噻吩在镍基非晶态合金上的吸附和脱附

应用静态吸附、动态吸附、程序升温脱附和程序升温还原等实验方法，考察了噻吩在Ni基非晶态合金上的吸附和脱附行为。常温下，噻吩分子首先吸附在清洁的Ni表面，并立刻被活化，发生氢解反应，C-S键断裂，释放出烃类部分，S留在Ni原子上。噻吩可以在Ni基非晶态合金表面发生强度不同的化学吸附。弱化学吸附的噻吩可以脱附；强化学吸附的噻吩不会脱附，而在高温下发生氢解反应。     

环境保护地理信息系统的设计

本文主要介绍基于计算机网络的通用型环境保护地理信息系统的功能和实现方法。     

JOINING MECHANISMS OF β''''-Al2O3 CERAMIC AND PYREX GLASS TO Al MATRIX COMPOSITE

The bonding of β'-Al2O3 and pyrex glass to Al matrix composites by anodic bonding process is achieved. The microstructure of the bonded interface and the joining mechanisms are analyzed with scanning electron microscope (SEM), energy dispersive X-ray fluorescence spectrometer (EDX). It is observed that the bonding region across the interface consists of the metal layer, oxide transitional layer and the ceramic layer, with the transitional layer composed of surface region and sub-surface region. The bonding process can mainly be categorized into anodic bonding process and solid state diffusing process. The pile-up of the ions and its drift in the interface area are the main reasons for anode oxidation and joining of the interface. The temperature, voltage and the drift ions in the ceramic or glass during the bonding process are the essential conditions to solid state diffusing and oxide bonding at the interface. The voltages, temperature, pressure as well as the surface state are the main factors that influence the anodic bonding.     

兰州重离子加速器大型真空室

已建成的兰州重离子加速器的真空室是一个大型整体结构的超高真空容器,直径约10m,高4.5m,重65000kg,内表面积211m~2,容积100m~3,工作真空度为5×10~(-5)Pa。采用有限单元法在计算机上用SAP-5C程序对真空室受力分析进行了计算。真空室结构材料选用瑞典Uddeholm钢厂生产的316 L 超低碳不锈钢。承制此大型容器的是航天工业部风华机器厂。由于结构庞大,首先将真空室分成八大块和几小块在工厂制造,然后运至现场焊制成一整体容器并进行机械加工。所有密封焊缝均用着色渗透液,X-射线探伤和氦质谱探漏仪进行检查和探漏。     

电镀工艺条件变化对片状铁吸收剂吸波性能的影响

通过电镀法制备片状磁性吸收剂，用SEM、XRD等手段对其进行表征。用网络分析仪测试了不同工艺条件下吸收剂样品2～18GHz的电磁参数，并结合晶粒尺寸因素研究了不同工艺条件下对吸收剂电磁参数的影响．结果表明，不同的工艺条件对吸收剂电磁参数的影响具有规律性，可通过合理配置工艺参数来提高吸收剂的吸波性能。     

试论QC小组活动与企业文化建设相结合

本文分析了QC小组活动与企业文化的特点与共同点,提出开展QC小组活动与企业文化建设是互相促进,互相补充的,两者可以互相结合。     

Cr对低碳Si-Mn系TRIP钢组织与力学性能的影响

主要研究了Cr对低碳Si-Mn系TRIP钢组织与力学性能的影响。首先利用Formastor-F型膨胀仪测定了含Cr和不含Cr两种低碳钢的连续冷却转变(CCT)曲线,分析指出了Cr对连续退火工艺的潜在影响;然后采用Gleeble-3800热/力模拟试验机对两种钢的薄板试样进行了连续退火模拟实验,并通过拉伸试验测定了力学性能;最后采用金相、扫描电镜、X-射线衍射分析等技术考察分析了两种钢的显微组织。结果表明:含Cr的TRIP钢的组织比较细小,铁素体晶粒近似等轴分布;两种TRIP钢的残余奥氏体含量相近,但含Cr钢的残余奥氏体中的含碳量较高。分析认为这是由于含Cr钢在热轧阶段较易生成细小的组织,而在热处理阶段则抑制贝氏体的生成,最终获得稳定的残余奥氏体。     

Dielectric and piezoelectric properties of Pb(Ni1/3Nb2/3)O3–PbTiO3–PbZrO3 ceramics modified with bismuth and zinc substitutions

The dielectric and piezoelectric properties of the (Pb_0.985Bi_0.01)(Ni_1/4Zn_1/12Nb_2/3)_x- (Zr_σTi_1-σ)_1-xO₃ piezoelectric ceramic system (0.2 ≤ x ≤ 0.7, 0.1 ≤ σ ≤ 0.9) were systematically investigated. The results showed that, after poling, the dielectric constant, ε ₃₃ ^T , increased for the tetragonal compositions but decreased for the rhombohedral compositions. Furthermore, high values of ε ₃₃ ^T and piezoelectric modulus, d ₃₁ were found for the compositions along the extension of the morphotropic phase boundary. The highest values of the planar electromechanical coupling factor, K _p, and the piezoelectric modulus, d ₃₁, were found to be 0.70 and − 274 × 10^-12 C N^-1, respectively. The Curie temperature, remanent polarization, coercive field and the lattice constants of the a and c axes in relation to the Pb(Ni_1/3Nb_2/3)O₃ content and the Zr/Zr + Ti ratio were also determined. This revised version was published online in November 2006 with corrections to the Cover Date.     

异构数据的管理方法及异构数据源的集成研究

工程应用中软件工具的多样性和设计活动的分散性形成了大量异构数据。本文分析了传统的异构数据管理方法的不足，提出使用数据库系统的文件系统结合的管理方法。针对此方法下所形成的异构数据源问题，给出了基于J2EE规范的数据访问对象抽象工厂解决方案。     

聚苯乙烯溴代并接技聚二甲基硅氧烷

聚苯乙烯（PS）在苯溶液中与溴代丁二酰亚胺（NBS）反应，经分离提纯得到了固体溴代聚苯乙烯（PSB）。将所得PSB溶于苯并与低分子量的聚二甲基硅氧烷硅醇锂（PDMSOLi）反应，经分离提纯得到固体的溴代聚苯乙烯接枝聚二甲基硅氧烷（PSB－g-PDMSO),所得PSB-g-PDMSO的结构经^1H-NMR、IR及TEM表征。