Prolonged tamoxifen exposure selects a breast cancer cell clone that is stable in vitro and in vivo

The effects of long-term tamoxifen exposure on cell growth and cell cycle kinetics were compared between oestrogen receptor (ER)-positive (MCF-7) and ER-negative (MDA-MB-231) cell lines. In the MCF-7 cell line, prolonged tamoxifen exposure (0.5 mumol/l for > 100 days) blocked cells in G0-G1 of the cell cycle, and slowed the doubling time of cells from 30 to 59 h. These effects corresponded to an increase in the cellular accumulation of tamoxifen over time [mean area under concentration curve (AUC) = 77.92 mumoles/10(6)/cells/day]. In contrast, in the MDA-MB-231 cell line, long-term tamoxifen exposure had no obvious effect on the doubling time, and reduced cellular tamoxifen accumulation (mean AUC = 50.50 mumoles/10(6)/cells/day) compared to the MCF-7 cells. Flow cytometric analysis of MDA-MB-231 cells demonstrated that a new tetraploid clone emerged following 56 days of tamoxifen exposure. Inoculation of the MDA-MB-231 tetraploid clone and MDA-MB-231 wildtype cells into the opposite flanks of athymic nude mice resulted in the rapid growth of tetraploid tumours. The tetraploid tumours maintained their ploidy following tamoxifen treatment for nine consecutive serial transplantations. Histological examination of the fifth transplant generation xenografts revealed that the tetraploid tumour had a 25-30 times greater mass, area of haemorrhage and necrosis, a slightly higher mitotic index and was more anaplastic than the control neoplasm. The control wildtype MDA-MB-231 tumours maintained a stable ploidy following tamoxifen treatment until the eighth and ninth transplantation, when a tetraploid population appeared, suggesting that tamoxifen treatment may select for this clone in vivo. These studies suggest that prolonged tamoxifen exposure may select for new, stable, fast growing cell clones in vitro as well as in vivo.     

Photoluminescence and X-ray Diffraction of Distributed Bragg Reflector

Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double- crystal X- ray diffraction measurement. The expected high quality epitaxial DBR structure was verified. In the X- ray double- crystal rocking curves of DBR the zeroth- order peak, the first and second order satellite peaks were measured. Splitting of diffraction peak appeared in the rocking curves was analyzed. The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.     

Accuracy of using computed tomography to identify pedicle screw placement in cadaveric human lumbar spine

STUDY DESIGN: Utility of using computed tomography to predict pedicle screw misplacement. OBJECTIVE: This study defines the sensitivity and specificity of predicting pedicle screw placement by experienced clinicians using a CT scan image. SUMMARY OF BACKGROUND DATA: In clinical and research settings, the method most commonly used to evaluate pedicle screws placement has been computed tomography. However, no current literature describes the accuracy of this method of evaluating screw placement. METHOD: Cobalt-chrome and titanium alloy pedicle screws of identical size were placed in six cadaveric human lumbar spine. Wide laminectomy was performed to allow complete visualization of the pedicles. Three consecutive lumbar levels were instrumented in each spine, giving 36 pedicle screw placements to identify. The instrumented spines were imaged, and four orthopaedic spine surgeons and a musculoskeletal radiologist were asked to read the images to identify the accuracy of screw placement within the pedicles. RESULTS: The sensitivity rate of identifying a misplaced screw was 67 +/- 6% for cobalt-chrome screws compared with 86 +/- 5% for titanium screws (P < 0.005). The specificity rates of radiographic diagnosis of misplaced pedicle screws were 66 +/- 10% for cobalt-chrome screws and 88 +/- 8% for titanium screws (P < 0.005). Similarly, a statistically significant difference was found in the sensitivity rates of identifying screws placed correctly in the pedicle: 70 +/- 10% for cobalt-chrome screws versus 89 +/- 8% for titanium screws (P < 0.005). Overall accuracy rates were 68 +/- 7% for cobalt chrome screws versus 87 +/- 3% for titanium screws (P < 0.002). CONCLUSION: Reliance on the computed tomography scan data alone in determining accuracy of pedicle screws can lead to inaccuracies in both clinical and research conditions.     

高频微型脉冲管制冷机的实用化研究

脉冲管制冷机经过多年的发展，性能不断改善，目前已开始进入实用化阶段。高频微型脉冲管制冷机结构紧凑，应用方便，并且主要工作在需求量较大的液氮温区，因此将首先得到一定规模的应用。介绍了作者针对脉冲管制冷机在红外和超导方面的应用所作的实用化工作，讨论了尚待解决的问题。     

材质对蜂窝纸板缓冲性能的影响

对两种不同材质的蜂窝纸板静态应力应变性能和动态缓冲结果进行了比较分析。讨论了蜂窝纸板力学性能对应变速度的敏感性及两种纸板的缓冲性能差异。缓冲试验结果表明。在不同的冲击应变率下蜂窝纸板的材质影响蜂窝纸板缓冲性能。     

液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响     

ECAP细化晶粒法的仿真与分析

ECAP(Equal Channel Angular Extrusion)方法，是实现材料纯剪切变形的有效方法。本文采用有限元（FEA）分析软件ANSYS对Al的挤压过程进行仿真与分析。分析结果表明：外切角Φ、圆角半径、试样与凹模之间的摩擦系数、凹模本身的特性（如弹性模量、泊松比等）等等，对材料的变形量都有不同程度的影响。     

N- and O-glycosylation muteins of recombinant human erythropoietin secreted from BHK-21 cells

Single-site glycomuteins of recombinant human erythropoietin (rhuEpo) were constructed and transiently and stably expressed in BHK-21 cells. The transient expression levels varied among muteins, being highest for mutein rhuEpoGln24 followed by wild-type rhuEpo (rhuEpowt). All other glycomuteins, including rhuEpoGln38, rhuEpoGln83, rhuEpoThr126, and rhuEpoGly126, were secreted at lower levels than rhuEpowt. Muteins expressed in stable cell lines showed similar differences in expression levels. Also each mutein could be affinity-purified from culture supernatants, and was biologically active in vivo. Based on secretion rates from BHK-21 cells, the most potent erythropoietin was rhuEpoGln24. This mutein is also considered to have biologic activities that are superior to rhuEpowt.     

基于MetaFrame的中小企业ASP服务平台解决方案*

介绍了ASP模式的概念、优点,分析了MetaFrame的技术特点及基于服务器计算体系结构。在此基础上提出了一套基于MetaFrame的中小企业ASP服务平台解决方案,并给出具体的应用示例。