钢渗铬层上金刚石薄膜的表面、界面结构及附着性

在钢渗铬层表面用化学气相沉积(CVD))法制备了金刚石薄膜.使用扫描电镜(SEM)、透射电镜(TEM)和压痕法研究了金刚石膜的表面、界面结构及附着力.用拉曼光谱分析了金刚石膜的纯度及非金刚石碳相.甲烷含量超过0.6%(体积分数)后,金刚石膜为球形纳米晶,形核密度＞107cm-2.用甲烷含量为0.6%(体积分数)沉积的金刚石膜表面的残余压应力为1.22 Gpa,而膜背面的残余压应力更高,达2.61 Gpa.压痕显示在19.6 N载荷下膜发生开裂.TEM观察发现,膜/基界面为微观非平面,有利于提高金刚石膜的附着力.     

河湖管理范围内渔光互补项目存在的问题与对策

本文通过调研江西省河湖管理范围内渔光互补光伏发电项目开展的实际情况,针对存在的问题,提出相应的对策和建议,为有效开展河湖管理范围内光伏发电项目提供一定的参考依据。     

基于压缩空气储能的新型冷热电联供系统性能研究

为了解决用户负荷需求在时间上的变动和传统冷热电联供（Combine Cooling, Heating & Power, CCHP）系统大部分时间处于非设计工况下运行导致系统的能源利用效率较低的问题,提出了一种耦合压缩空气储能系统（Compressed Air Energy Storage system, CAES）和蓄热装置的新型CCHP系统（CAES based CCHP system,CAES CCHP）,建立系统的热力学模型,在给定的充、放电工作条件下对CAES CCHP系统的热力学性能进行分析,并对影响该系统性能的CAES压气机压缩比、透平进气口压力、流经CAES的烟气质量流量3个关键参数进行敏感性分析。研究结果表明：CAES CCHP系统能实现冷热电灵活调控,且系统的CAES功转换效率为57.41%,一次能源利用率、一次节能率及火用效率分别为76.22%,24.84%和31.97%,比传统的CCHP系统分别提高10.97%,18.15%和7.58%。     

矿区D级GPS控制网建设实践

介绍了徐州市丰县D级GPS控制网建设中起算数据的利用、控制网的布设、GPS点位的选取、观测与外业数据的检核、平差计算与精度分析等技术步骤的实施方法和过程。实践表明,通过以上方法和技术过程建立的丰县D级GPS控制网精度良好,满足相应规范要求,对同类地区GPS控制网建设具有一定借鉴意义。     

Metal–Organic Gel‐Derived FexOy/Nitrogen‐Doped Carbon Films for Enhanced Lithium Storage

The development of cost‐effective and flexible electrodes is demanding in the field of energy storage. Herein, flexible Fe_xO_y/nitrogen‐doped carbon films (Fe_xO_y/NC‐MOG) are prepared by facile electrospinning of Fe‐based metal–organic gels (MOGs) followed by high‐temperature carbonization. This approach allows the even mixing of fragile coordination polymers with polyacrylonitrile into flexible films while reserving the structural characteristics of coordination polymers. After thermal treatment, Fe_xO_y/NC‐MOG films possess uniformly distributed Fe_xO_y nanoparticles and larger accessible surface areas than traditional Fe_xO_y‐NC films without MOG. Taking advantage of the unique structure, Fe_xO_y/NC‐MOG exhibits a superior rate performance (449.8 mA h g^?1 at 5000 mA g^–1) and long cycle life (629.3 mA h g^–1 after 500 cycles at 1000 mA g^–1) when used as additive‐free anodes in lithium‐ion batteries.     

Editable Supercapacitors with Customizable Stretchability Based on Mechanically Strengthened Ultralong MnO2 Nanowire Composite

Although some progress has been made on stretchable supercapacitors, traditional stretchable supercapacitors fabricated by predesigning structured electrodes for device assembling still lack the device‐level editability and programmability. To adapt to wearable electronics with arbitrary configurations, it is highly desirable to develop editable supercapacitors that can be directly transferred into desirable shapes and stretchability. In this work, editable supercapacitors for customizable shapes and stretchability using electrodes based on mechanically strengthened ultralong MnO₂ nanowire composites are developed. A supercapacitor edited with honeycomb‐like structure shows a specific capacitance of 227.2 mF cm^?2 and can be stretched up to 500% without degradation of electrochemical performance, which is superior to most of the state‐of‐the‐art stretchable supercapacitors. In addition, it maintains nearly 98% of the initial capacitance after 10 000 stretch‐and‐release cycles under 400% tensile strain. As a representative of concept for system integration, the editable supercapacitors are integrated with a strain sensor, and the system exhibits a stable sensing performance even under arm swing. Being highly stretchable, easily programmable, as well as connectable in series and parallel, an editable supercapacitor with customizable stretchability is promising to produce stylish energy storage devices to power various portable, stretchable, and wearable devices.     

Metallic Graphene Nanoribbons

Isolated graphene nanoribbons(GNRs)usually have energy gaps,which scale with their widths,owing to the lateral quantum confinement effect of GNRs.The absence of metallic GNRs limits their applications in device interconnects or being one-dimensional physics platform to research amazing properties based on metallicity.A recent study published in Science provided a novel method to produce metallic GNRs by inserting a symmetric superlattice into other semiconductive GNRs.This finding will broader the applications of GNRs both in nanoelectronics and fundamental science.     

一种双靶磁控溅射制备的Mg掺杂的NiO薄膜

采用磁控溅射“共溅射”方法,将Ar气作为溅射气体,高纯NiO和MgO双陶瓷靶作为溅射靶材。当控制NiO和MgO靶的溅射功率分别为190 W和580 W,溅射真空度为2 Pa,衬底温度为300℃时,得到了Mg掺杂的NiO(Ni_0.61Mg_0.39O)薄膜。该薄膜是一种具有(200)择优取向的晶态薄膜。薄膜表面比较平整,晶粒分布致密,晶粒尺寸约46.9 nm。(200)衍射峰位置相对未掺杂的NiO薄膜向小角度偏移约0.2°。合金薄膜在可见光波段具有较大的透过率,而在300 nm附近透过率陡然下降,其光学带隙向高能方向移动到了3.95 eV。该研究为采用磁控溅射制备高质量的Mg掺杂的NiO薄膜提供了技术支撑。     

一种新的TCP/AQM模型的高带宽拥塞控制算法

TCPs/AQMs算法在多种环境下的组合研究已十分广泛,但主要采用TCP Reno与各种AQMs算法在低带宽下的组合。利用显示反馈的思想,提出一种以H-TCP/BLUE为基础模型的高带宽拥塞控制算法,称为H-TCP*/BLUE*。仿真结果表明,新的组合算法比基础算法提高了带宽利用率、RTT公平性和友好性。     

神经元网络场电位的迭代学习控制研究

基于映射神经元模型和Hindmarsh-Rose神经元模型构建小世界神经网络,并施加带有遗忘因子的迭代学习控制算法,以实现神经网络的同步控制。仿真结果表明迭代学习控制同时适用于离散的和连续的神经网络模型,可以实现神经网络同步和去同步状态的相互转化,其优势在于随着迭代次数的增加,控制信号强度逐渐减弱,从而保持神经元本身的放电特性不变。所得结果为将非线性控制理论应用于帕金森等神经疾病控制提供了新思路。