Composition Dependence and Irradation Effects on Residual Resistivity in Cu-Al Alloys

Residual electrical resistivity due to short-range order has been calculated for Cu100-xAlx (x=9.13,13.56, 14.5 and 14.76 in at pct) alloys using pseudopotential approach, and the results have been discussed in the light of experimental studies of the local-order structure of these alloys. In case of Cu85.5Al14.5, change in the total residual electrical resistivity due to neutron-irradiation effects has been estimated by including contributions from the short-range order and static atomic displacement correction. Our results show a decrease in the residual resistivity in the irradiated Cu-Al solid solution as compared to the unirradiated sample. This is in accordance with the experimental results     

原料扩重的中压加氢改质装置投产

介绍燕山石化公司为扩大1Mt／a中压加氢改质装置的原料来源，改用大庆减二线油和重油催化裂化柴油组成的混合料开工投产的经验以及装置初期的运行条件。中压加氢改质技术可以生产优质柴油和蒸汽裂解制乙烯的原料，还可增产喷气燃料。     

Alkali-metal Na Adsorption and Promoted Oxidation on Si(100)2×1 Surface

The alkali-metal Na adsorption on Si(100)2×1 surface and its promoted oxidation and Si oxidegrowth have been investigated by means of thermal desorption,work function,Auger electronspectroscopy and photoemission electron spectroscopy.The experimental data showed that therewas a new state,interface electron state,near the Fermi level after the deposition of Na atoms.It wasfound that the presence of Na always caused an increase of the oxygen initial uptake whereas thepromotion of Si oxide growth was observed only at the coverage of Na greater than 0.5 ML.A newmechanism of Na-promoted Si oxide growth is suggested in this paper.     

SMS——智能网的业务管理系统

本文叙述了智能网的业务管理系统所实现的３种功能：业务管理功能，网络管理功能和业务管理访问功能，还介绍了业务管理和网络管理之间的关系，ＳＭＳ的集中式和分布式两种体系结构及业务管理功能的设计方法和进一步研究方向。     

一种3V CMOS音乐集成电路的设计原理

介绍了一种数字式全定制音乐集成电路设计原理。对伪音阶发生器、节拍发生器等子电路作了较详细的叙述。采用这种原理可设计出单芯片驱动压电陶瓷和发光二极管的音乐集成电路，该电路无须外接电阻、电容，可存储数首歌曲；另外，还可设计出一种数字音频程控频率合成器，时钟为ｆ０时，可控频率范围为ｆ０２～ｆ０２Ｎ。     

Be靶制备技术研究

介绍了Be靶制备的电阻加热法、滚轧法、静电振动法、离心沉淀法、聚集束溅射法等.结果显示:电阻加热和滚轧制备自支撑Be靶的厚度范围分别为20～970 μg/cm2和3.8～20 μm.     

激光结晶a-Si:H SOI离子注入和快速退火

本文对激光结晶a-Si∶H SOI结构砷注入和快速退火行为作了研究.a-Si∶H激光结晶有Lp-LCR,OD,FCR-2,FCR-1四个结晶区.用剖面电镜观察了结晶区的结构.扩展电阻测量表明Lp-LCR区中有两种扩散机制,即杂质在晶粒体内扩散和沿缺陷扩散.OD区中有三种扩散形式,除有上述两种以外,还有沿缺陷的扩散.首次比较了沿晶界和缺陷的扩散速度.     

调节剂对烷基水杨醛肟萃取铜铁的影响

烷基水杨醛肟虽然是一种高选择性的铜萃取剂，但单独使用时，萃取相易出现沉淀；反萃时，再生有机相出现乳化物，而且两相分离时间较长．将月桂醇、仲辛醇、壬基酚三种调节剂分别加入到萃取剂中，研究其对烷基水杨醛肟萃取及反萃行为的影响．结果表明，三种调节剂均可以解决上述问题，只是使萃取能力略有降低；壬基酚加入到烷基水杨醛肟中有助于提高铜铁分离系数，可达647．     

陶瓷材料冲击性能研究进展

陶瓷材料由于其多种优良特性得到了越来越广泛的应用。有关陶瓷材料的冲击力学性能研究是最近几十年才开始的。本文从陶瓷材料的应变率效应、冲击下的高压行为、冲击损伤、层裂现象和失效波响应，以及相关的理论研究和数值分析等方面，介绍了国内外对陶瓷材料冲击性能研究的现状，并对进一步的工作提出了建议和展望。