An Analysis of Edge Detection by Using the Jensen-Shannon Divergence

This work constitutes a theoretical study of the edge-detection method by means of the Jensen-Shannon divergence, as proposed by the authors. The overall aim is to establish formally the suitability of the procedure of edge detection in digital images, as a step prior to segmentation. In specific, an analysis is made not only of the properties of the divergence used, but also of the method's sensitivity to the spatial variation, as well as the detection-error risk associated with the operating conditions due to the randomness of the spatial configuration of the pixels. Although the paper deals with the procedure based on the Jensen-Shannon divergence, some problems are also related to other methods based on local detection with a sliding window, and part of the study is focused to noisy and textured images.     

Device for characterization of thermal effusivity of liquids using photothermal beam deflection

We propose and study a novel optoelectronic device for thermal characterization of materials. It is based on monitoring the photothermal deflection of a laser beam within a slab of a thermo-optic material in thermal contact with the sample under study. An optical angle sensor is used to measure the laser deflection providing a simple and experimental arrangement. We demonstrate its principle and a simple procedure to measure thermal effusivity of liquids. The proposed device could be implemented into a compact sensor head for remote measurements using electrical and fiber optic links.     

Local Stability of an Endoreversible Heat Engine Working in an Ecological Regime

We present a local stability analysis of an endoreversible engine working in an ecological regime, for three common heat transfer laws. From our local stability analysis we conclude that the system is stable for every value of the heat conductivity g, the heat capacity C and the ratio of temperatures with T ₁ > T ₂. After a small perturbation the system decays exponentially to the steady state determined by two different relaxation times. We observe that the stability of the system improves as increases whereas the steady-state energetic properties of the engine decline. Moreover, we compare the stability properties of the engine working in the ecological regime and under maximum power output. Finally, qualitative phase-space portraits for the evolution of the system are presented for representative cases.     

Continuous,martensitic nature of the transition ß→γ Li3PO4

The transformation Li₃PO₄ shows characteristics of both continuous and martensitic transformations. Below 340° C, no detectable transformation occurs; between 340 and 410° C, the transformation goes only partially to completion; above 410° C the transformation rapidly goes to completion. At any temperature in the range 340 to 410° C, transformation proceeds rapidly in the initial stages to attain a certain degree of transformation. With prolonged isothermal heating or grinding of the samples, further transformation does not occur. The reverse transformation could not be effected under normal, dry conditions.     

Rab7 and actin cytoskeleton participate during mobilization of β1EHFNR in fibronectin-stimulated Entamoeba histolyticatrophozoites

In vitro interaction of Entamoeba histolytica trophozoites with fibronectin (FN) induces redistribution of the amoebic fibronectin receptor (β1EhFNR). Trafficking of beta1 integrins is important for cell adhesion and migration in higher eukaryotes and requires the participation of Rab proteins. In E. histolytica, the machinery involved in integrin trafficking is not completely known. EhRab7 is a 24.5-kDa protein whose alignment with other Rab7 proteins demonstrated that it shared significant homology with Rab7 proteins from other organisms, including humans. Using different types of microscopy (fluorescence and confocal microscopy), it was established that Rab7 and the actin cytoskeleton participated in the mobilization of β1EhFNR in FN-stimulated trophozoites. β1EhFNR and Rab7 co-localized only in vesicular structures at 5 min, and at longer time (1 h), both co-localized in both plasma membrane and in vesicular structures; at the same time, Rab7 co-localized with specific actin structures (phagocytic vacuoles). At 5 h the β1EhFNR, Rab7, and actin co-localized at the plasma membrane, and only β1EhFNR and Rab7 decorated vesicles of different sizes. Actin and Rab7 co-localized in a cap-like structure at one end of the cell. Fluorescence resonance energy transfer and electron microscopy confirmed the close interaction between β1EhFNR and Rab7. Moreover, the use of a lysosome-specific marker (LysoTracker) and a Golgi-specific marker (NBD C(6)-ceramide) allowed us to establish that, at some point within the endocytic route, β1EhFNR and Rab7 co-localized within a lysosome-type organelle, but not a Golgi-like organelle, which indicated that this integrin-like molecule was returned to the plasma membrane via exocytic or secretory vesicles.     

Robust quantification of the exposure to operational risk: Bringing economic sense to economic capital

Operational risk is commonly analyzed in terms of the distribution of aggregate yearly losses. Risk measures can then be computed as statistics of this distribution that focus on the region of extreme losses. Assuming independence among the operational risk events and between the likelihood that they occur and their magnitude, separate models are made for the frequency and for the severity of the losses. These are then combined to estimate the distribution of aggregate losses. While the detailed form of the frequency distribution does not significantly affect the risk analysis, the choice of model for the severity often has a significant impact on operational risk measures. For heavy-tailed distributions these measures are dominated by extreme losses, whose probability cannot be reliably extrapolated from the available data. With limited empirical evidence, it is difficult to distinguish among alternative models that produce very different values of the risk measures. Furthermore, the estimates obtained can be unstable and overly sensitive to the presence or absence of single extreme events. Setting a bound on the maximum amount that can be lost in a single event reduces the dependence on the distributional assumptions and improves the robustness and stability of the risk measures, while preserving their sensitivity to changes in the risk profile. This bound should be determined by expert assessment on the basis of economic arguments and validated by the regulator, so that it can be used as a control parameter in the risk analysis.     

Odometry-Based Viterbi Localization with Artificial Neural Networks and Laser Range Finders for Mobile Robots

This paper proposes an approach that solves the Robot Localization problem by using a conditional state-transition Hidden Markov Model (HMM). Through the use of Self Organized Maps (SOMs) a Tolerant Observation Model (TOM) is built, while odometer-dependent transition probabilities are used for building an Odometer-Dependent Motion Model (ODMM). By using the Viterbi Algorithm and establishing a trigger value when evaluating the state-transition updates, the presented approach can easily take care of Position Tracking (PT), Global Localization (GL) and Robot Kidnapping (RK) with an ease of implementation difficult to achieve in most of the state-of-the-art localization algorithms. Also, an optimization is presented to allow the algorithm to run in standard microprocessors in real time, without the need of huge probability gridmaps.     

A case study on business process recovery using an e‐government system

Business processes have become one of the key assets of organization, since these processes allow them to discover and control what occurs in their environments, with information systems automating most of an organization's processes. Unfortunately, and as a result of uncontrolled maintenance, information systems age over time until it is necessary to replace them with new and modernized systems. However, while systems are aging, meaningful business knowledge that is not present in any of the organization's other assets gradually becomes embedded in them. The preservation of this knowledge through the recovery of the underlying business processes is, therefore, a critical problem. This paper provides, as a solution to the aforementioned problem, a model‐driven procedure for recovering business processes from legacy information systems. The procedure proposes a set of models at different abstraction levels, along with the model transformations between them. The paper also provides a supporting tool, which facilitates its adoption. Moreover, a real‐life case study concerning an e‐government system applies the proposed recovery procedure to validate its effectiveness and efficiency. The case study was carried out by following a formal protocol to improve its rigor and replicability. Copyright © 2011 John Wiley & Sons, Ltd.     

Support and precursor effects on the preparation of new heterogenized Pt/Sn catalysts for the selective hydroformylation of 1-pentene

New heterogenized Pt/Sn catalysts selective for the hydroformylation of 1-pentene have been synthesized. The complex cis-[PtCl₂(PPh₃)₂] and the SnCl₂.2H₂O or SnC₂O₄ precursors have been anchored on silica-, magnesia- and alumina-carriers. X-ray photoelectron spectroscopy was used to determine the surface composition and the nature of the anchored species. The hydroformylation activity was found to depend on the type of support and tin precursor used. Only the silica supported catalysts were active in the hydroformylation reaction. Samples prepared from SnCl₂-2H₂O were 200-fold more active than those prepared from SnC₂O₄. Selectivity ton-hexanal of the silica-supported catalyst prepared from SnCl₂-2H₂O was as high as 94.4% at 39.2% conversion of 1-pentene.     

Evidence of the vital role of the pore network on various catalytic conversions of N2O over Fe-silicalite and Fe-SBA-15 with the same iron constitution

Fe-silicalite and Fe-SBA-15 with similar iron content have been characterized by N₂ adsorption, small angle X-ray scattering (SAXS), wide-angle X-ray scattering (WAXS), scanning electron microscopy (SEM), high-resolution transmission electron micrographs (HRTEM), UV–vis–DRS and EPR, and tested in direct N₂O decomposition, N₂O reduction by CO and N₂O-mediated propane oxidative dehydrogenation. Both catalysts contain almost exclusively isolated Fe³⁺ sites of similar concentration and structure, which are, however, stabilized in markedly different pore geometries (intersecting channels of ca. 0.55 nm diameter in Fe-silicalite versus parallel linear pores of ca. 7.5 nm diameter in Fe-SBA-15). This aspect is of vital importance in order to exclusively ascribe different catalytic performances to the environment where the iron species are stabilized. Fe-silicalite revealed to be much more active than Fe-SBA-15 in all reactions studied. This clearly illustrates that the confinement of the iron species in pores of suitable geometry (structure and size) is essential to originate their remarkable catalytic properties. The large pores in ordered mesoporous materials apparently do not generate the required intimate contact between potentially active Fe sites and reactant molecules.