Fabrication of multi-walled carbon nanotube reinforced polyelectrolyte hollow nanofibers by electrospinning

Hybrid hollow multi-walled carbon nanotubes (MWCNTs)/polyelectrolytes (PE) nanofibers were prepared by a combination of the electrospinning method and layer-by-layer (LbL) technique. The mixed polystyrene (PS)/MWCNTs nanofibers were obtained by electrospinning method, which were employed as templates to self-assembly multilayered polyelectrolytes by LbL technique. Hollow MWCNTs/PE nanofibers were obtained by selectively removed part of the template: PS, which is confirmed by Raman spectra, transmission electron microscopy (TEM) and scanning electron microscopy (SEM).     

FeBP非晶态合金超细微粒的合成及其对PH3分解的催化作用

用化学还原法合成了FeBP非晶态合金超细微粒，用电感耦合等离子体光谱（ICP）、X射线粉末衍射（XRD）、透射电子显微镜（TEM）和差热分析（DSC）等手段对其进行了物性表征，并用微型催化反应装置考察了其对PH3分解的催化作用，结果表明，非晶态合金FeBP对PH3的分解具有良好的催化作用，能使PH3的分解温度从800℃以上降到500℃左右。490℃时分解率超过90％，540℃时达100％。     

Dynamic bandwidth allocation for multimedia traffic with rate guarantee and fair access in WCDMA systems

Packet scheduling in a WCDMA system poses a new challenge due to its nature of variable bit rates and location-dependent, time-varying channel conditions. In this work, three new downlink scheduling algorithms for a WCDMA base station are proposed to support multimedia transmissions. Using a credit management and a compensation mechanism, our algorithms provide rate guarantee and fair access to mobile terminals. In particular, we propose to allow a user to simultaneously use multiple OVSF codes in a time-sharing manner, which we call a multicode, shared model. Using multiple codes allows us to compensate those users suffering from bad communication quality or even errors. The proposed schemes can tolerate a multistate link condition (compared to the typically assumed two-state, or good-or-bad, link condition) by adjusting the number of OVSF codes and the spreading factor of each code. Simulation results show that the proposed schemes do achieve higher bandwidth utilization while keeping transmission delay low.     

基于网络环境的计算机资料室工作

随着信息技术的迅速发展,基于网络的信息资源共享已成为信息化社会的基本特征。数字化图书馆和电子期刊网的出现,正在改变着人们的阅读习惯,丰富的信息资源和跨时空的浏览方式彻底颠覆了传统的图书馆、资料室的服务模式。同时,数字化图书馆也给资料室管理模式创新带来了新的契机。分析了院系资料室面临的挑战与机遇,探讨了新形势下计算机资料室工作,提出了利用信息技术,改革服务方式,拓展服务内容,提高服务水平,提供有特色的专业服务。     

建筑电气设计中AutoCAD二次开发的研究

基于AutoCAD的二次开发环境下,建立幻灯片库,在AutoCAD本身所包含的程序帮助下,将已建好的幻灯片库嵌入到AutoCAD用户专用下拉菜单中.给设计者创造属于自己的开发环境,使AutoCAD在建筑电气设计中的使用更加灵活,极大的提高设计效率.     

卧式厚箔剪切机下刀摆动的消除方法

介绍了一种当前铝加工设备中常见的卧式厚箔剪切机.重点分析了其中剪切装置的工作原理,并就其缺陷提出改进方案.     

延长测井电缆使用寿命的方法探讨

由于对测井电缆机械性能缺乏了解,使用不规范,使测井电缆使用寿命降低.通过对测井电缆结构、制造工艺进行分析,进一步掌握其性能,提出通过正确安装、使用前需进行稳定化处理、在使用中注意控制起下速度、日常清洁润滑、定期对电缆进行维护保养等方法维持铠装层正常状态,减少层间摩擦力,不扭曲,缆芯通断良好等方法,从而延长电缆的使用寿命.     

无线局域网的安全解决方案

本文描述了无线局城网中的认证和密钥管理协议,CCMP认证加密协议。IEEE 802.11依赖于IEEE 802.1x 来支持认证和密钥管理服务,更进一步的,四次握手协议用来建立分组传输的数据加密密钥。IEEE 802.11i也定义了认证者更新一个组暂时密钥(GTK)给请求者的组密钥握手,这样请求者可以接收广播消息。     

引线框架材料QFe2.5加工工艺研究

本文介绍引线框架材料的发展现状，讨论引线框架用铜合金的强化机理，童点阐述引线框架用QFe2．5铜合金带材的性能及主要生产工艺（铸锭加热、热轧、时效退火等）。