On the behavior of microstructures with multiple length scales

The current study aims to provide fundamental insight into the behavior of microstructures containing grain sizes that span multiple length scales. A commercial 5083 Al alloy was selected as the material of interest to facilitate comparison with recently published data. The materials studied here were prepared via the thermal consolidation of powders that were cryomilled for different times (i.e., 0, 2, 4, and 8 hours). Following consolidation, the resultant microstructure was characterized by an equiaxed grain morphology with a size distribution centered around 200∼300 nm. Dispersed among the 200- to 300-nm grains were coarse-grained regions or ligaments with a grain size ranging from 600 nm to 2 μm. The occurrence of coarse-grained regions is rationalized on the basis of recrystallization or subgrain coarsening, whereas the occurrence of equiaxed fine regions is proposed to be a result of continuous grain growth. Two types of microstructures were selected for study, containing coarse-grained volumes of approximately 28 pct and 43 pct that corresponded to an ultimate tensile strength (UTS) of 566 MPa and 535 MPa, and a fracture strain of 3.2 pct and 3.5 pct, respectively. The observed ductility and the relevant toughening mechanisms were discussed in light of the presence of multiple length scales.     

基于项目的大学英语在线合作学习研究

本文根据教育部外语教学改革的总体要求和建构主义教学理论，总结了两年来作者将计算机技术和网络资源整合于大学英语教学，开展基于项目的大学英语在线合作学习研究的探索和实践。     

利用高酸值餐饮废油脂制备生物柴油

以高酸值餐饮废油脂为原料,在酯化反应后再经两步酯交换反应制备生物柴油。在酯化反应中添加吸水剂可降低油脂的酸值,经一次酯化反应即可将油脂的酸值降至2m g/g左右,满足酯交换反应的要求。考察了酯化反应中吸水剂的添加方式、种类及其用量对酯化反应的影响,以及酯交换催化剂的种类及用量对脂肪酸甲酯(FAME)收率和产物组成的影响。实验结果表明,以凹凸棒土为吸水剂(用量为餐饮废油脂中游离脂肪酸质量的3%),且在酯化反应30m in时加入,酯化效果较好;以质量比为1∶1的NaOH和KOH混合物为催化剂进行两步酯交换反应时,催化剂的最佳用量依次为1.00%和0.75%(质量分数,基于油脂的质量),FAME收率最高达到96.33%。     

Sediment chemistry and nutrient influx in a hydrologically restored bottomland hardwood forest in Midwestern USA

Exchanges of total N and C between a river and its floodplain forest have been enhanced by sedimentation processes during flood pulses at a 5‐ha bottomland hardwood forest located at the Olentangy River Wetland Research Park in central Ohio. In the spring of 2000, the forest was hydrologically restored by notching an artificial levee that had separated the Olentangy River and its floodplain forest for 100 years. One‐hundred flat sediment traps (30 cm × 30 cm) were used to collect sediment samples during spring/summer flooding events from 2003 to 2005. Results showed that sediment deposition is determined by the landscape variability during flooding events, Net sediment deposit in the wettest area averaged 134 ± 12 g‐dry wt m^?2 in 2003, 127 ± 17 g‐dry wt m^?2 in 2004 and 149 ± 23 g‐dry wt m^?2 in 2005. Total N and C sedimentation ranged from 0.49 to 0.92 g‐N m^?2 and 5.2 to 19.9 g‐C m^?2. Fe dominates the sediment chemistry and results show the elemental abundance in the order of Al > Fe > Ca > K > Mg > S > P > Na > Mn > Zn > B > Cu > Mo. A hydrologic pulsing index (HPI) could be used as an indicator for mass changes of energies with hydrologic pulsing events. Restoration of seasonally flooded bottomland forests could stimulate potentially large nutrient and Fe releases, which would eventually lead to an enhanced forest productivity and biodiversity. Copyright © 2007 John Wiley & Sons, Ltd.     

高效铣环在胜科1井事故处理中的应用

胜科1井是中国石化的一口重点科学探井,在钻至井深5001m时因井眼缩径发生了卡钻事故。由于井底存在直翼扩大器、PDC钻头等含有硬质合金的落鱼,普通铣鞋无法完成套铣打捞作业,为此,专门设计了一种高效铣环。该铣环的切削元件选用了一种硬度达93.2 HRA的钛合金,经铣槽镶焊在本体上;本体选用了40CrNiMo厚壁管材,并进行了调质处理;连接螺纹选用了双级梯形同步螺纹。在胜科1井的应用表明：切削元件的强度满足了切削扩大器切削翼和PDC钻头胎体的需要,其齿形、布齿方向和出刃高度设计合理,提高了切削速度;本体性能高,切削元件焊接性能较好;双级梯形同步螺纹有效增加了连接部位的强度,具有较高的上扣扭矩,承受冲击载荷能力强。高效铣环在该井的成功应用,为今后同类型井的事故处理提供了借鉴。     

山东省水资源配置思路浅析

山东省总体上属于资源性缺水省份，合理配置水资源已成为解决水资源供需矛盾、保障经济社会可持续发展的关键问题之一。通过对山东省水资源的基本特点进行分析，建立了水资源合理配置系统模型及生成配置方案，在供需平衡分析的基础上，提出了水资源合理配置的基本思路。     

病险土石坝培厚施工的测量控制

为保证土石坝稳定安全,病险水库除险加固设计中,通常对病险土石坝坝体内外坡进行培厚施工处理。文章详细介绍了病险土石坝培厚施工的测量控制中,平面控制网和高程控制网的确定以及填筑放样测量方法及控制。     

水分对高碱值硫化烷基酚钙结构和清净性的影响

采用傅立叶红外光谱仪，分析了水分对清净剂高碱值硫化烷基酚钙结构组成的影响；采用热管氧化试验法和曲轴箱模拟试验法，考察了高碱值硫化烷基酚钙在加水前后清净性能的变化；采用四球试验机和高频往复试验机，分析了水分对高碱值硫化烷基酚钙润滑性能的影响。结果表明，油中的水含量对高碱值硫化烷基酚钙的水解安定性能影响较大，并且随着水含量的增加，油品的清净性能和抗磨性能变差。     

高温型Mo-Al2O3金属陶瓷的研制

将Mo与Al2O3粉体按摩尔比为0．3、0．4、0．5配料，混合均匀后通过粉末冶金法制成3种Mo-Al2O3金属陶瓷试样。在1800℃，2h氢气气氛中烧结后，试样的气孔率随Mo含量的增加呈降低趋势，而强度呈增加趋势。同时，随Mo含量增加，金属陶瓷中Al2O3的晶粒尺寸减小，Mo的形态从以弥散状为主转变为以连续状为主。研制的高温型Mo-Al2O3金属陶瓷测温套管（金属与陶瓷摩尔比为0．4）在真空或N2保护条件下测量高温合金熔液温度时，平均使用寿命达到100次。     

加氢联合装置压缩机组的防喘振控制

阐述了喘振的发生、危害及其控制。介绍了加氢联合装置Triconex的TS-3000控制系统防喘振控制器的特性和各种控制线、防喘振控制的算法和操作。采用该系统后可以有效地实现防喘振控制，提高机组的控制灵敏度、稳定性及工艺生产过程的安全性和可靠性。