Dietary intake of ochratoxin A from conventional and organic bread

Ochratoxin A (OTA) was extracted from 100 bread samples by using accelerated solvent extraction (ASE) and analyzed with liquid chromatography coupled with fluorescence detection. The presence of OTA was confirmed by methyl-ester derivatization. Bread samples were bought from different bakeries and supermarkets, 74 of non-organic and 26 of organic bread. The incidence of OTA varied between 20.3% and 23.0% for non-organic and organic bread, respectively. The highest values were obtained with non-organic versus organic products, five samples exceeded the European maximum permitted limit of OTA (3 ng/g) for this product. Estimated daily intake of OTA in this study was 1.6 ng/kg b.w./day. This value represents 32% and 10% of the tolerable daily intake (TDI) according to the Scientific Committee on Food of the European Commission and the FAO/WHO Committee of Experts on Food Additives, respectively. The daily intake estimated from this study reflects the necessity to take a vigilant attitude to guarantee food safety.     

Effects of replacing chopped alfalfa hay with alfalfa silage in a total mixed ration on production and rumen conditions of lactating dairy cows

The effects of replacing chopped alfalfa hay with alfalfa silage in a total mixed ration containing barley grain and corn silage on production and rumen conditions were investigated. Cows received three diets that all contained (dry matter basis) 38.5% barley grain-based energy supplement, 30.5% corn silage, 17.0% protein supplement, and 4.2% sunflower seeds. One diet contained (dry matter basis) 9.8% of chopped alfalfa hay and no alfalfa silage. One diet contained (dry matter basis) 4.9% chopped alfalfa hay and 4.9% alfalfa silage. One diet contained (dry matter basis) 9.8% of alfalfa silage and no chopped alfalfa hay. Contents of crude protein, neutral detergent fiber, acid detergent fiber, and starch, averaged across diets, were 16.7, 41.3, 21.1, and 24.4% DM, respectively, and did not differ significantly among diets. Replacing chopped alfalfa hay with alfalfa silage decreased the proportion of dietary DM passing through the 8-mm screen of the Penn State Particle Separator from 61.9 to 55.2% dry matter and significantly increased dietary physical effective NDF (peNDF) content, calculated as the NDF retained by the two screens of the Penn State Particle Separator, from 20.1 to 23.3% DM. Replacing chopped alfalfa hay with alfalfa silage also reduced dietary DM content, increased rumen pH from 6.27 to 6.47, reduced volatile fatty acid concentrations, numerically increased milk fat concentration and milk fat yield. Milk yield, milk protein concentration, dry matter intake, and rumen ammonia concentration were not affected.     

Polybrominated diphenyl ethers in the sediments of the Great Lakes. 3. Lakes Ontario and Erie

Sediment cores were taken in 2002 in Lakes Ontario and Erie at four locations. A total of 48 sediment samples were characterized, dated using 210Pb, and analyzed for 10 congeners of polybrominated diphenyl ethers (PBDEs) including BDE209 as well as 39 congeners of polychlorinated biphenyls (PCBs). The surficial concentrations of nine tri- through hepta-BDE congeners (sigma9PBDE) are 4.85 and 6.33 ng g(-1), at sampling sites ON40 and ON30 in Lake Ontario, and 1.83 and 1.95 ng g(-1) at ER37 and ER09 in Lake Erie, respectively, based on dry sediment weight. The surficial BDE209 concentrations are 242 and 211 ng g(-1) at ON40 and ON30 and 50 and 55 ng g(-1) at ER37 and ER09. The sigma(9-) PBDEs fluxes to the sediment around 2002 are 147 and 195 pg cm(-2) year(-1) at ON40 and ON30 and 136 and 314 pg cm(-2) year(-1) at ER37 and ER09, respectively. The fluxes of BDE209 are 6.5 and 7.3 ng cm(-2) year(-1) at ON30 and ON40 and 3.7 and 8.9 ng cm(-2) year(-1) at ER37 and ER09, respectively. Dramatic increases in PBDE concentrations and fluxes upward toward the sediment surface and the present time are evident at both locations in Lake Ontario, while PCBs concentrations peak in the middle of sediment cores around the dated time of 1970s and 1960s. For both locations of Lake Erie, the increasing trends of both PBDEs and PCBs from the bottom to the surficial segments were distorted by sediment mixing. BDE209 is the most abundant congener among PBDEs in the sediments, constituting about 96 and 91% of the total PBDEs on mass basis in Lakes Ontario and Erie, respectively.     

A Spectral Finite Element Approach to Modeling Soft Solids Excited with High-Frequency Harmonic Loads

An approach for efficient and accurate finite element analysis of harmonically excited soft solids using high-order spectral finite elements is presented and evaluated. The Helmholtz-type equations used to model such systems suffer from additional numerical error known as pollution when excitation frequency becomes high relative to stiffness (i.e. high wave number), which is the case, for example, for soft tissues subject to ultrasound excitations. The use of high-order polynomial elements allows for a reduction in this pollution error, but requires additional consideration to counteract Runge's phenomenon and/or poor linear system conditioning, which has led to the use of spectral element approaches. This work examines in detail the computational benefits and practical applicability of high-order spectral elements for such problems. The spectral elements examined are tensor product elements (i.e. quad or brick elements) of high-order Lagrangian polynomials with non-uniformly distributed Gauss-Lobatto-Legendre nodal points. A shear plane wave example is presented to show the dependence of the accuracy and computational expense of high-order elements on wave number. Then, a convergence study for a viscoelastic acoustic-structure interaction finite element model of an actual ultrasound driven vibroacoustic experiment is shown. The number of degrees of freedom required for a given accuracy level was found to consistently decrease with increasing element order. However, the computationally optimal element order was found to strongly depend on the wave number.     

Treatment of parking lot stormwater using a StormTreat system

The effectiveness of a StormTreat system in treating stormwater from a commercial parking lot in Connecticut was evaluated. Flow-weighted composite samples were collected from StormTreat inflow and outflow during a 2-yr study. Bypass flow was not monitored. The StormTreat significantly (P < 0.05) reduced total suspended solids, total phosphorus, total Kjeldahl-N, total zinc, total copper, and fecal coliform bacteria on a concentration basis. The StormTreat system retained 49% total suspended solids, 74% total phosphorus, 44% total Kjeldahl-N, 45% total zinc, 29% total copper, 2% total lead on a mass basis, and 99% fecal coliform on a concentration basis. Treatment efficiency was not associated with storm size, chamber stage, discharge rate, or hydraulic retention time (r < 0.355). The system retained ammonia-N more efficiently during the summer than during the winter (P < 0.01) and retained total zinc less efficiently during the summer than during the winter (P < 0.05). Season did not significantly (P > 0.05) affect the treatment of other monitored water quality variables. The StormTreat system reduced the concentrations of stormwater pollutants commonly found in parking lot runoff.     

Dehalogenation of chlorinated ethenes and immobilization of nickel in anaerobic sediment columns under sulfidogenic conditions

A sediment column study was carried out to demonstrate the bioremediation of chloroethene- and nickel-contaminated sediment in a single anaerobic step under sulfate-reducing conditions. Four columns (one untreated control column and three experimental columns) with sediment from a chloroethene- and nickel-contaminated site were investigated for 1 year applying different treatments. By stimulating the activity of sulfate-reducing bacteria by the addition of sulfate as supplementary electron acceptor, complex anaerobic communities were maintained with lactate as electron donor (with or without methanol), which achieved complete dehalogenation of tetra- and trichloroethenes (PCE and TCE) to ethene and ethane. A few weeks after sulfate addition, production of sulfide increased, indicating an increasing activity of sulfate-reducing bacteria. The nickel concentration in the effluent of one nickel-spiked column was greatly reduced, likely due to the enhanced sulfide production, causing precipitation of nickel sulfide. At the end of the study, 94% of the initial amount of nickel added to that column was recovered in the sediment As compared to the untreated (nonspiked) control column, all chloroethene-spiked columns ladditions of PCE and TCE) showed a permanent release of small chloride ion quantities (approximately 0.5-0.7 mM chloride), which were detected in the effluents a few weeks after sulfide production was observed for the first time. The formation of ethene and ethane as final products after dechlorination of PCE and TCE was detected in some effluents and in some gas phases of the columns. Other metabolites or intermediates (such as DCE isomers) were only detected sporadically in negligible quantities. The results of this study demonstrated thatmicrobial activity stimulated under sulfate-reducing conditions can have a beneficial effect on both the precipitation of heavy metals and the complete dechlorination of organochlorines. The strongly negative redox potential created by the activity of sulfate-reducing bacteria may be one factor responsible for stimulating the activity of the dehalogenating bacteria in the test columns.     

Dissolved gases as partitioning tracers for determination of hydrogeological parameters

In this study, dissolved Kr and SF6 gases were used to determine various hydrogeological parameters of laboratory columns under water-saturated and partially saturated conditions as a function of the flow velocity. The dissolved gases behaved conservatively in saturated columns but were significantly retarded in unsaturated conditions as a direct function of the Henry's law constant (KH) and the ratio of column pore spaces filled with air and water (Vg/Vw). Lower aqueous diffusion coefficients for SF6 compared to that for Kr also resulted in significant rate-limited mass transport across gas-water interface. This effect was exacerbated at higher flow velocities as was indicated by the asymmetric shape of breakthrough curves, more so in the case of SF6. A nonequilibrium advective-dispersive transport model accurately described tracer breakthrough and was used to estimate parameters such as final Vg/Vw under partially saturated conditions and partitioning rates. Internally consistent model results were obtained for both dissolved gases despite the wide range in physical properties (e.g., KH and aqueous diffusion coefficients), suggesting that dissolved Kr and SF6 may be used in conjunction to delineate and validate aquifer characteristics simultaneously from a single pulse injection of the tracer.     

Simulation of the mobility of metal-EDTA complexes in groundwater: the influence of contaminant metals

Reactive transport simulations were conducted to model chemical reactions between metal-EDTA (ethylenediaminetetraacetic acid) complexes during transport in a mildly acidic quartz-sand aquifer. Simulations were compared with the results of small-scale tracer tests wherein nickel-, zinc-, and calcium-EDTA complexes and free EDTA were injected into three distinct chemical zones of a plume of sewage-contaminated groundwater. One zone had a large mass of adsorbed, sewage-derived zinc; one zone had a large mass of adsorbed manganese resulting from mildly reducing conditions created by the sewage plume; and one zone had significantly less adsorbed manganese and negligible zinc background. The chemical model assumed that the dissolution of iron(III) from metal-hydroxypolymer coatings on the aquifer sediments by the metal-EDTA complexes was kinetically restricted. All other reactions, including metal-EDTA complexation, zinc and manganese adsorption, and aluminum hydroxide dissolution were assumed to reach equilibrium on the time scale of transport; equilibrium constants were either taken from the literature or determined independently in the laboratory. A single iron(III) dissolution rate constant was used to fit the breakthrough curves observed in the zone with negligible zinc background. Simulation results agreed well with the experimental data in all three zones, which included temporal moments derived from breakthrough curves at different distances downgradient from the injections and spatial moments calculated from synoptic samplings conducted at different times. Results show that the tracer cloud was near equilibrium with respect to Fe in the sediment after 11 m of transport in the Zn-contaminated region but remained far from equilibrium in the other two zones. Sensitivity studies showed that the relative rate of iron(III) dissolution by the different metal-EDTA complexes was less important than the fact that these reactions are rate controlled. Results suggest that the published solubility for ferrihydrite reasonably approximates the Fe solubility of the hydroxypolymer coatings on the sediments. Aluminum may be somewhat more soluble than represented by the equilibrium constant for gibbsite, and its dissolution may be rate controlled when reacting with Ca-EDTA complexes.     

Inhibition of bacterial foodborne pathogens by the lactoperoxidase system in combination with monolaurin

The lactoperoxidase system (LPS) and monolaurin (ML) are potential natural antimicrobial agents for use in foods. The LPS is considered to have greatest activity against Gram-negative bacteria while ML is usually considered to have greatest activity against Gram-positive bacteria. An LPS-ML combination system (utilizing lactoperoxidase (LPX) in the range 5-200 mg kg(-1) and ML in the range 50-1,000 ppm) inhibited growth of Escherichia coli O157:H7 and Staphylococcus aureus. Growth of S. aureus was inhibited more strongly in broth than in milk, in milk than in ground beef A similar pattern was observed for E. coli O157:H7, though enhanced inhibition by LPS-ML systems over that obtained in comparable LPS only systems was not observed in ground beef The inhibitory action of the LPS in combination with other lipids was also examined, with progressively weaker inhibition observed in combinations including palmitoleic acid, monopalmitolein, lauric acid, caprylic acid, and sodium lauryl sulphate.     

Spatiotemporal EEG/MEG source analysis based on a parametric noise covariance model

A method is described to incorporate the spatiotemporal noise covariance matrix into a spatiotemporal source analysis. The essential feature is that the estimation problem is split into two parts. First, a model is fitted to the observed noise covariance matrix. This model is a Kronecker product of a spatial and a temporal matrix. The spatial matrix models the spatial covariances by a function dependent on sensor distance. The temporal matrix models the temporal covariances as lag dependent. In the second part, sources are estimated given this noise model, which can be done very efficiently due to the Kronecker formulation. An application to real electroencephalogram (EEG) data shows that the noise model fits the data very well. Simulation results show that the resulting source estimates are more precise than those obtained from a standard analysis neglecting the noise covariance. In addition, the estimated standard errors of the source parameter estimates are far more precise than those obtained from a standard analysis. Finally, the source parameter standard errors are used to investigate the effects of temporal sampling. It is shown that increasing the sampling by a factor x, decreases the standard errors of all source parameters with the square root of x.