α厚层测量法的定标方法探讨

本文比较了几种常用的α厚层测量法的定标方法。实验结果表明,共沉淀法是一种比较理想的定标方法,它所制得的标准样品的定标曲线线性较好,探测效率较稳定。     

微重力落塔电磁悬吊、释放技术研究

论述了微重力落塔电磁悬吊、释放、提升机构的关键技术,电磁释放过程的特性分析以及微重力落塔实际试验的情况。分析说明:悬吊、释放性能的好坏决定了试验落舱的微重力水平,也是微重力落塔试验能否成功的关键技术。     

A new kind of compound solid-state quasi-optical power combiner

In this paper, a new kind of solid-state quasi-optical power combiner is presented. It consists of two or more singlecavity multiple-device power combiners and a Fabry-Perot cavity. The experimenal results using six Gunn diodes at X-band show that the total output power is higher than 400 mW, the total combining efficiency is as high as 83%, and the frequency stability is better than 10^?5.     

用稳态反饱和吸收法测量C_（60）的激发态吸收截面

用准连续激光实现了Ｃ６０的稳态反饱和吸收，通过实验和理论计算的拟合，确定了Ｃ６０的三重第一激发态吸收截面。     

Efficient 3-d capacitance extraction considering lossy substrate with multilayered green's function

An efficient algorithm for extraction of three-dimensional (3-D) capacitance on multilayered and lossy substrates is presented. The new algorithm presents a major improvement over the quasi-3-D approach used in a Green's function-based solver and takes into consideration the sidewalls of 3-D conductors. To improve the efficiency of the computation and the transformation of the Green's function, a nonuniform grid is adopted. The most computationally intensive part in the transformation of the Green's function is computed separately as technology-independent matrices Tk foremost. Once computed, Tk can be stored and used for any technology, thus the storage requirement and computational complexity are reduced from O (S/sup 2/) and O (S/sup 2/ log S/sup 2/), respectively, to just O [(log S/sub max/)/sup 2/]. Extensive tests have been performed to verify the new algorithm, and its accuracy has been established by comparing with other programs.     

添加剂强化重油催化裂化的过程分析与应用

运用工程化学原理分析讨论了添加剂强化重油催化裂化的过程，包括分散稳定气泡、改善雾化、保护酸中心、抑制焦炭生成以及提高重油气化率的胶体结构改性、降低表面张力和改善微孔润湿，并用以指导强化重油催化裂化添加剂的筛选。建立小型固定流化床催化裂化实验装置评价了添加剂的强化效果。结果表明，添加剂强化重油催化裂化可降低催化剂生焦1．0％左右，提高总液体收率1．0％～2．8％。     

一种新型艺术釉——绒光釉

通过分析易结晶原料的性能特点，确立了合理的绒光釉配方及相应的工艺参数，探讨了釉料形成机理，研制出一种适合精陶及其它陶瓷产品的艺术釉－绒光釉。     

温度场下超长楼板中抗裂筋的定量分析

本文对超长结构楼板在温度场下的行为进行理论研究和计算分析，并推导简便可行的计算公式。为超长楼板抗裂筋设计提供定量的方法，可供相关专业技术人员参考。