变温条件下HDPE/CB的正电子湮灭特性

对掺杂了25份（phr）导电炭黑（CB）的样品进行了正电子湮灭寿命谱的变温测量，在玻璃化转变温度以上，随着温度的增加，自由体积的大小线性增加，在玻璃化转变温度以下，自由体积的大小基本不变，o-Ps的强度在－40℃下基本不变，从－40℃以上开始增加，但在50℃以上上升有加快的趋势，与PTC材料的PTC现象和导电性能有一定的关联。     

气敏材料的研究进展

从气敏材料种类，制备方法，改善气敏材料缺陷的手段等方面介绍了气敏材料的研究进展，论述了气敏材料研究中的新动向，展望了它的未来发展。     

透过符号看设计理念

符号设计作为当代设计理念的风格载体,承载着设计者的主观思想与文化观念的表达。文章以符号为本体,分析隐存其中的时代精神、民族文化以及设计个性,阐述设计观念对于当代符号设计的重要性。     

Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite／Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2-4H20 and PO(OH)x(OEt)3-x were selected as precursors, and hexafluorophosphoric acid (HPFo) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPFo to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.     

宽流道板式换热器在氧化铝生产种子分解过程中的应用

介绍了宽流道板式换热器的结构、特点及在氧化铝生产种子分解过程中的应用。     

填充等离子体波纹波导色散曲线计算软件的设计

从一种正弦波纹波导慢波结构的色散方程理论推导出发,设计了在不同结构参数、有无电子注以及填充不同等离子体浓度的情况下,计算其色散曲线的专用软件.该软件除了具有传统的数值计算功能外,提供了一个较为友好的图形用户界面.该界面直接显示该波纹波导的结构图,同时用户可以通过该界面很方便地修改各主要参数,比较不同情况下得到的色散曲线,以获得优化的参数选择.     

胆甾相液晶的光学特性

基于胆甾相液晶的特殊分子结构，综合阐述了胆甾相液晶的旋光性、选择性光散射和偏振光二色性等光学特性，揭示了它的光学特性主要源于它螺旋状的分子结构及其光学各相异性。     

Recent Progress of HT-7U Superconducting Tokamak

HT-7U is a superconducting tokamak. which is being constructed in Institute of Plasma Physics, Chinese Academy of Sciences. The mission of the HT-7U project is to develop a scientific and engineering basis of the steady state operation of advanced tokamak.The engineering design of the device has been optimized. The R&D program is going on. Short samples of the conductor and a CS model coil were tested. All the TF and PF coils will be manufactured and tested in Institute of Plasma Physics. Therefore, a 600-meter long jacketing line for cable-in-conduit conductors along with two winding machines, a set of VPI equipment and a test facility for the TF and PF coils are ready in ASIPP now. In this paper, the recent progress of the HT-7U is described.     

低位真空预压法在淤泥固结中的应用

东钱湖湖底疏浚吹填试验段工程利用低位真空预压法作用机理，通过现场试验和检测，验证该方法在淤泥固结中的应用效果良好，为今后东钱湖进行大面积清淤积累经验。     

微加速度计粘附问题的研究及应用

粘附是影响微机电系统(MEMS)可靠性的重要因素之一。针对MEMS的典型产品——微加速度计的粘附问题进行了研究,给出了2种典型的微加速度计的表征粘附特性的剥离数的表达式,并分析了将粘附条件应用于微加速度计的多学科设计优化之中,分析了其对系统结构设计产生的影响。