Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

从印刷技术的发展看印刷业的重新定位

近20年以来的技术革命使印刷业发生了脱胎换骨的变化，曾经被认为是技术含量低、员工文化素质低、劳动密集型的印刷业已今非昔比。世界上最先进的电子技术、激光技术、计算机技术及网络技术在印刷领域广泛地应用与发展，改变了人们对印刷的传统思维和行为。在信息时代的今天。印刷业已经成为信息社会的先行行业。在新的形势下，印刷业的经营既离不开生产又离不开增值服务，全面解决方案的推行使印刷业的外延扩大到了第三产业。     

Research and application of automatic control system of argon blowing at ladle shroud

Argon blowing at the ladle shroud requires the best flow control strategy to effectively avoid the secondary oxidation of molten steel, slag entrapment and heat loss during the casting of the tundish, and at the same time, give full play to the role of bubbles to remove inclusions. Therefore, an automatic control system for argon blowing at the ladle shroud was proposed. The data collected by S7-300PLC and software programming were used to adjust the argon blowing flow online in real time according to factors such as pouring and continuous pouring. On this basis, PID control algorithm and closed loop control mechanism were used for real time adjustment. The flow control valve ensures theminimum deviation between the actual value of the flow and the set value. The production data of this system in the first quarter of 2021 in a special steel plant show that the proportion of furnaces with an acid soluble aluminum (Als) loss percentage of less than 10% of each steel grade has increased by 5.52%, and the proportion of furnaces with an Als loss percentage of more than 60% has increased from 1% decrease to 0. The actual application results show that the use of the system improves the surface quality of the continuous casting slab and the performance of the final product.     

Considerations for polarization insensitive optical switching and modulation using strained InGaAs/InAlAs quantum well structure

It is shown that In/sub 1-x/Ga/sub x/As/In/sub 0.52/Al/sub 0.48/As MQW structures with the wells under tensile strain obtained by the appropriate selection of the Ga mole fraction and well size can achieve polarization-insensitive optical switching and modulation for a wide range of wavelengths between 1.0 and 1.6 mu m. For example, a change in refractive index of -0.5% at about 1.55 mu m will facilitate an intersectional angle of more than 10 degrees in a total internal reflection switch which can be readily fabricated. Hence, this material system is promising for long-wavelength polarization-insensitive semiconductor optoelectronic devices.<>     

纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。     

采用活性非均匀分布催化剂中变反应器的模拟计算

模拟计算表明:采用活性趋于表层的分布,可以较明显地提高国产中温变换催化剂的内表面利用率,有效地节省催化剂用量,而对“热点”温度没有多大影响。     

同位素稀释质谱法测定高放废液中的铀

用双同位素稀释质谱法测定高放废液中的微量铀,采用TBP/Kel-F粉反相分配色层法分离铀,双稀释剂分别为浓缩~(235)U及~(238)U,铀同位素丰度比的质谱测定相对标准误差优于0.1%,化学处理及质谱测定全流程铀的空白值为3×10~(-9)g,方法检测限对于铀为1×10~(-9)g,高放废液中微量铀测定结果不确定度为±2%。     

Theoretical foundation of the 80/20 rule

A rigorous analysis of the 80/20 rule is made using an index for the observed values of the variables. Three important findings are identified. First, a sufficient condition is provided for Burrell's inverse relationship between minimum holdings and average circulation rate. Second, an indexed version of Lotka's law is used to derive a sufficient condition for Egghe's finding on the 80/20 rule. Third, through the computer simulations of the Simon-Yule model of Lotka's law, we identify the entry rate of new holdings as well as the number of circulations when the entry rate is a decreasing function to be crucial factors for the pattern of the 80/20-type curve.     

核电厂放射性监测系统仿真的数学物理模型

较详细地介绍了在北京核电厂模拟培训中心的模拟器上建立ＲＭＳ仿真系统的工作。首先对仿真的原型进行分析和简化，建立数学物理模型，并对包括ＲＣＳ、ＰＺＲ、ＳＧ、ＣＶＣＳ等的近２０个核电厂系统进行了动态仿真建模，确定ＲＭＳ各监测点放射性水平仿真读数的计算方法，最后，给出部分仿真实验结果，以验证数学物理模型的可靠性和适用性。     

消光剂TiO_2悬浮液配制工艺优化

讨论了在配制过程中减少凝聚粒子形成的有效措施。分散系统由分散器和弱搅拌组成 ,悬浮液初始浓度为 5 0 % ,分散时间应在 0 .5h以上。莫诺泵最佳转速在 85r min左右 ,球磨后TiO2 大粒子通过离心机分离出去 ,使产品中的大于 10 μm的凝聚粒子数小于 0 .4个 mg。