depressed the start temperature of grain-boundary ferrite and slightly increased the acicular ferrite start temperature. The microstructural products also changed from a boundary-dominated effect in the small grain sizes, to an intragranular-dominated effect in the large grain sizes, and at the same time, the morphology of the acicular ferrite was seen to change to a larger aspect ratio.     

Experimental studies of new ductile coupling beams and multi-storey shear walls

The span-depth ratios of coupling beams to interconnect shear walls are generally small, so that brittle shear failure may occur and lead to reduced ductility. In order to improve the ductility of coupling beams for earthquake loading, a new type of ductile coupling beam is proposed in this paper. Along the middle depth of this beam, a slit through the entire thickness (a narrow hole) near each end and two lateral keyways along the remaining middle part of the span are made. The reductions of the stiffness under service load and the ultimate carrying capacity of the beam due to the weakening mentioned above are small and the ductility is greatly increased. Tests of 4-storey walls interconnected by coupling beams in three different constructions (monolithic beams, beams with a through-slit and new-type beams) indicated that shear walls with the new coupling beams possess the best aseismic behaviours under cyclic loading. The proposed new coupling beam has been used in a high-rise building.     

Keratin 17 gene expression during the murine hair cycle

Treatment of rats with phenytoin (DPH), an anti-epileptic drug, results in lower tissue thyroid hormone (TH) levels and interferes with the metabolic pathway of TH. To test the hypothesis that DPH affects the enterohepatic cycle of TH and, thus, the kinetics of TH turnover, we performed a kinetic experiment (three-compartment analysis) and a steady-state, double-isotope equilibrium experiment in rats treated for 3 weeks with DPH (50 mg/kg body weight per day) and in untreated controls. This included measurements of TH and TH metabolite levels, as well as the activities of enzymes involved in the TH metabolic pathway. DPH treatment resulted in a decrease in the production of thyroxine (T4) (by 25%) and tri-iodothyronine (T3) (by 37%), a decrease in the T3 concentration in all three pools, and a redistribution of T4 from the fast to the slow pool. The amount of T4 increased in intestinal contents and feces by 66% and 71% respectively. Expressed as a fraction of daily TH disposal, fecal loss of T4 was enhanced from 10 to 23% and that of T3 from 16 to 21%. An increase in T4 and T3 UDP-glucuronyltransferase activities was observed, suggesting that the increased fecal loss of T4 and T3 is secondary to an increased biliary output of their glucuronides. The reduced secretion of TH and increased fecal clearance during DPH treatment can lead in the long run to depletion of TH stores.     

Development of temperature compensated high elongation resistance strain gauges for use up to 250°C

The paper describes the development and evaluation of temperature compensated high elongation resistance strain gauges for use from room temperature to 250°C. These gauges could be temperature-compensated on steels with coefficient of thermal expansion α = 11 ppm/°C. Thermal output within 250°C was about 1 μm/m/°C and maximum standard deviation of 5 gauges was 34 μm/m. Strain limit was > 4% at room temperature and at 250°C. Gauge factors of different strain ranges at R.T. and at 250°C are tabulated. Some applications are stated.     

Experimental Study on Energy Consumption of Combined Conventional and Dehumidification Drying

Conventional drying, dehumidification drying, and combined conventional-dehumidification drying of wood were experimentally studied in this article. The results showed that the energy consumption in the dehumidification drying is the least but its drying time is the longest. The energy consumption in the combined drying is more than that in the dehumidification drying but less than that in the conventional drying, and the drying time is half of that in the dehumidification drying. The advantages of the combined conventional and dehumidification drying are discussed from the experiments results.     

浸胶工艺对Nomex蜂窝性能的影响

本文研究了浸胶工艺对Ｎｏｍｅｘ蜂窝性能的影响，分析探讨了提高Ｎｏｍｅｘ蜂窝性能及外观质量的途径。研究结果表明：采取新的浸胶工艺制作的Ｎｏｍｅｘ蜂窝，各项性能全面达到法国宇航材料标准。