SELF-DIFFUSION IN IRON-50% COBALT ALLOY

用剩余强度法测定了Fe~(55)及Co~(60)在铁-钴(50％)合金中850--980℃α-区域内的自扩散系数,结果分别为 D_(Fe)=0.26 exp(—55,600/RT)厘米~2/秒, D_(Co)=14 exp(—65,000/RT)厘米~2/秒。 激活能测定数值与用准化学理论分析结果符合较好。     

钛合金精密铸造用陶瓷模壳研究

对适用于钛合金精密铸造用陶瓷模壳的制备工艺进行了系统的实验分析，表征了以过渡金属氧化物溶胶为粘结剂、稳定氧化锆为耐火材料的料浆的性能并讨论了相关参数的影响，对比研究了级配粉与均匀细粉制作的模壳的表面质量，结果表明，粗／细粉含量等级配参量和粉液比通过影响密度、粘度、滞流率以及涂层厚度等工艺参数而影响模壳的表面质量．在上述分析基础上确定了适用于本实验条件下钛合金精密铸造用陶瓷模壳的制备工艺参数。     

Improving the fatigue performance of longitudinal welded joints by low transformation temperature electrodes

0　IntroductionAfatigueisoneofthemainfailurescausesofweldedstructures.Manyexperimentshaveshownthatfatiguestrengthsofweldedjointsaremuchlowerthanthoseofbasemetal.Thefatiguecrackmainlyinitiatesatweldtoe ,becausetherearetensileresidualstressesandstressconcentrationinthisregion ,sothatthefatiguestrengthcanbeincreasedbybothmodifyingstressdistributionatweldtoeanddecreasingstressconcentration .Therearemanymethodstoimprovethefatiguestrengthsofweldedjoints[1,2 ] ,forexample ,TIGdress ing,hammerpeenin…     

数控型高真空电子束焊机的设计

介绍了数控型高真空电子束焊机的基本组成及工作原理，对电子束焊机的控制原理和作用进行了分析，提出用可编程逻辑控制器对电子束焊机进行整机逻辑控制，计算机对工作台实现CNC控制，根据焊机的技术要求，设计了PLC的控制软件和计算机的CNC软件、计算机和PLC之间的通信接口电路，并对焊机的工作过程及软件设计进行了详细地说明。设备运行表明：焊机的控制系统硬、软件功能完善、工作可靠、设计合理，满足生产工艺的需要。     

SLOW PROPAGATION OF FATIGUE CRACK NEAR THRESHOLD

The effect of pearlite interlamellar spacing(d)from 0.31 to 0.77 μm of T8 steel on fatiguecrack propagation near threshold has been investigated at different stress ratios(R).Theclosure stress intensity factor(K_(cl)),the threshold value(ΔK_(th))and crack tip opening dis-placement range(ΔCOD)were measured.The results show that pearlite interlamellar spac-ing in this range has no effect on K_(cl),but has effect on the threshold value in low stress ratio.The threshold value is higher for materials with larger interlamellar spacing.No matter whatthe stress ratio is,during the propagation near threshold,the propagation rate will be thesame,provieded the crack tip opening displacement range is the same.Metallurgical examinations were also carried out to show that the crack propagationpath is sensitive to mierostructure.The crack always propagates along either boundary ofpearlite colony or ferrite lamellar in pearlite.     

ZTA—SiCw的显微结构与断裂特征

用溶胶-凝胶方法制备室温强度为935—1110MPa、断裂韧性9.7MPam~(1/2)的ZTA-SiC_W复合陶瓷。经X射线衍射分析、透射电子显微镜、扫描电子显微镜等手段研究其显微结构和断口特征。结果表明,晶须得到了很好的分散,基体有显著的织构特征,晶须与基体之间除了一部分常见的多晶相接型关系,还有大量的穿晶及穿晶相接型关系。断口上有相当数量与局域晶须群密切相关的二次裂纹。局域晶须群对扩展裂纹的协同阻挡形成二次裂纹可能是晶须群增强增韧的一种新方式。     

HYDROGEN TRAPPING EFFECT OF SUBSTITUTIONAL ALLOYING ELEMENTS IN α-Fe

用电化学渗氢方法测定了氢在纯Fe和Fe-Cr,Mn,Co,Si,Mo的二元合金中的扩散系数。结果表明所研究的二元铁基合金中,随着合金元素浓度的增加,氢的扩散系数降低,氢的扩散激活能增加。根据Oriani模型计算了各种合金元素的氢陷阱参数,并获得了相应的氢与陷阱结合能。按陷阱结合能由小到大的顺序是:Si,Co,Ni,Mn,Cr和Mo。最后根据合金元素引起的晶格应变场与氢的弹性交互作用和合金元素与氢的电性交互作用对结合能的本质进行了分析。     

Effect of Mn and MnS on corrosion properties of domestic pipeline steels and welds

Base metals of domestic pipeline steels were used to study the effect of Mn on corrosion properties of SSCC( Sulfide Stress Corrosion Cracking), and welds were carried out to study the effect of MnS on corrosion properties of HIC ( Hydrogen Induced Cracking) both in solutions with wet hydrogen sulfide ( H2 S ). They were respectively conducted by referring to the standards of SSCC and HIC. Testing results revealed that with the increase of content Mn, the resistance of SSCC will be decreased, from the point of metallurgic view, and it is Mn element not C element to lead to the testing results of SSCC. Meanwhile, even under the condition without inclusions MnS, HIC in welds still occurred. That is to say, MnS is not necessary for HIC, the presence of local banded structures in which Mn and P are inclined to aggregate cause to the phenomena of HIC.     

多程序点焊控制器的研制

本文主要介绍了多程序点焊控制箱的程序过程以及主控制器及调制器的工作原理，并采用了一种新型的触发电路代替传统的脉冲变压器，具有触发可靠、大功率、高精度、电路简单等特点。