基于并行I/O口在高速实时数据通讯中的应用

较为详细地介绍了利用上下位机的并行I/O口进行高速实时通讯和传输数据的新方法.该方法基于快速响应中断通过上下位机的并行I/O口实现实时通讯和传输的,一次数据通讯时间为50μs左右,很好地解决了核聚变实验装置对快速控制的要求.同时该方法也对其它每次传送数据量不大但要求快速响应的实时控制系统的实现具有参考价值.     

The Experiment of Modulated Toroidal Current on HT-7 and HT-6M Tokamak

The Experiments of Modulated Toroidal Current were done on the HT-6M tokamak and HT-7 superconducting tokamak. The toroidal current was modulated by programming the Ohmic heating field. Modulation of the plasma current has been used successfully to suppress MHD activity in discharges near the density limit where large MHD m = 2 tearing modes were suppressed by sufficiently large plasma current oscillations. The improved Ohmic confinement phase was observed during modulating toroidal current (MTC) on the Hefei Tokamak-6M (HT-6M) and Hefei superconducting Tokamak-7 (HT-7). A toroidal frequency-modulated current, induced by a modulated loop voltage, was added on the plasma equilibrium current. The ratio of A.C. amplitude of plasma current to the main plasma current △Ip/Ip is about 12% ～ 30%. The different formats of the frequency-modulated toroidal current were compared.     

旁路式混合励磁电机初探

针对普通混合励磁电机价格昂贵、制作工艺复杂等问题,提出了一种新型的旁路式混合励磁电机。分析了该电机的结构和工作机理,运用三维有限元法对其工作机理进行了验证。样机有限元分析的结果说明该新结构电机制作技术不仅简单且具有较强的磁场控制能力。     

Study on Modeling and Control Strategy for Electric Drive Motor of Tracked Vehicles

Aimed at the requirements for electric transmission system of a military tracked vehicle, the motor’s design indexes were analysed and calculated. A model based on saturate inductance parameter of interior permanent magnet (IPM) synchronous motor was brought forward by using finite element analysis. And its control strategy based on the largest running capability was studied also. The experiment results for a scale model show that the modelling method improves the model’s accuracy, and the motor’s control strategy is effective.     

固态上转换材料制备及其性能

以聚二甲基硅氧烷(PDMS)为固态介质,将PDMS浸泡于光敏剂四苯基卟啉钯(Pd TPP)和发光剂9,10-二苯基蒽(DPA)的甲苯溶液中,干燥后得到上转换固态树脂(Pd TPP/DPA/PDMS)。利用紫外吸收光谱仪、稳态-瞬态荧光光谱仪和半导体激光器考察了液态(Pd TPP/DPA/甲苯)和固态(Pd TPP/DPA/PDMS)两种体系的上转换效率(Фuc)及在空气中的稳定性。结果表明,在相同条件下(半导体激光器发射波长532 nm,功率密度60 m W/cm2),固态上转换效率最高可达26.3%,固态树脂在空气中保持22%的上转换效率可持续在10 h以上,而液态二元体系在空气中保持22%的上转换效率只能持续2 min。     

Application of MDSplus on EAST Tokamak

EAST is a fully superconducting Tokamak in China used for controlled fusion research. MDSplus, a special software package for fusion research, has been used successfully as a central repository for analysed data and PCS （Plasma Control System） data since the debugging experiment in the spring of 2006 [1]. In this paper, the reasons for choosing MDSplus as the analysis database and the way to use it are presented in detail, along with the solution to the problem that part of the MDSplus library does not work in the multithread mode. The experiment showed that the data system based on MDSplus operated stably and it could provide a better performance especially for remote users.     

基于微观组织特征的航天铝铜合金力学行为研究

航天大型铝合金构件"一体化制造"随着商业航天迅速发展而得到日益广泛的应用,制造流程中铸造形成的微孔洞、偏析及晶粒尺寸等微观组织特征,对工艺及服役过程中材料力学行为的影响至关重要,是理解与预测构件复杂变形规律的基础。针对铝铜合金铸造-热处理的制造流程,定量表征了铸造微孔洞、成分、析出物等典型微观组织特征的分布规律,进一步建立了淬火析出相、微孔洞、成分偏析等对延伸率、屈服强度、流动应力等力学行为的影响模型。研究表明,微孔洞及合金偏析对淬火与时效后的力学性能有着不可忽略的影响。研究深化了制造过程铝合金力学性能形成的理解,是基于微观组织特征的本构模型的建立基础,并将为航天铝合金大型构件一体化制造提供理论支持与技术指导。     

打造物联网时代的3G数字智能家庭

我国正迎来一个无线城市、物联网建设与发展的热潮，在3G网络和物联网的推动下，智能家庭迎来了全新的变革。面向家庭客户的个性化综合信息服务，成为全业务运营时代移动业务创新的一个至关重要的方向。最近不少市民为了家居安全费尽心思，比如在家里显要位置挂自己当武警时的照片、借警察帽子放在私家车显眼位置、出远门的时候把马上回来的留言条贴在门上等。这些在让人感到忍俊不禁的同时，也让人深思，生活越变越好，但如何让家里更安全。     

单相电容运转实心钢转子力矩电动机的设计特点

由于单相力矩电机具有较软的机械特性曲线,因此它与三相力矩电机一样,可广泛应用在卷绕产品的各行业中,如电磁线、电缆、电容纸……等生产中。另外,单相力矩电动机使用时,只需要单相交流电源供电,如配以合适的电容箱,就能达到象三相力矩     

“家庭影院”未来的发展趋势——“媒体中心”

与普通DVD机器一样的外形,却可以录制电视节目,甚至还可以刻录成光盘,使用遥控器就可以轻松的利用它来上网,支持网络游戏,支持外接设备——这就是家庭影院的替代产品“媒体中心”。媒体中心外形还是家电化的DVD播放机,但是内在的功能更像一台电脑,可以说,这是一台家电化的PC,也许不久的未来将取代现在DVD播放机的应用领域,而打造这样媒体中心的核心,正是威盛电子的EPIA嵌入式主板和CPU。