1999年长江洪水及几点认识

Following the basin wide heavy flood on Changjiang River in 1998, a si gnificant flood occurred in 1999. Comparative analysis of both floods in terms of flows and flooding situations shows that both floods had one common feature, that is, the flood stages were fairly high. But they differed greatly at the sa me time, that is, the 1998 flood was a basin wide heavy one while the 1999 flood was a significant local one. At Yichang station there occurred eight flood pea ks in 1998, while in 1999 only three peaks took place. The maximum peak dischar ge at this station in 1999 was 57 600 cubic meters per second, which was smaller than that in 1998. The maximum flood-volume in 30 d of the 1998 flood at this s t ation equaled that in 1954, when an extraordinary heavy flood happened on the River, while the maximum flood-volume in 30 d in 1999 was 25.8 billion cubic me t ers per second smaller than the 1998 one. It is seen that inflow floods from th e upstream Changjiang River (above Yichang) in 1999 were not so big. Comparison of flood volumes in longer period shows that the 1999 flood was relatively conc entrated while the 1998 one had lasted longer duration. Analysis shows that flo oding situations in both years differed significantly in terms of the flood volu mes diverted from river channels due to dyke breaches and collapses, the cases o f polder embankment collapses, the areas of inundated cultivated land and the nu mbers of dangerous events for hydraulic structures. These differences had been resulted from the different properties of both floods and the dyke strengthening efforts made after the 1998 flood. It is seen that flood control engineering c onstructions initiated in the days following the 1998 flood have played an impor tant role in fighting the 1999 flood.     

生态型护岸在管道水工保护中的应用

长输管道穿越河流后,针对河流岸堤的恢复,传统施工工艺多采用浆砌块石或混凝土等硬质材料,与原河道堤岸不和谐,破坏了自然河流的生物链,而生态型护岸既可防止水土流失,又可满足生态环境要求,是管道施工大开挖穿越河流后堤岸恢复的好方法.文章结合泰国Wang Noi Kaeng Khoi天然气管道项目,介绍了生态型护岸技术的特点、施工工艺及实施效果.     

计算机设备管理系统的设计和实现

文章介绍了已在中国建设银行推广应用的计算机设备管理系统的设计与实现。     

L-带掺铒光纤放大器的研究与进展

通过理论计算，比较了C－带掺铒光纤放大器和L－带掺铒光纤放大器的增益特性，并较为全面地阐述了近几年来国内外对L－带掺铒光纤放大器的研究情况。通过对L－带掺铒光纤放大器工作原理的分析，总结出新的设计思路与方案，提出了一些新的研究点。     

单片机软件模拟SPI接口的解决方案

SPI接口是一种同步串行通讯接口，具备SPI接口的外围芯片十分丰富，应用非常广泛。但是，具备SPI接口的单片机种类较少。介绍了一种基于单片机的模拟SPI接口的方法，使没有SPI接口的单片机扩展带有SPI接口的外围芯片成为现实。     

Effect of Substrate Bias on Microstructure and Properties of Tetrahedral Amorphous Carbon Films

The microstructure and properties of tetrahedral amorphous carbon (ta-C) films deposited by the filtered cathodic vacuum arc technology has been investigated by visible Raman spectroscopy, AFM and Nano-indentor. The Raman spectra have been fitted with a s     

基于Java RMI技术的大型机群监控系统的设计与实现

机群监控系统可有效的提高大型机群的可管理性和可用性。本文提出了一种基于JAVA RMI技术的机群监控系统模型，并给出其实现方法。该系统具有开发快速、可跨平台、易于扩展等特性。     

超高纯铜的制备方法和应用

简要介绍了超高纯铜(UHPC)的几种精炼方法，以及它在工业方面的应用。并对超高纯铜的研究开发趋势及应用前景进行了展望。     

冷凝器中弓形折流板结构与两相流诱发的振动

根据两相流体诱发振动的机理与相关公式,对在两相流状态下运行的稀醋酸酐冷凝器进行了振动分析,结果表明,采用双弓形折流板可有效地防止换热器的振动。     

PEO-b-PBA对天然橡胶/高吸水树脂共混体系增容作用的研究

通过扫描电子显微镜观察了天然橡胶和高吸水树脂共混体系的微观相态结构 ,研究了两亲性嵌段共聚物PEO b PBA结构本身的吸水能力对天然橡胶和高吸水性树脂共混体系吸水性能及力学性能的影响。结果表明 ,PEO b PBA结构本身的吸水强弱对共混体系的吸水能力贡献很小 ,但却可以显著提高共混体系的吸水膨胀能力和力学性能 ,对特殊的增容作用进行了探讨