8-羟基喹啉-N-氧化物和5,7-二硝基-8-羟基喹啉-N-氧化物与Au(Ⅲ)、Pd(Ⅱ)的配合物之合成

合成4种标题配合物,用元素分析、红外和紫外光谱、摩尔电导、核磁共振氢谱、荧光光谱及X射线粉末衍射物相分析研究了它们的组成和性质及其结构。按结构将配合物分为两类,一是含氢键的离子缔合物;一是含金属—氧键的螯环型配合物。     

浅谈出口巴基斯坦铁路客车新型酚醛玻璃钢风道的研制开发

本文阐述了新型酚醛玻璃钢风道的成型工艺、开发过程，并与传统玻璃钢风道作了比较，论述了新型酚醛玻璃钢风道的优点，并对其应用前景和对铁路客车的设计思路的影响进行了探讨。     

Optimum sweeps of simple polygons with two guards

A polygon P admits a sweep if two mobile guards can detect an unpredictable, moving target inside P  , no matter how fast the target moves. Two guards move on the polygon boundary and are required to always be mutually visible. The objective of this study is to find an optimum sweep such that the sum of the distances travelled by the two guards in the sweep is minimized. We present an O(n²)$O(n^2)$ time and O(n)$O(n)$ space algorithm for optimizing this metric, where n   is the number of vertices of the given polygon. Our result is obtained by reducing this problem to finding a shortest path between two nodes in a graph of size O(n)$O(n)$.     

一种基于多核嵌入式系统的TD-LTE同步校正方法

针对TD-LTE系统中同步性错误随机发生的问题,提出了一种通过ARM+DSP+FPGA平台的嵌入式系统实现帧号和原语的同步校正方法。该方法基于TD-LTE射频一致性测试仪表硬件平台,通过该嵌入式系统中ARM、DSP、FPGA间的协调工作,由GPMC模块通过帧号和原语两方面对系统同步性进行校正。在TD-LTE射频一致性测试仪表硬件平台中进行了验证,结果表明,该方法在实现帧号与子帧号同步校正的基础上明显提高了TD-LTE系统通信的稳定性。     

Discourse cues to deception in the case of multiple receivers

Behavioral cues to deception are instrumental in detecting deception. As one of the primary sources of deception behavior, text has been analyzed at the level of sub-sentence or message but not the discourse of interaction. Additionally, empirical studies on cues to deception in the case of multiple receivers remain nonexistent. To fill these voids, we propose a discourse framework and six hypotheses about deception behaviors in a multi-receiver environment. The deception behaviors are operationalized by discourse features based on an analysis of real-world data. The results of statistical analysis validate the efficacy of discourse features in discriminating deceivers from truth-tellers.     

Development of poly(vinyl chloride)/wood composites. A literature review

Poly(vinyl chloride)/wood fiber (flour) composites are currently experiencing a dramatic increase in use. Most of them are used to produce window/door profiles, decking, railing, and siding by using conical counterrotating intermeshing twin‐screw extruders. Heat stabilizers, processing aids, impact modifiers, lubricants, and pigments are still important for PVC/wood composite formulations. Poly[methylene(polyphenyl isocyanate)] (PMPPIC), γ‐aminopropyltriethoxysilane, maleated polypropylene (MAPP), and copper metallic complex have proved to be effective coupling agents for this composite system. Mechanical properties of PVC/wood composites can be enhanced by combining wood with mica or glass fibers to form hybrid reinforcements. Ultraviolet light resistance and weathering dimensional stabilities of PVC/wood composites are superior to those of natural wood. Density reduction can be achieved through the microcellular foaming technique by using chemical blowing agents, such as azodicarbonamide and sodium bicarbonate, or physical blowing agents, such as carbon dioxide. J. Vinyl Addit. Technol. 10:59–69, 2004. © 2004 Society of Plastics Engineers.     

Automatic moment segmentation and peak detection analysis of heart sound pattern via short-time modified Hilbert transform

This paper proposes a novel automatic method for the moment segmentation and peak detection analysis of heart sound (HS) pattern, with special attention to the characteristics of the envelopes of HS and considering the properties of the Hilbert transform (HT). The moment segmentation and peak location are accomplished in two steps. First, by applying the Viola integral waveform method in the time domain, the envelope (E_T) of the HS signal is obtained with an emphasis on the first heart sound (S1) and the second heart sound (S2). Then, based on the characteristics of the E_T and the properties of the HT of the convex and concave functions, a novel method, the short-time modified Hilbert transform (STMHT), is proposed to automatically locate the moment segmentation and peak points for the HS by the zero crossing points of the STMHT. A fast algorithm for calculating the STMHT of E_T can be expressed by multiplying the E_T by an equivalent window (W_E). According to the range of heart beats and based on the numerical experiments and the important parameters of the STMHT, a moving window width of N = 1 s is validated for locating the moment segmentation and peak points for HS. The proposed moment segmentation and peak location procedure method is validated by sounds from Michigan HS database and sounds from clinical heart diseases, such as a ventricular septal defect (VSD), an aortic septal defect (ASD), Tetralogy of Fallot (TOF), rheumatic heart disease (RHD), and so on. As a result, for the sounds where S2 can be separated from S1, the average accuracies achieved for the peak of S1 (AP₁), the peak of S2 (AP₂), the moment segmentation points from S1 to S2 (AT₁₂) and the cardiac cycle (ACC) are 98.53%, 98.31% and 98.36% and 97.37%, respectively. For the sounds where S1 cannot be separated from S2, the average accuracies achieved for the peak of S1 and S2 (AP₁₂) and the cardiac cycle ACC are 100% and 96.69%.     

Delay time compensation based on coefficient of restitution for collision hybrid motion simulator

A hybrid motion simulator embeds a hardware experiment in a numerical simulation loop. However, it is often subjected to the inherent problem of an energy increase in the collision of two pieces of hardware in a loop because of the delay time. This paper proposes a delay time compensation method based on contact dynamics model for a collision hybrid motion simulator under delay time and establishes a compensation method for coupled translational and rotational motion. The model developed in this paper describes linear uniform motion of a floating object during the period of the delay time until the force and torque are observed and non-linear motion according to environmental stiffness after the initial delay time period in contact. By using the above model, compensation parameters are designed based on desired coefficient of restitution with iterative calculation. The proposed method achieves accurate delay time compensation and simultaneously realizes a variable desired coefficient of restitution over a wide range of frequencies. Furthermore, the compensation method for multi-dimensional motion is established under the assumption that the friction effect is very small. The efficiency of the proposed method is verified through collision experiments for the coupled motion in two dimensions.     

JackHare: a framework for SQL to NoSQL translation using MapReduce

As data exploration has increased rapidly in recent years, the datastore and data processing are getting more and more attention in extracting important information. To find a scalable solution to process the large-scale data is a critical issue in either the relational database system or the emerging NoSQL database. With the inherent scalability and fault tolerance of Hadoop, MapReduce is attractive to process the massive data in parallel. Most of previous researches focus on developing the SQL or SQL-like queries translator with the Hadoop distributed file system. However, it could be difficult to update data frequently in such file system. Therefore, we need a flexible datastore as HBase not only to place the data over a scale-out storage system, but also to manipulate the changeable data in a transparent way. However, the HBase interface is not friendly enough for most users. A GUI composed of SQL client application and database connection to HBase will ease the learning curve. In this paper, we propose the JackHare framework with SQL query compiler, JDBC driver and a systematical method using MapReduce framework for processing the unstructured data in HBase. After importing the JDBC driver to a SQL client GUI, we can exploit the HBase as the underlying datastore to execute the ANSI-SQL queries. Experimental results show that our approaches can perform well with efficiency and scalability.     

A new Chinese character recognition approach based on the fuzzy clustering analysis

In this paper, a new Chinese character recognition (CCR) approach is proposed based on the fuzzy clustering analysis theory. Chinese characters (CCs) have various similar radicals and stroke components, which make it difficult to recognize features in the CCR process. At the same time, the recognition accuracy and the efficiency are lower when the objects to be recognized are complex. In order to solve these problems, a fuzzy clustering analysis method is introduced to enhance the computing efficiency. At first, the CCs including learning samples and testing samples are transformed into binarization templates in the form of matrixes. Then, the minimum distance algorithm is applied to calculate ‘distances’ between the testing sample templates and the learning sample templates. At last, the character recognition can be achieved by searching the minimum distance from the results. The experiment results of the CCR process can prove the effectiveness and accuracy of the new method.