氨基酸脱羧反应研究进展

氨基酸脱羧是重要的生物质资源转化途径,通过氨基酸脱羧反应能够得到胺及胺的衍生物。该文综述了氨基酸脱羧基的不同方法,包括酶脱羧、化学催化脱羧、热脱羧和光电化学脱羧方法。重点阐述了使用化学催化剂脱羧的研究进展,对均相催化剂和非均相催化剂催化脱羧的催化途径以及机理进行了详细的介绍。中国目前已经成为氨基酸的生产与消费大国,氨基酸工业在食品与饲料等领域的发展已经趋于成熟,但是对氨基酸下游产品的工业化仍然缺少配套的技术与经验。为了应对氨基酸工业核心技术的垄断问题,开发新型高效催化剂与更加高效的工艺路线的研究显得尤为重要。     

煤矸石对硅酸盐水泥水化历程的影响

从强度、反应程度、孔溶液碱度和SEM等方面,研究了煤矸石作为水泥辅助胶凝材料的水化情况,并与Ⅱ级粉煤灰进行比较。试验结果表明:煤矸石发生火山灰反应时间比粉煤灰早,且发生火山灰反应所需的碱度值比粉煤灰低;掺煤矸石水泥水化样的早期抗压强度比粉煤灰水泥水化样低,但7d到28d强度增长速率明显大于相同掺量的粉煤灰水泥,相同28d抗压强度的条件下,煤矸石掺量比粉煤灰的掺量高10%。     

植酸制备的研究

介绍了制备植酸的一种新方法及制备过程，对实验的各个影响因素作了细致的讨论，得到了实验的最佳工艺条件。     

八碳烯分离工艺的研究

从能量综合集成的角度提出了八碳烯精馏分离工艺 ,对所提流程进行了优化模拟计算及分析 ,为八碳烯分离工艺的施工设计提供了充分的依据。投产情况表明 ,该研究改变了八碳烯的生产现状 ,使得八碳烯生产的经济效益显著提高     

骨架材料对全钢载重子午线轮胎性能的影响

讨论骨架材料的规格、结构分布及工艺控制对全钢载重子午线轮胎性能的影响。胎体帘布采用带有外缠丝的 3 + 9+ 15× 0 2 2 + 0 15规格钢丝、胎体帘线密度在 45 0～ 65 0根·m- 1 范围内 (帘线直径大于 1 2mm)以及胎体反包端点在成品外轮廓曲线的第 2或 3条装配线上等措施均有利于保证胎体强度 ;合理设计带束层结构 ,端点与胎侧肩部花纹距离取 10mm左右有利于消除应力过度集中 ;采用钢丝增强带有利于提高胎圈刚性。     

工业PTA氧化过程4-CBA浓度的模糊神经网络模型

A fuzzy neural network (FNN) model is developed to predict the 4-CBA concentration of the oxidation unit in purified terephthalic acid process. Several technologies are used to deal with the process data before modeling.First,a set of preliminary input variables is selected according to prior knowledge and experience. Secondly,a method based on the maximum correlation coefficient is proposed to detect the dead time between the process variables and response variables. Finally, the fuzzy curve method is used to reduce the unimportant input variables.The simulation results based on industrial data show that the relative error range of the FNN model is narrower than that of the American Oil Company (AMOCO) model. Furthermore, the FNN model can predict the trend of the 4-CBA concentration more accurately.     

Preparation of hyperbranched polymers by atom transfer radical polymerization

A cheap acrylic AB* monomer, 2‐(2‐chloroacetyloxy)‐isopropyl acrylate (CAIPA), was prepared from 2‐hydroxyisopropyl acrylate with chloroacetyl chloride in the presence of triethylamine. The self‐condensing vinyl polymerization by atom transfer radical polymerization (ATRP), a “living”/controlled radical polymerization, has yielded hyperbranched polymers. All the polymerization products were characterized by proton nuclear magnetic resonance spectroscopy (¹H NMR). CAIPA exhibited distinctive polymerization behavior that is similar to a classical step‐growth polymerization in the relationship of molecular weight to polymerization time, especially during the initial stage of the polymerization. However, a significant amount of monomer remained present throughout the polymerization, which is consistent with typical chain polymerization. Also, if a much longer polymerization time was used, the polymer became gel. As a result of the unequal reactivity of group A* and B*, the polymerization is different from an ideal self‐condensing vinyl polymerization: the branch structures of polymers prepared depend dramatically on the ratio of 2,2'‐bipyridyl to CAIPA. Hyperbranched polymers exhibit improved solubility in organic solvent, however, they have lower thermal stability than their linear analogs. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2114–2123, 2002     

采用改进的温梯法生长氟化钙晶体

对现有的晶体生长温梯法进行改进,将炉内温场分为坩埚底部温度高于坩埚顶部温度的化料区和坩埚底部温度低于坩埚顶部温度的温梯生长区两部分.通过对坩埚相对于温场位置的控制,获得适宜进行熔体均一化和晶体生长条件.生长了尺寸为φ135 mm×150 mm氟化钙(CaF2)晶体,生长的CaF2晶体质量较好,位错密度＜330/mm2,从190 nm到9000 nm透过良好,紫外200 nm处和红外9 μm处透过率可达80%以上.     

输出窗材料的研究进展

输出窗是高真空微波管中的关键构件,本文对目前应用的各种输出窗材料的性能、制备以及应用现状进行了评述。针对大功率毫米波微波管用输出窗材料的需求,提出了制备输出窗复相陶瓷以及创新制备方法等解决思路。     

HPAM的相对分子量及电解质对LPS封堵性能的影响

采用微孔滤膜过滤法研究了在部分水解聚丙烯酰胺(HPAM)与交联剂柠檬酸铝(A lC it)的交联比确定的情况下,HPAM的相对分子量以及电解质对交联聚合物溶液(LPS)封堵性能的影响。结果表明,随着HPAM的相对分子质量的增大,HPAM与A lC it反应的时间增加,同时通过3μm微孔滤膜的过滤时间先增加后降低。LPS体系中电解质存在一个最佳的影响范围,当电解质(氯化钠、钙镁离子共同影响)的含量在5000~6000 mg/kg时,仍然可以得到稳定的胶态分散体系,且体系对多孔介质有较好的封堵效果。