Electroless deposition of Ni on template of halloysite and its magnetic property

Halloysite template, a ceramic substrate, is of a hollow cylindric structure, on which the fine Pd nanoparticles are uniformly formed by the reduction of palldate chloride to initiate electroless deposition. The electroless deposition of Ni is catalyzed by the Pd particles, which results in a uniform layer of Ni-P alloy on halloysite. The alloy is of a nanocrystalline structure, of which the average diameter is about 6 nm. After being heat-treated at 400 ℃, it contains both Ni and Ni12P5 crystal, meanwhile, the Ni crystal gets larger with an average size of 51.9 nm.The content of phosphorous in the Ni layer has a great influence on crystal structure. The metallized halloysite has a higher inherent coercive force, and a much lower saturation magnetization in its as-plated state, while after heattreatment, the inherent coercive force decreases drastically. These magnetic properties have great relationship with the superparamagnetism of Ni nanocrystalline and the stress anisotropy in Ni layer.     

Phase transformation behavior in Al-Zn-Cu alloys by hammering

The 5Cu40Zn55Al and 15Cu20Zn65Al alloys were prepared in the AI-Zn-Cu system, There exist the metastable phases ε and θ in the two alloys after homogenization treatment and furnace cooling, respectively. It is shown that the particles are refined from 3 mm to less than 10 μm after hammering the two alloys but there are still metastable phases. This means that the phase constituents of the two alloys have no changes by the deformation, which is different from that by balling. The phase constituents are not changed at room temperature by hammering, which is dependent on the deformation mechanism of hammering.     

中缅伊江上游电源电站孤网运行探讨

近年中缅两国合作开发伊洛瓦底江上游水电,成为举世瞩目的能源合作工程。但由于当地电能匮乏,无法为大电站施工提供电能,须先期建设1座施工电源电站。由此,组成一个孤网供电系统,鉴于缅甸的环境特点,这种孤网运行缺点和困难也是少见的,笔者就这种电网运行作分析探讨。     

AD7794在高精度低功耗测量装置中的应用

采用AD7794,一种典型的仪用ADC,与超低功耗混合信号处理器MSP430F1611,构成了一个测量计量电路.实际使用表明,该电路具有低功耗、高精度和长期稳定性的特点;实测非线性度不大于10-3量级,能满足大多教工业测量计量的要求.     

基于经济的网格资源调度算法研究

网格使构建虚拟组织,在全世界范围内共享资源成为现实.但是,在网格环境下的资源管理和调度是一项相当复杂的工作,这主要是由于资源分布在世界各地,隶属于不同的组织,各个资源拥有者都有不同的使用和访问策略、开销模型、不断变化的负载和可用性.为了满足网格计算环境中资源调度的复杂需要,可以将现实世界中的经济原理和模型应用到网格环境下的任务调度中,并据此提出了几种经济资源调度算法.     

On the model-based networked control for singularly perturbed systems

In this paper, the control of a two-time-scale plant, where the sensor is connected to a linear controller/actuator via a network is addressed. The slow and fast systems of singularly perturbed systems are used to produce an estimate of the plant state behavior between transmission times, by which one can reduce the usage of the network. The approximate solutions of the whole systems are derived and it is shown that the whole systems via the network control are generally asymptotically stable as long as their slow and fast systems are both stable. These results are also extended to the case of network delay.     

两级数据融合算法在木材干燥过程中的应用

本文提出了一种基于RBF神经网络和证据理论的两级数据融合方法。利用RBF神经网络实现特征层数据融合,建立基本信任分配函数,具有最佳一致逼近特性,同时解决了D-S证据理论确定基本信任分配函数困难的问题。基于D-S证据理论的传感器故障诊断方法的研究,可有效地判断工业现场传感器的工作状态。实验结果表明该方法可正确定位并准确分离出木材含水率检测系统中失效传感器。     

Genie Shell for uC/OS-Ⅱ的设计与实现

为解决嵌入式实时操作系统uC/OS-Ⅱ缺少命令解释器,人机交互不便的问题提出了为uC/OS-Ⅱ设计Shell的思想.在介绍了硬件平台的基础上,给出了Shell的总体工作流程,详细描述了其串口函数及主任务的实现过程,并以绘图命令为例介绍了Shell中命令的实现及扩展方法.测试表明其运行稳定,较好的完成了uC/OS-Ⅱ的人机交互工作,并具有良好的可移植性和可扩展性.