竹坑水库大坝安全鉴定分析

在竹坑水库大坝安全鉴定中,认真分析了该工程存在的主要问题,并针对大坝的结构稳定和渗流稳定作了详细的分析论证.     

300脚MSA 10 Gbit/s Transponder模块

分析了开发10Gbit/sTransponder模块的必然性，介绍了10Gbit/sTransponder模块的原理、特点和参数指标。并且用开发出的两只40km300脚10Gbit/sTransponder模块成功地进行了43km的无误码传输试验和测试。     

河台金矿云西矿区富矿包地质特征及赋存规律

通过对矿体地质特征及富矿包地质特征的阐述, 分析归纳出富矿包赋存规律: 构造叠加部位和糜棱岩宽大膨胀部位等往往是富矿包赋存的有利部位。其表象特征为构造发育, 细粒他形硫化物富集。     

光纤的淬冷增强原理

本文从拉丝工艺技术的角度出发，讨论了高速、高温拉丝工艺方法对光纤的淬冷增强原理。     

内燃机车曲轴中频淬火过程的数值模拟

借助 ANSYS大型有限元分析软件 ,实现了 16 V2 4 0曲轴淬火过程的计算机模拟 ,模拟结果可直观地显示出任一时刻曲轴表面及内部的温度分布、冷却曲线以及淬火结束后的残余应力分布 ,并能预测淬硬层深度。同时对比了轴颈内圆角处进行淬火和不进行淬火两种工艺的效果 ,为现场提供了用虚拟现实方法详尽分析和研究淬火工艺的工具。     

机械合金化Zr-Al-Ni-Cu-Ag非晶合金的晶化行为

研究了机械合金化非晶态Zr65Al7.5Ni10Cu7.5Ag10合金的晶化过程，由于存在扩散不均匀区，机械合金化非晶合金在深过冷液相区的退火组织不同于快淬合金，在深过冷液相区退火，析出二十面体准晶相及一些知相：在靠近第一个放热峰的温度退火，近出Zr2Cu相：第二个放热峰对应残余非晶相及准晶相向Zr2Ni,Zr2-Al3的转变。     

含RDX的硝胺丁羟推进剂能量特性研究

采用最小自由能平衡流法对RDX/AP/Al/HTPB推进剂能量特性进行了理论计算。通过BSF165mm和BSF315mm发动机点火试验,研究了RDX含量、燃烧室压强对RDX/AP/Al/HTPB推进剂能量特性的影响规律。根据理论计算和发动机试验结果,对配方进行了优化设计,与某型号760mm全尺寸发动机的实测结果对比,其实测比冲高达2428.1N·s·kg-1(pc=6.86MPa),验证了RDX的加入对RDX/AP/Al/HTPB推进剂比冲有较突出贡献。     

强耦合表面磁极化子的基态能量和有效质量

采用Landau-Pekar变分理论研究强耦合表面磁极化子的性质。分别计算了强耦合表面磁极化子的基态能量和有效质量，并讨化了表面磁极化子的基态能量，振动频率和有效质量随磁场的变化关系。对KCL晶体进行了数值计算，结果表明，强耦合表面磁极化子的振动频率和有效质量随磁场的增加而增加，基态能量随磁场的增加而减少。     

Penicilloyl peptides are recognized as T cell antigenic determinants in penicillin allergy

Although hapten immune responses have been intensively studied in the mouse, very little is known about hapten determinants involved in human allergic reactions. Penicillins, as chemically reactive compounds of low molecular weight, constitute typical examples of hapten allergens for humans. Penicillins become immunogenic only after covalent binding to carrier proteins and in this form frequently induced IgE-mediated allergic reactions in patients subjected to antibiotic treatment. However, our previous data strongly indicated that penicillins also form part of the epitopes contacting the antigen receptors of beta lactam-specific T cells in allergic individuals. We have therefore investigated the molecular constraints involved in the T cell immune response to penicillin G (Pen G). Designer peptides containing a DRB1*0401-binding motif and covalently modified with Pen G via a lysine epsilon-amino group were found to induce proliferation of Pen G-specific T cell clones. A precise positioning of the hapten molecule on the peptide backbone was required for optimal T cell recognition. Furthermore, we extended these observations from our designer peptides to show that a peptide sequence derived from a natural DRB1*1101-binding peptide modified in vitro with Pen G, also acquired antigenic properties. Our data for the first time provide insight into the manner in which allergenic haptens are recognized by human T cells involved in allergic reactions to drugs and suggest possible mechanisms leading to the onset of these adverse immune responses.     

虚拟装配环境中的一种碰撞干涉检测方法

提出了在虚拟装配过程中零件与装配体碰撞干涉检测的一种方法。用投影轴算法检测出装配对象的碰撞,用坐标跟踪检测方法确定干涉余量值,并用连续包围盒对复杂和不规则的模型进行分割,通过这三种方法的配合使用,虚拟装配系统对干涉体进行了有效的、实时的、精确的检测。