基于DSP2812的新型飞机电源控制器的设计

电源控制器(PCU)在飞机供电系统(EPS)的控制保护中居于核心地位。设计的飞机电源控制器以高性能DSP芯片TMS320F2812为核心,采用通用的嵌入式硬件和软件设计方法,构建了一个高性能的控制系统平台。通过RS485总线接口实现与地面维护设备的通信,维护方便。通过ARINC429总线通信接口与交流一次配电控制装置通信,接收交流一次配电控制装置发送的命令并向其报告工作状态。根据该原理研制的试验样机现已进入试验验收阶段,试验结果表明,该控制器工作可靠,性能良好。     

基于单片机的智能刹车控制系统设计与实现

为了避免误把油门当刹车的操作,减少交通事故发生率,设计实现了基于单片机的智能刹车控制系统;系统以STC89C58RD+单片机为核心,首先对踏板的加速信号进行采集,经循环判定阈值方法处理后输出信号,一部分输入到STC13C4053AD产生PWM信号驱动直流电机,另一部分输入RT13864M和ISD35130,模拟感官效果,并给出了系统的硬件电路和软件设计流程;测试证明,该系统能够对误踩油门进行有效控制,这对减少和避免交通事故,保障行车安全具有非常重要的现实意义和应用价值。     

A COMPLEX-TYPE FOCUSSED MAGNETRON FOR SPUTTERING

ＡＣＯＭＰＬＥＸ－ＴＹＰＥＦＯＣＵＳＳＥＤＭＡＧＮＥＴＲＯＮＦＯＲＳＰＵＴＴＥＲＩＮＧ￥ＺｈｅｎｇＳｉｘｉａｏ（郑思孝）（ＩｎｓｔｉｔｕｔｅｏｆＮｕｃｌｅａｒＳｃｉｅｎｃｅａｎｄＴｅｃｈｎｏｌｏｇｙ,ＳｉｃｈｕａｎＵｎｉｖｅｒｓｉｔｙ,Ｃｈｅｎｇｄｕ...     

辐射换热的波长匹配问题

由于水的选择性吸收特性,辐射换热中水份波长匹配一直是一个有分歧的问题。文章通过理论与计算论证了这个问题,得出的结论否定了波长匹配的重要性。     

Critical Review of Fluorinated Electrolytes for High-Performance Lithium Metal Batteries

Lithium metal batteries (LMBs), due to their ultra-high energy density, are attracting tremendous attentions. However, their commercial application is severely impeded by poor safety and unsatisfactory cycling stability, which are induced by lithium dendrites, side reactions, and inferior anodic stability. Electrolytes, as the indispensable and necessary components in lithium metal batteries, play a crucial role in regulating the electrochemical performance of LMBs. Recently, the fluorinated electrolytes are widely investigated in high-performance LMBs. Thus, the design strategies of fluorinated electrolytes are thoroughly summarized, including fluorinated salts, fluorinated solvents, and fluorinated additives in LMBs, and insights of the fluorinated components in suppressing lithium dendrites, improving anodic stability and cycling stability. Finally, an outlook with several design strategies and challenges will be proposed for novel fluorinated electrolytes.     

Current measurement method based on magneto-optic rotation effect

Aiming at the approximate measurement of magnetic rotation angle in optical current sensor based on light intensity detection mode, this paper proposes a current measurement method based on triangular constant transformation to reconstruct magnetic rotation angle, so as to avoid the large current measurement error caused by the approximate measurement of the magnetic rotation angle. By extracting the direct current (DC) component and the alternating current (AC) component of the light intensity signal detected by the photoelectric detector (PD), the sine signal containing the magnetic rotation angle is directly obtained by dividing the two components, and then the triangular identity transformation method is used to linearly demodulate the magnetic rotation angle and reconstruct the current waveform. The experimental results show that the relative error of current measurement does not exceed 1.40% in the current range of 0.05—0.50 A, which is less than the approximate linear measurement (ALM) method, and the magnetic rotation angle and the current have a good linear relationship.     

SAdaBoundNc: an adaptive subgradient online learning algorithm with logarithmic regret bounds

Neural Computing and Applications - Adaptive (sub)gradient methods have received wide applications such as the training of deep networks. The square-root regret bounds are achieved in convex...     

Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

Graph-based fine-grained model selection for multi-source domain

Pattern Analysis and Applications - The prosperity of datasets and model architectures has led to the development of pretrained source models, which simplified the learning process in multi-domain...     

A quantized set-membership estimation-based heading control method of unmanned surface vessels under unknown-but-bounded wave-induced disturbances

This paper is concerned with the heading tracking control problem for a network-based unmanned surface vessel (USV) under wave-induced disturbances. Considering the characteristics of the wave-induced disturbances, the unknown-but-bounded (UBB) noise model is adopted. Meanwhile, signal quantization is taken into account due to the limited capacity of the communication channel. Based on these considerations, a novel set-membership based control scheme is proposed, which consists of a set-membership filter (SMF) and a set-membership controller (SMC). In the proposed control scheme, the SMF is designed for providing an ellipsoidal estimation set for the USV at each sampling step, and then the SMC uses the estimation set for producing control input for the USV in order to track the reference. Sufficient conditions are derived for the considered USV system to be asymptotically stable and satisfy the modified set-membership performance constraint. Simulation results verifies the effectiveness of the proposed control scheme.