Blends of poly(3‐hydroxybutyrate) with poly(β‐alanine) and its derivatives

Nanofibers and films of poly(3‐hydroxybutyrate) (PHB)/nylon 3 [poly(β‐alanine) (N3)], PHB/poly(α‐methyl‐β‐alanine) (2mN3), and PHB/poly(β‐methyl‐β‐alanine) (3mN3) blends were prepared by electrospinning and film‐casting techniques, respectively. The miscibility of the blends was studied by Fourier transform infrared spectrometry, differential scanning calorimetry, thermogravimetric analysis, and X‐ray diffraction (XRD). The electrospinnability of the blends was studied by scanning electron microscopy. Some characteristic IR absorption bands of the components in the blends shifted gradually with changes in the compositions. The melting temperature and decomposition temperature of PHB decreased gradually with increasing fractions of N3, 2mN3, and 3mN3. The XRD spectra of all of the blends exhibited peaks with lower intensities compared to those of the neat species. The suppression of PHB crystallinity in the blends after blending was attributed to the disruption of its crystal lattice and the prevention of recrystallization of each component by means of other components and segmental interactions between the components in the amorphous phase. Thermal, spectroscopic, and optical analyses of the polymer blends revealed that the polymers were miscible with good compatibility, and this could have improved the scaffold properties of PHB. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40484.     

Bioactive and Physicochemical Properties of Persimmon as Affected by Drying Methods

In this study, the effects of three different drying methods (freeze drying, oven drying, and vacuum oven drying) on bioactive (total phenolics, total flavonoids, condensed tannin and total hydrolyzable tannin contents, antiradical activity, and antidiabetic activity) and some physicochemical (dry matter, ash, water activity (a _w ), color, protein, hydroxymethylfurfural, glucose and fructose content) properties of persimmon fruit were investigated. Simplex lattice mixture design methodology was applied to determine the best solvent mixture for the extraction of phenolics from the samples. It was found that the mixture of acetone:water at the ratio of 50:50 % (v/v) was the best solvent mixture for the extraction. The persimmon powder sample obtained from freeze drying showed significantly (p <0.05) higher bioactivity values than oven- and vacuum-oven-dried samples. Antiradical activity changed significantly depending on the drying method employed and it was superior in freeze-dried samples than that of the other drying methods.     

Preparation of hybrid PU/PCL fibers from steviol glycosides via electrospinning as a potential wound dressing materials

In this study, the synthesis and application of biocompatible steviol glycosides based polyurethane/poly (ε-caprolactone) (PU/PCL) fibers was performed by electrospinning as a potential wound dressing materials that can be used for the closure of nonhealing wounds. During electrospinning, steviol glycoside-based polyurethane structures were used in blend formation with poly (ε-caprolactone) for easy producibility. Steviol glycosides are a natural abundant and easily accessible source as the main component of the wound dressing material due to their free hydroxyl groups, high biocompatibility, and hydrophilicity. The structure of steviol glycosides is composed of saccharide units and the free OH groups. Thus, steviol glycosides act as a crosslinker within the polyurethane structure and provides mechanical strength. For the production of steviol glycosides based PU/PCL fibers first, the steviol glycosides as a monomer were isolated from the stevia rebudiana. Then, polyurethane structures containing stevia glycoside were synthesized with hexamethylene diisocyanate, lactose and PEG-200 by solution polymerization technique. PCL was added to the prepared polyurethanes in a ratio of 1:2 and formation of nanofiber structure. The prepared wound dressing material was characterized by Fourier transform infrared, atomic force microscopy, and scanning electron microscope techniques. Swelling degree, water content and oxygen permeability assay of the steviol glycosides based PU/PCL wound dressing material was determined. In biocompatibility test, cell viability value of PU/PCL fibrous materials in indirect cytotoxicity test was determined as 86.9% and cell adhesion on hybrid PU/PCL fibers was showed as morphological. In accordance with this target, the steviol glycosides based PU/PCL wound dressing material can be produced easily and low cost. As a result, the wound dressing materials obtained with their high biocompatibility and low costs will be an effective and fast method for the healing of open wounds of diabetics.     

Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l‐lactide‐co‐ε‐caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation

Three‐dimensional fluorinated pentablock poly(l ‐lactide‐co‐ε‐caprolactone)‐based scaffolds were successfully produced by the incorporation of thermally exfoliated graphene oxide (TEGO) as an antimicrobial agent with an electrospinning technique. In a ring‐opening polymerization, the fluorinated groups in the middle of polymer backbone were attached with a perfluorinated reactive stabilizer having oxygen‐carrying ability. The fiber diameter and its morphologies were optimized through changes in TEGO amount, voltage, polymer concentration, and solvent type to obtain an ideal scaffold structure. Instead of the widely used graphene oxide synthesized by Hummer's method, TEGO sheets having a low amount of oxygen produced by thermal expansion were integrated into the fiber structure to investigate the effect of the oxygen functional groups of TEGO sheets on the degradation and antimicrobial activity of the scaffolds. There was no antimicrobial activity in TEGO‐reinforced scaffolds in the in vitro tests in contrast to the literature. This study confirmed that a low number of oxygen functional groups on the surface of TEGO restricted the antimicrobial activity of the fabricated composite scaffolds. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43490.     

Investigation of the performance of carbide cutting tools with hard coatings in hard milling based on the response surface methodology

Machining of hard materials has become a great challenge for several decades. One of the problems in this machining process is early tool wear, and this affects the machinability of hard materials. In order to increase machinability, cutting tools are widely coated with nanostructured physical vapor deposition hard coatings. The main characteristics of such advanced hard coatings are high microhardness and toughness as well as good adhesion to the substrate. In this paper, the influence of hard coatings (nanolayer AlTiN/TiN, multilayer nanocomposite TiAlSiN/TiSiN/TiAlN, and commercially available TiN/TiAlN) and cutting parameters (cutting speed, feed rate, and depth of cut) on cutting forces and surface roughness were investigated during face milling of AISI O2 cold work tool steel (～61 HRC). The experiments were conducted based on 3¹³ factorial design by response surface methodology, and response surface equations of cutting forces and surface roughness were obtained. In addition, the cutting forces obtained with the coated and uncoated tools were compared. The results showed that the interaction of coating type and depth of cut affects surface roughness. The hard coating type has no significant effect on cutting forces, while the cutting force F _z is approximately two times higher in the case of uncoated tool.     

Surface Films and Soluble Degradation Products Formed in a PFPAE Fluid and Their Implications to the Wear of Steel

The soluble degradation products were generated in a linear perfluoropolyalkylether (PFPAE) fluid in boundary lubrication. Perfluoropolyalkylether carboxylic acid species were found in the residual fluids from the sliding tests by vibration spectroscopy. Surface-bound organic and inorganic reaction products were identified by vibration microspectroscopy with a grazing angle objective attachment and X-ray photoelectron spectroscopy (XPS), respectively. Inorganic surface films were found to be composed primarily of FeF₃. A monodentate perfluorocarboxylate surface species was found on the sliding surfaces in 50° and 100°C tests but not found in 150°C tests. The higher friction and wear in 150°C tests as compared to 50° and 100°C tests were attributed to the absence of the perfluorocarboxylate species over the sliding surfaces at high temperatures.     

Geostatistical Analysis of Spatial Distribution of Salt Bed Thickness

The data on salt bed thickness distribution are processed using the semi-variogram analysis. Two- and three-dimensional maps of bed thickness distribution, as well as the error maps are presented.     

Preparation of comb‐type grafted hydrogels composed of polyacrylamide and chitosan and their use for DNA adsorption

Comb‐type grafted hydrogels composed of polyacrylamide (PAAm) and chitosan (CT) were prepared and used for DNA adsorption. Instead of direct grafting of the acrylamide monomer onto the CT chain, semitelechelic PAAm with carboxylic acid end groups (PAAm–COOH) was synthesized by free‐radical polymerization with mercaptoacetic acid as the chain‐transfer agent, and it was grafted onto CT with amino groups. The synthesis of telechelic PAAm–COOH and the formation of comb‐type grafted hydrogels were confirmed by attenuated total reflectance/Fourier transform infrared spectroscopy and scanning electron microscopy measurements. The prepared comb‐type grafted hydrogels were used as sorbents in DNA adsorption experiments conducted at +4°C in a tris(hydroxymethyl)aminomethane/ethylenediaminetetraacetic acid solution of pH 7.4. DNA adsorption capacities as high as 2.0 × 10³ μg of DNA/g of dry gel could be achieved by the comb‐type hydrogels with higher PAAm contents. This value was approximately 6 times higher than that of CT alone. In addition, the comb‐type hydrogels showed a high adsorption/desorption rate depending on the PAAm content in the hydrogel. As a result, these comb‐type hydrogels carrying higher amounts of DNA may be considered good candidates for achieving higher removal rates for anti‐DNA antibodies and for effective gene therapy systems. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Competitive adsorption of uranyl ions in the presence of Pb(II) and Cd(II) ions by poly(glycidyl methacrylate) microbeads carrying amidoxime groups and polarographic determination

The adsorption capacity of UO in the presence of Pb(II) and Cd(II) ions was investigated with amidoximated poly(glycidyl methacrylate) (PGMA) microbeads with an average size of 135 μm packed in a glass column (0.5‐cm i.d. and 20‐cm length, flow rate = 3 mL/min) under competitive conditions. A differential pulse polarography technique was used for the determination of trace quantities of uptaken elements by the measurement of the reduction peak currents at ?200/?950, ?400, and ?600 mV (vs a saturated calomel electrode) for UO, Pb(II), and Cd(II) ions, respectively. When only UO was found in the eluate, its adsorption was 85.3% from a 50 μM initial solution. However, when there was UO with binary systems of Pb(II) or Cd(II), it was 78.2 and 76.3%, respectively. On the other hand, in a ternary mixture of UO with Pb(II) and Cd(II), the adsorption was found to be 75.2% with the same initial concentration. According to the results, the competitive adsorption studies showed that these amidoximated PGMA microbeads had good adsorption selectivity for UO with the coexistence of Pb(II) and Cd(II) ions. The ionic strength of the solution also influenced the UO adsorption capacity of the amidoximated PGMA microbeads. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4168–4172, 2007     

Gas absorption into a wavy two‐layer falling film

Absorption of a weakly soluble gas into a two‐layer film flowing down a vertical wall is studied in the framework of an approximate long‐wave model. It is shown that wavy regimes in the film strongly affect the absorption rate. © 2015 American Institute of Chemical Engineers AIChE J, 61: 2058–2069, 2015