CVD金刚石膜{100}取向在改进化学反应模型下生长的原子尺度模拟

建立了CVD金刚石膜{100}取向生长过程中的化学反应模型，表面吸附生长机制以沟槽处碳氢组元加入的机制为主，并用改进的KMC方法在原子尺度上模拟了该模型下（100）表面的生长过程，给出了衬底温度和甲基浓度等操作参数对膜质量的影响，结果表明，该化学反应模型能够较实际地揭示{100}取向CVD金刚石膜的生长。     

压痕法测定热压MoSi2基复合材料K1C值的研究

用不同的压痕方程计算了纳米ＺｒＯ２粒子韧化ＭｏＳｉ２基复合材料的室温断裂韧性Ｋ１ｃ值，同时研究了压痕载荷对Ｋ１ｃ值的影响。结果表明，试验材料在试验条件下的断裂韧性不遵从半月状裂纹系统方程，而遵从巴氏裂纹系统方程，其室温压痕断裂韧性保持与压痕载荷的独立性。     

Gr（C）纤维增强镁基复合材料的界面结构

采用真空—压力浸渗工艺制备Ｇｒ（Ｃ）／Ｍｇ复合材料，Ｇｒ／Ｍｇ材料界面上无化学反应迹象，有析出物γ相（Ｍｇ１７Ａｌ１２），该析出物形状、大小与制备工艺条件，主要是纤维预制件温度有关。Ｃ／Ｍｇ复合材料界面Ａｌ含量较基体高出２倍多，文中分析了可能的原因     

有减水作用的新型高效陶瓷助磨剂研制

利用曼尼奇反应原理 ,制备了多胺基磷酸钠陶瓷助磨剂 ,采用红外光谱、差热分析等对合成的助剂进行了表征 ;此外 ,通过对氧化铁以及石英滑石等原料的助磨应用测试表明 :合成的助剂是一种高效陶瓷助磨剂 ,同时还具有减水作用。     

高岭土改性聚酯纤维

介绍了高岭土在改性聚酯中的作用、纤维级高岭土的性质以及改性聚酯的制造方法．指出了我国开发高岭土改性聚酯纤维的的前景．     

聚氨酯防水涂料及其市场发展概况

聚氨酯防水涂料是当今最有效的柔性防水材料之一，介绍了聚氨酯防水涂料的发展状况，并对其市场前景进行了展望。     

分光光度法测定锌铁合金镀层及镀液中的铁

采用分光光度法，以磺基水杨酸为显色剂、双氧水为氧化剂，锌铁合金镀层用稀盐酸溶解，控制pH值为1.5～3，在等吸收点处测定吸光度，并根据比耳定律计算镀层及镀液中的铁含量。     

Medium-Term Hydro Generation Scheduling (MTHGS) with Chance Constrained Model (CCM) and Dynamic Control Model (DCM)

Medium-Term Hydro Generation Scheduling (MTHGS) plays an important role in the operation of hydropower systems. In the first place, this paper presents a Chance Constrained Model for solving the optimal MTHGS problem. The model recognizes the impact of inflow uncertainty and the constraints involving hydrologic parameters subjected to uncertainty are described as probabilistic statements. It aims at providing a more practical technique compared to the traditional deterministic approaches used for MTHGS. The stochastic inflow is expressed as a simple discrete-time Markov chain and Stochastic Dynamic Programming is adopted to solve the model. Then in order to use the information of long-term inflow forecast to improve dispatching decisions, a Dynamic Control Model is developed. Short-term forecast results of the current period and long-term forecast results of the remaining period are treated as inputs of the model. Finally, the two methods are applied to MTHGS of Xiluodu hydro plant in China. The results are compared to those obtained from Deterministic Dynamic Programming with hindsight and advantages and disadvantages of the two methods are analyzed.     

大庆30万吨乙烯装置开工锅炉的化学清洗

大庆石化总厂３０万吨乙烯进口开工锅炉，开车前必须进行化学清洗。针对进口锅炉清洗方案中所列药剂，其一购之既需要外汇；其二按之清洗后的排放液含有致癌物，对其处理也较困难。通过选用国产药剂，采用新的清洗方法及工艺，既达到了满意清洗效果，又避免了致癌物的污染，还为国家节省了外汇。     

Effect of cobalt oxide on surface structure of alumina supported molybdena catalysts studied by in situ Raman spectroscopy

A set of Co promoted 10% Mo/Al₂O₃ samples have been characterized by means of Raman spectroscopy under ambient as well as in situ dehydrated conditions. Under ambient conditions, the degree of the polymerization of surface molybdenum oxide species decreases with increasing Co loading. Under dehydrated conditions, the polymeric molybdenum oxide species is absent with the addition of only 0.2% Co. At low Co loadings (2%), before the formation of CoMoO₄ compound, the spectral features are very similar under ambient conditions. Dehydration causes the upward shift of the Mo=O symmetric stretching mode. A broad band around 920–930 cm^–1 was thus observed. This band has been suggested to be associated with the Co-Mo interaction species. In contrast to crystalline CoMoO₄, this species shows a reversibility on H₂ reduction-O₂ reoxidation treatments. From the results obtained, it is proposed that cobalt oxide interacts with the most polymerized molybdenum oxide species to form Co-Mo interaction species and/or crystalline CoMoO₄; therefore, the amount of the surface molybdenum oxide species decreases with a change in the molecular structure as a function of the Co concentration.