The effects of pH and suspended solids in the removal of organics from waters and wastewaters by the activated carbon adsorption process

The effects of pH, inorganic suspended solids and organic suspended solids on the adsorption of organics by activated carbon were investigated using sewage effluents and selected organic compounds of varying size, structure, molecular weight and properties in model solutions. It was found that suspended solids, and in particular organic suspended solids, could interfere with the adsorption process, both in terms of adsorption capacity and adsorption rate; the effect of the solids diminished as the size of the adsorbate increased. The effect of pH variation became more significant as the acidity or basicity of the adsorbate in solution increased. Adsorption of organics from biologically treated sewage effluents was somewhat more effective in the acid and alkaline pH regions than in the neutral pH region.     

Renewable energy and wild life conservation: Design and construction of a solar incubator

This paper presents the design, construction and results of a solar powered incubator and pools for rearing yacaré, a specie of the crocodile family, found in northern Argentina. The design was developed by the Research Centre Habitat & Energy, Faculty of Architecture, Design and Urbanism, Buenos Aires University in the framework of a Cooperation Agreement with the Argentine Wild Life Foundation. The installation, located in a Wild Life Refuge in a remote sub-tropical area of the Chaco Province in the north-east region of Argentina, consists of an incubation chamber for hatching the yacaré with strict temperature conditions, pools for rearing the young during a year, heated by solar energy, an auxiliary wood-fired water heater and PV system to power the pumps control system and other minimal requirements such as lighting. The concepts, system development and integration, construction process and measured performance are presented together with the first results of this project which integrates low impact renewable energy systems to support the conservation of an endangered specie.     

The Great Lakes Cladophora Model: Development,testing, and application to Lake Michigan

A recent review of the Great Lakes Water Quality Agreement has concluded that while controls on phosphorus inputs to Lake Michigan achieved the desired effect in offshore waters, the nearshore region continues to suffer from elevated phosphorus levels. Failure to achieve trophic state goals in the nearshore is manifested in nuisance growth of Cladophora and attendant impacts on property owners, utilities, and the public health and welfare. This study focuses on a site in Lake Michigan near Milwaukee, Wisconsin, where nuisance growth of Cladophora and associated beach fouling occur regularly. A mechanistic model simulating Cladophora growth, suitable for guiding nutrient management in the Great Lakes nearshore, is presented. The model represents an update of the Canale and Auer framework, reflecting current understandings of Cladophora ecology and offering a user-friendly interface making the software more widely available to decision makers. This Great Lakes Cladophora Model (GLCM) is first validated for the Auer/Canale data set collected in 1979 at a site on Lake Huron and then for a data set developed in 2006 for a site on Lake Michigan. Model performance under the strikingly different forcing conditions (depth, light, phosphorus levels) characteristic of these two sites affirms the widespread applicability of the tool. The GLCM is then extended to examine the impacts of ecosystem perturbation (dreissenid colonization) on Cladophora growth and to future approaches to monitoring and management.     

Influence of convection and grain movement on globular equiaxed solidification

A two-phase volume averaging model was used to study convection and grain movement, and their influence on the globular equiaxed solidification. Both liquid and solid phases were treated as separate interpenetrating continua. The mass, momentum, species and enthalpy conservation equations for each phase and a grain transport equation were coupled. An ingot casting (Al-4 wt.% Cu) with near globular solidification morphology was simulated. Case studies with different modeling assumptions such as with and without grain movement, and with slip and non-slip boundary conditions for solid phase were presented and compared. Understanding of grain evolution and macrosegregation formation in globular equiaxed solidification was improved.     

High heat flux removal using water subcooled flow boiling in a single-side heated circular channel

High heat flux removal from plasma-facing components and electronic heat sinks involves conjugate heat transfer analysis of the applicable substrate and flowing fluid. For the present case of subcooled flow boiling inside a single-side heated circular channel, the dimensional results show the significant radial, circumferential and axial variations in all thermal quantities for the present radial aspect ratio (R_o=outside radius to inside radius) of 3.0. A unified, dimensionless representation of the two-dimensional inside wall heat flux, and the dimensional inside wall heat flux (q_i(φ,z)) and temperature (T_i(φ,z)) data was found and used to collapse the data for all circumferential locations. Finally, 2-D boiling curves are presented and are among the first full set of 2-D boiling data presented for a single-side heated circular configuration.     

A new LC series element for compact bandpass filter design

A new LC series element based on a modified version of the split rings resonator introduced in is proposed. Owing to its small electrical size, the new open split ring resonator (OSRR) is a very attractive element for compact bandpass filter design. As an example, we have designed and fabricated a filter to produce a bandpass around the resonance frequency of the employed OSRRs. The filter bandwidth is controlled by the length of the transmission lines connecting the OSRRs. Sharp and deep out-of-band rejection is achieved by cascading several OSRRs. Circuit theory and electromagnetic based simulations reasonably agree with experiments.     

High‐Performance Supercapacitors Based on a Zwitterionic Network of Covalently Functionalized Graphene with Iron Tetraaminophthalocyanine

Graphene derivatives are promising candidates as electrode materials in supercapacitor cells, therefore, functionalization strategies are pursued to improve their performance. A scalable approach is reported for preparing a covalently and homogenously functionalized graphene with iron tetraaminophthalocyanine (FePc‐NH₂) with a high degree of functionalization. This is achieved by exploiting fluorographene's reactivity with the diethyl bromomalonate, producing graphene‐dicarboxylic acid after hydrolysis, which is conjugated with FePc‐NH₂. The material exhibits an ultrahigh gravimetric specific capacitance of 960 F g^?1 at 1 A g^?1 and zero losses upon charging–discharging cycling. The energy density of 59 Wh kg^?1 is eminent among supercapacitors operating in aqueous electrolytes with graphene‐based electrode materials. This is attributed to the structural and functional synergy of the covalently bound components, giving rise to a zwitterionic surface with extensive π–π stacking, but not graphene restacking, all being very beneficial for charge and ionic transport. The safety of the proposed system, owing to the benign Na₂SO₄ aqueous electrolyte, the high capacitance, energy density, and potential of preparing the electrode material on a large‐scale and at low cost make the reported strategy very attractive for development of supercapacitors based on the covalent attachment of suitable molecules onto graphene toward high‐synergy hybrids.