不锈钢复合板热疲劳性能分析

利用冷热疲劳试验机模拟分析了冷热循环对不锈钢复合板热疲劳性能的影响,并采用扫描电镜、电子探针和电子背散射衍射仪对热疲劳试样V形缺口及裂纹区域的形貌和成分进行了深入分析。结果表明,不锈钢复合板热疲劳试样经 20~550 ℃ 7 500次冷热循环后,结合界面处V形缺口区出现微裂纹,且微裂纹起裂于V形缺口尖端基层侧。随着冷热循环的继续进行,微裂纹向基层内扩展,但并非沿着结合界面处扩展,而是沿着基层侧扩展。此外,热疲劳裂纹的起裂和扩展与氧化和应力作用有关,微裂纹起裂于热疲劳试样 V 形缺口区域基层侧表层局部氧化孔洞,并在冷热循环的应力作用下向基层内扩展,同时加剧氧化。随着冷热循环的继续进行,晶界氧化逐渐加剧,导致微裂纹扩展成更为明显的裂纹。     

Preparation and characterization of high salts polymer electrolyte based on poly（lithium acrylate）

1　INTRODUCTIONWorldwide research and efforts are currentlyunderway to fabricate all solid state, rechargeableLi and Li ion batteries utilizing Li+ conductivepolymer electrolytes[1]. Solid polymer electrolytespossesses many advantages including high ionicconductivity, high specific surface energy, solventfree, wide electrochemical stability windows, lightand easy processability[2]. Apart from polyethy lene oxide ( PEO )[3], poly ( vinyl alcohol )(PAV)[4], …     

应变速率对中碳低温贝氏体钢强塑性的影响

摘要：为探索低温贝氏体钢的断裂行为,研究应变速率对低温贝氏体钢TRIP效应的影响,采用不同应变速率的拉伸试验对低温贝氏体钢的强塑性进行研究。利用扫描电镜（SEM）、透射电镜（TEM）及X射线衍射（XRD）等试验方法对低温贝氏体钢的微观组织、断口形貌及裂纹走向进行表征。结果表明,随着应变速率的提高,试验钢的屈服强度由771MPa上升至806MPa,抗拉强度由1554MPa上升至1606MPa,断后伸长率由13.5%下降至9.0%。主要原因是高应变速率拉伸引发的绝热温升抑制了残余奥氏体的马氏体相变,对试验钢塑性造成负面影响。     

矢功率谱与RBF网络结合在旋转机械故障诊断中的应用

与传统功率谱相比,矢功率谱融合了多通道的能量信息,反映的信息更全面.径向基函数网络具有良好的推广能力和分类能力.基于此,本文结合矢功率谱和径向基函数网络,提出了一种新的故障识别方法,该方法以矢功率谱为特征向量,径向基函数网络为分类器.并以转子裂纹、转子不对中、油膜涡动为例进行实验研究,实验结果表明,该方法是有效的.     

APPLICATION OF MOLECULAR ORBITAL THEORY TO ANALYSIS OF PHASE STABILITY FOR ALLOYS

The critical _d vahues ( _ ) of the γ/(γ+σ).γ/(γ+μ) and γ/(γ+γ') phase boundaries insome ternar alloy phase diagrams at various temperatures are calculated by averaging the _d values of sererai selected characteristic points at the phase boundaries.Approxmateequations for the temperature dependence of the critical _d of γ/(γ+σ).γ/(γ+μ) andγ/(γ+γ') phase boundaries are established.The accuracy of the analysis is discussed in detail.It is found for the first time that the average value of the bondorder _ at the phase boundaries ts also approximatelr a constant and therefore a criticalaverage bond order _ like - can be introduced for the analysts of phase stability     

基于滑移线理论的一种模型单元

特征单元是模型元法求解塑性加工问题的基础。本文应用滑移线理论的图解法提出并求解出一种特征单元 ,推导出该特征单元形状的确定方法及单元的应力表达式 ,并对单元滑移线场变化规律作出全面定量描述。本文丰富了特征单元库 ,求解同类问题可以直接套用这种单元 ,简化了计算过程     

Performances of electrically heated microgroove vaporizers

An electrically heated microgroove vaporizer was proposed. The vaporizer mainly comprised an outer tube, an inner tube and an electrical heater cartridge. Microgrooves were fabricated on the external surface of the inner tube by micro-cutting method, which formed the flow passage for fluid between the external surface of the inner tube and the internal surface of the outer tube. Experiments related to the temperature rise response of water and the thermal conversion efficiency of vaporizer were done to estimate the influences of microgroove＇s direction, feed flow rate and input voltage on the performances of the vaporizer. The results indicate that the microgroove＇s direction dominates the vaporizer performance at a lower input voltage. The longitudinal microgroove vaporizer exhibits the best performances for the temperature rise response of water and thermal conversion efficiency of vaporizer. For a moderate input voltage, the microgroove＇s direction and the feed flow rate of water together govern the vaporizer performances. The input voltage becomes the key influencing factor when the vaporizer works at a high input voltage, resulting in the similar performances of longitudinal, oblique and latitudinal microgroove vaporizers.