Potential thread-level-parallelism exploration with superblock reordering

The growing number of processing cores in a single CPU is demanding more parallelism from sequential programs. But in the past decades few work has succeeded in automatically exploiting enough parallelism, which casts a shadow over the many-core architecture and the automatic parallelization research. However, actually few work was tried to understand the nature, or amount, of the potentially available parallelism in programs. In this paper we will analyze at runtime the dynamic data dependencies among superblocks of sequential programs. We designed a meta re-arrange buffer to measure and exploit the available parallelism, with which the superblocks are dynamically analyzed, reordered and dispatched to run in parallel on an ideal many-core processor, while the data dependencies and program correctness are still maintained. In our experiments, we observed that with the superblock reordering, the potential speedup ranged from 1.08 to 89.60. The results showed that the potential parallelism of normal programs was still far from fully exploited by existing technologies. This observation makes the automatic parallelization a promising research direction for many-core architectures.     

有限元方法在离心机转鼓强度分析中的应用

在回顾以往转鼓强度分析的基础上 ,指出了目前转鼓有限元应力分析所存在的问题 ,给出了提高计算精度和保证模拟有效性的注意事项 ,并探讨了转鼓强度评定准则     

Fitting polynomial surfaces to triangular meshes with Voronoi squared distance minimization

This paper introduces Voronoi squared distance minimization (VSDM), an algorithm that fits a surface to an input mesh. VSDM minimizes an objective function that corresponds to a Voronoi-based approximation of the overall squared distance function between the surface and the input mesh (SDM). This objective function is a generalization of the one minimized by centroidal Voronoi tessellation, and can be minimized by a quasi-Newton solver. VSDM naturally adapts the orientation of the mesh elements to best approximate the input, without estimating any differential quantities. Therefore, it can be applied to triangle soups or surfaces with degenerate triangles, topological noise and sharp features. Applications of fitting quad meshes and polynomial surfaces to input triangular meshes are demonstrated.     

Pt/C活性催化剂催化氢化合成6-氯-2-羟基喹喔啉

以对氯邻硝基乙酰乙酰苯胺为原料，在碱性条件下经环合及催化氢化合成6-氯-2-羟基喹喔啉。采用自制的Pt／C催化剂，考察了反应条件对产品收率的影响，在85℃，1．0～1．3MPa氢气压力下进行加氢还原反应，总收率89．6％(以对氯邻硝基乙酰乙酰苯胺转化为6-氯-2-羟基喹喔啉)。     

碳铵化肥发青问题解决小结

探讨了该厂化肥生产中碳铵发青的原因,通过硫化氢含量的测定,分析了系统内外影响因素,提出了解决措施,达到了不停车稳定产品质量的目的。     

海特隆酸不饱和聚酯树脂的性能及应用

叙述了海特隆酸不饱和聚酯树脂的特点和性能，并介绍其在湿氯气和其它氧化性介质中的应用。     

异丁烯两段催化氧化制甲基丙烯酸催化剂研究 Ⅰ．异丁烯气相氧化制甲基丙烯醛多元复合氧化物催化剂的研究

本文报导用于异丁烯（叔丁醇）选择氧化制ＭＡＬ（甲基丙烯醛）的多元复合氧化物催化剂的研究结果。同共沉淀法制备的催化剂的活性主要决定于其化学组成，同时受到制备条件的影响。最佳催化剂的主要物相组成为ＰｂＯ３，Ｂｉ２ＭｏＯ３．３、ＮｉＭｏＯ４、Ｓｂ２Ｏ３及ａ－Ｆｅ２Ｏ３小颗粒。在３５５℃，１０００～２５００ｈ－１空速范围，叔丁醇：水：空气＝１：３．３：７（摩尔比）的条件下可获得异丁烯转化率达９６％，ＭＡＬ选择性达８９％的结果。     

粒径对膨胀土无荷膨胀率的影响研究

为了研究粒径大小对重塑土无荷膨胀率试验结果的影响,在符合现有规范的试验条件下,将某地基泥岩碾碎成1~2 mm、0.1~1 mm、0.1 mm的三种不同粒径,进行不同比例组合搭配的重塑土无荷膨胀率试验。试验结果表明:不同粒径大小的膨胀土样的无荷膨胀率试验结果有很大差异,并且不同粒径组合下的无荷膨胀率试验结果呈正态分布趋势,且峰值处的无荷膨胀率值为该重塑土稳定、可靠的无荷膨胀率值,无荷膨胀率试验结果接近峰值处无荷膨胀率值的粒径级配为该重塑土的最佳级配。经过分析得到使重塑土无荷膨胀率结果稳定、可靠的粒径级配是1~2 mm、0.1~1 mm、0.1 mm的土粒质量比为0∶100∶0,即使重塑土无荷膨胀率试验结果稳定可靠的粒径范围为0.1~1 mm。在该粒径范围内的重塑土无荷膨胀率试验结果最为真实、准确。     

柔性分离盘抑制圆柱涡激振动的风洞试验

该文利用附属柔性分离盘对圆柱涡激振动(VIV)控制问题进行了风洞试验研究。针对弹性支撑的圆柱及不同长度柔性分离盘的试验模型,在雷诺数7 500-40 000情况下,测定不同约化速度(3.5-18.7)下的振动瞬态位移。结果表明:柔性分离盘长度(L)/圆柱直径(D)比为0.6、0.8和1三种圆柱的横向无因次均方根振幅远小于单圆柱,涡激振动抑制效果很好,均在77.6%以上,其中L=0.8D的圆柱抑制效果最佳,几乎无振动;而L=1.2D和1.5D的圆柱反而出现振动增强,约4.5%和9%。对比单圆柱的共振区,附属柔性分离盘的圆柱共振区在约化速度上更靠后且范围更大。     

基于FPGA实现AES的侧信道碰撞攻击

为了解决攻击点在能量迹中具体位置的识别问题,在对侧信道碰撞攻击技术研究的基础上,提出了通过计算能量迹中每个采样点的方差来识别攻击点的方差检查技术。并利用基于相关系数的碰撞检测方法,对一种AES的FPGA实现实施了攻击。实验结果表明,方差检查技术可以有效地识别攻击点在能量迹中的具体位置。