常见金属眼镜架中有害元素的含量分析

本文针对市面上常见金属眼镜架的主要成分,利用X射线荧光光谱进行无损检测,测定并分析其中主要成分,并对其进行分类总结。     

新疆某铁矿粗精矿制取超级铁精矿的试验研究

针对新疆某铁矿石嵌布粒度细的特点,在生产普通铁精矿的基础上,进行了制取超级铁精矿的试验研究。当再磨细度-320目94%的极细条件下,采用磁选、反浮选工艺,可使二氧化硅含量降低到0.324%,超级铁精矿品位达到71.92%,回收率接近70%。试验取得理想的技术指标,使该铁矿资源得到合理、更有效的利用。     

Toward Energy-Efficient and Trustworthy eHealth Monitoring System

The rapid technological convergence between Internet of Things(IoT),Wireless Body Area Networks(WBANs)and cloud computing has made e-healthcare emerge as a promising application domain,which has significant potential to improve the quality of medical care.In particular,patient-centric health monitoring plays a vital role in e-healthcare service,involving a set of important operations ranging from medical data collection and aggregation,data transmission and segregation,to data analytics.This survey paper firstly presents an architectural framework to describe the entire monitoring life cycle and highlight the essential service components.More detailed discussions are then devoted to {\em data collection} at patient side,which we argue that it serves as fundamental basis in achieving robust,efficient,and secure health monitoring.Subsequently,a profound discussion of the security threats targeting eHealth monitoring systems is presented,and the major limitations of the existing solutions are analyzed and extensively discussed.Finally,a set of design challenges is identified in order to achieve high quality and secure patient-centric monitoring schemes,along with some potential solutions.     

NH_3-OH体系中共沉淀法同时回收钕铁硼废料中Nd-Pr-Co-Fe

为了避免回收单一钕铁硼废料中有价元素带来的操作复杂和资源浪费等问题,本研究采用共沉淀法共沉淀出钕铁硼废料中的有价元素Me(Nd,Pr,Co,Fe),制备可用于生产再生钕铁硼的原料;根据质量守恒和同时平衡原理,采用MATLAB软件建立Me(Nd,Pr,Co,Fe)-OH--NH3热力学模型,绘制lg[Me]-p H曲线模拟共沉淀工艺,并根据模拟结果确立了共沉淀工艺;模拟和实验的结果表明:根据lg[Me]-p H模拟结果可以确立一步共沉淀法的p H:6~10,Fe3+比Fe2+更易于沉淀完全;在上述条件下获得的共沉淀粉末主相均为Nd,Pr,Co,Fe的化合物,且有价元素的百分比含量均大于99.4%;其中,当p H值在8左右时回收率最高,在该条件下金属元素Me(Nd,Pr,Co,Fe)的沉淀效率分别为:98.7%,99.9%,93.6%,99.9%。该结果也表明共沉淀法工艺不仅高效,而且所制备的共沉淀粉末可以满足制备二次钕铁硼的需要。     

可见光引发剂研究进展

光固化技术的应用非常广泛，常用于光固化涂料、油墨、牙科固化、胶粘剂以及 3D打印材料等领域。与紫外光固化相比，可见光固化具备辐射安全、固化深度高、设备价格低廉等优势。作为光固化体系的重要组成部分，光引发剂的研究一直备受关注。本文对近 2~3 a可见光引发剂的研究进展进行了综述，主要从 TPO类、萘酰亚胺类、蒽醌类、咔唑类、硅酮类、肟酯类、共轭染料类、光生酸剂类和金属配合物类光引发剂 9个方面进行了综述，并对可见光引发剂的发展方向做了简单的概述。     

氨汽提尿素装置高压系统降压操作控制

通过对氨汽提尿素装置高压系统合成操作压力的理论分析,结合实际工况降低高压系统操作压力,使装置的设备运转状况得到有效改善。     

大型复杂工程管理的方法论

本文首先对大型工程系统中的复杂性展开详细分析,然后结合复杂性管理中的各种概念和理论,进一步探讨大型复杂工程管理上的综合集成管理方法论,以供参考。     

Room Temperature Ferromagnetism in Co-doped CuAlO2 Nanofibers Fabricated by Electrospinning

One-dimensional, diluted magnetic semiconductor nanofibers have attracted increasing attention for their unique magnetic properties, large specific surface area, and high porosity. These qualities lead to excellent performance in magneto-optical devices, magnetic resonance imaging, ferrofluids and magnetic separation. The purpose of this study is to fabricate P-type one dimensional CuAlO2-based diluted magnetic semiconductor nanofibers. First, we fabricated Cu Al0.95Co0.05O2 nanofibers with an average diameter of 1 μm with the electrospinning method. The annealed nanofibers were thermally treated at a temperature of 1 100 ℃ and then shrunk to a diameter of about 650 nm. We used X-ray diffraction measurements and Raman spectra to confirm that the Cu Al0.95Co0.05O2 nanofibers had a single impurity free delafossite phase. The X-ray photoelectron spectroscopy analysis indicates that Co was present in the +2 oxidation state, resulting in an room temperature ferromagnetism in the Cu Al0.95Co0.05O2 fiber. This contrasts with nonmagnetism in pristine CuAlO2 fiber. The coercivity(Hc) value of 65.26 Oe and approximate saturation magnetization(Ms) of 0.012 emu/g demonstrate good evidence of ferromagnetism at room temperature for Cu Al0.95Co0.05O2 nanofibers.