Output power dispatch control for a wind farm in a small power system

Nowadays, a wind turbine generator (WTG) is required to provide control capabilities as the output power of WTG fluctuates. Under this scenario, this paper proposes an output power control method of a wind farm (WF) connected to a small power system using pitch angle control. In this control approach, the WF output power control is achieved by two control levels: central and local. In the central control, the WF output power command is determined by considering the frequency deviations and wind speeds using a fuzzy function. Then, the local output power commands for each of the WTGs are based on the proposed dispatch control. In the proposed dispatch control, the output commands of each WTG are determined by considering wind conditions for each of the WTGs. The simulation results by using an actual detailed model for the wind power system show the effectiveness of the proposed method. Copyright © 2010 John Wiley & Sons, Ltd.     

Evaluation of layout and atmospheric stability effects in wind farms using large‐eddy simulation

Large‐eddy simulation (LES) has been used previously to study the effect of either configuration or atmospheric stability on the power generated by large wind farms. This is the first study to consider both stability and wind farm configuration simultaneously and methodically with LES. Two prevailing wind directions, two layouts (turbines aligned versus staggered with respect to the wind) and three stabilities (neutral and moderately unstable and stable) were evaluated. Compared with neutral conditions, unstable conditions led to reduced wake losses in one configuration, to enhanced wake losses in two and to unchanged wake losses in one configuration. Conversely, stable conditions led to increased wake losses in one, decreased wake losses in two and unchanged wake losses in one configuration. Three competing effects, namely, rates of wake recovery due to vertical mixing, horizontal spread of wakes and localized regions of acceleration caused by multiple upstream wakes, were identified as being responsible for the observed trends in wake losses. The detailed flow features responsible for these non‐linear interactions could only be resolved by the LES. Existing analytical models ignore stability and non‐linear configuration effects, which therefore need to be incorporated. Copyright © 2017 John Wiley & Sons, Ltd.     

Securing light clients in blockchain with DLCP

In blockchain, full nodes (FNs) are peers that store and verify entire chains of transactions. In contrast, light clients (LCs) are those with limited resources, and for this reason, they request only block headers from FNs for transaction verification—using protocols like Simple Payment Verification (SPV). In an approach to prevent FN tampering on transaction verification (byzantine fault), LCs request block headers from multiple FNs and compare received responses. One problem with this approach is that an LC must connect to each FN and perform the same cryptographic operations with each one repeatedly, which leads to client‐side complexity and slower response. We propose an alternate approach to tackle this issue, in which LCs can encrypt a request for block headers only once, and send that request to a predetermined set of FNs to access, process, and reply back in a single response. Our approach, called Distributed Lightweight Client Protocol (DLCP), enables LCs to verify with little effort if FNs have agreed on a response. From an experimental evaluation, we observed that DLCP provided lower latency and reduced computing and communication overhead in comparison with the existing conventional approach.     

Characterization of surface-undoped In0.52Al0.48As/In0.53Ga0.47As/InP high electron mobilitytransistors

High-performance 0.3-μm-gate-length surface-undoped In_0.52 Al_0.48As/In_0.53Ga_0.47As/InP high-electron-mobility transistors (HEMTs) grown by molecular beam epitaxy (MBE) have been characterized and compared with a surface-doped structure. At 18 GHz, the surface-undoped HEMT has achieved a maximum stable gain (MSG) of 19.2 dB compared to 16.0 dB for the surface-doped structure. The higher MSG value of the surface-undoped HEMTs is obtained due to the improved g_m/g₀ ratio associated with the surface-induced electric field spreading effect. Comparison of identical 0.3-×150-μm-gate devices fabricated on surface-undoped and -doped structures has shown greatly improved gate leakage characteristics and much lower output conductance for the surface-undoped structure. It is demonstrated that the surface potential, modulated by different surface layer designs, affects the charge control in the conducting channel, especially the carrier injection into the buffer, resulting in excess output conductance. Several millimeter-wave coplanar waveguide (CPW) monolithic distributed amplifiers have been successfully fabricated by using the surface-undoped HEMT structure. A high gain per stage distributed amplifier with 170-dB±1-dB small-signal gain across a frequency band of 24-40 GHz, a W-band monolithic integrated circuit with 6.4-dB gain at 94 GHz, and a broad bandwidth distributed amplifier with 5-dB gain across a frequency band of 5 to 100 GHz have been demonstrated by using the surface-undoped structures     

Erbium-Ion-Doped Tellurite Glass Fibers and Waveguides—Devices and Future Prospective: Part II

Following on from Part I of this review article that focuses on the suitability of Er³⁺-doped tellurium oxide glass for optical amplification in fiber, this Part II article describes how the fiber gain data were then employed to engineer amplification in waveguides, which can be integrated with semiconductor pump sources. The gain characteristics and bandwidth of a phosphate modified tellurite waveguide formed on a GaAs substrate are discussed. The limiting structural compatibility of Er³⁺-doped tellurite glass with polydimethylsiloxane polymer for active–passive integration is overcome by adopting a nanoscale super-lattice approach for waveguide engineering.     

Anodic behavior of gold in 1-butyl-3-methylimidazolium methanesulfonate ionic liquid with chloride anion

The anodic behavior of gold has been investigated in presence of chloride and/or water in 1-butyl-3-methylimidazolium methanesulfonate (BMI CH₃SO₃) ionic liquid (IL). The cyclic voltammetry (CVs) in presence of chloride ions shows two waves attributed to the oxidation of the gold electrode which occurs under two steps: the first one is attributed to the electrochemical dissolution of gold into to gold(I), while the second one is attributed to an overlap of the chloride oxidation step as well as the oxidation of Au(I) to Au(III). Furthermore the determination of water and chloride content in IL allowed observing that the passive layer induced by water could be removed under chloride. Thanks to those results we were able to clarify the conditions of gold recovering in this kind of electrolyte.     

Long Non-Coding RNAs as Master Regulators in Cardiovascular Diseases

Cardiovascular disease is the leading cause of death in the United States, accounting for nearly one in every seven deaths. Over the last decade, various targeted therapeutics have been introduced, but there has been no corresponding improvement in patient survival. Since the mortality rate of cardiovascular disease has not been significantly decreased, efforts have been made to understand the link between heart disease and novel therapeutic targets such as non-coding RNAs. Among multiple non-coding RNAs, long non-coding RNA (lncRNA) has emerged as a novel therapeutic in cardiovascular medicine. LncRNAs are endogenous RNAs that contain over 200 nucleotides and regulate gene expression. Recent studies suggest critical roles of lncRNAs in modulating the initiation and progression of cardiovascular diseases. For example, aberrant lncRNA expression has been associated with the pathogenesis of ischemic heart failure. In this article, we present a synopsis of recent discoveries that link the roles and molecular interactions of lncRNAs to cardiovascular diseases. Moreover, we describe the prevalence of circulating lncRNAs and assess their potential utilities as biomarkers for diagnosis and prognosis of heart disease.     

Impedance spectroscopy of bismuth sodium titanate: Barium titanate ceramics with manganese doping

In this work we use Impedance Spectroscopy (IS) to study lead‐free ceramics of perovskite structure (Bi_1/2Na_1/2TiO₃)_0.925(BaTiO₃)_0.075 with Mn doping of 0, 0.2, 1.0, and 2.0 at.%. We compare our IS results with permittivity results, using dielectric to resistivity transformation equations which allow us to display results either as permittivity or as resistivity. We observe ionic conductivity dominating at lower temperatures, giving way to electronic conductivity at higher temperatures. The permittivity shows deviations from Curie‐Weiss behavior characteristic of relaxor ferroelectrics. The 0.2% Mn samples show the highest ionic resistivity, which will reduce heating for high voltage piezoelectric applications. They also have the highest Curie‐Weiss temperature and Burns temperature.     

Peroxidase-catalyzed oxidation of β-carotene in HL-60 cells and in model systems: Involvement of phenoxyl radicals

Recent studies provide extensive evidence for the importance of carotenoids in protecting against oxidative stress associated with a number of diseases. In particular, reactions of carotenoids with phenoxyl radicals generated by peroxidasecatalyzed one-electron metabolism of phenolic compounds may represent an important antioxidant function of carotenoids. To further our understanding of the antioxidant mechanisms of carotenoids, we used in the present work two different phenolic compounds, phenol and a polar homologue of vitamin E (2,2,5,7,8-pentamethyl-6-hydroxychromane, PMC), as representatives of two different types of phenols to study reactions of their respective phenoxyl radicals with carotenoids in cells and in model systems. We found that phenoxyl radicals of PMC did not oxidize β-carotene in either HL-60 cells or in model systems with horseradish peroxidase (HRP)/H₂O₂. In contrast, the phenoxyl radicals generated from phenol (by native myeloperoxidase in HL-60 cells or HRP/H₂O₂ in model systems) effectively oxidized β-carotene and other carotenoids (canthaxanthin, lutein, lycopene). One-electron reduction of the phenoxyl radical by ascorbate (assayed by electron spin resonance-detectable formation of semidehydroascorbyl radicals) prevented HRP/H₂O₂-induced oxidation of β-carotene. PMC, but not phenol, protected β-carotene against oxidation induced by a lipid-soluble azo-initiator of peroxyl radicals. No adducts of peroxidase/phenol/H₂O₂-induced β-carotene oxidation intermediates with phenol were detected by high-performance liquid chromatography-mass spectrometry analysis of the reaction mixture. Since carotenoids are essential constituents of the antioxidant defenses in cells and biological fluids, their depletion through the reaction with phenoxyl radicals formed from endogenous, nutritional and environmental phenolics, as well as phenolic drugs, may be an important factor in the development of oxidative stress.