Induction of apoptosis and apoptotic mediators in balb/C splenic lymphocytes by dietary n−3 and n−6 fatty acids

The present study was designed to investigate the effect of diatery n−6 and n−3 polyunsaturated fatty acids (PUFA) on anti-CD3 and anti-Fas antibody-induced apoptosis and its mediators in mouse spleen cells. Nutritionally adequate semipurified diets containing either 5% w/w corn oil (n−6 PUFA) or fish oil (n−3 PUFA) were fed to weanling female Balb/C mice, and 24 wk later mice were sacrificed. In n−3 PUFA-fed mice, serum and splenocyte lipid peroxides were increased by 20 and 28.3% respectively, compared to n−6 PUFA-fed mice. Further, serum vitamin F levels were decreased by 50% in the n−3 PUFA-fed group, whereas higher anti0Fas- and anti-CD3-induced apoptosis (65 and 66%) and necrosis (17 and 25%), compared to the n−6 PUFA-fed group, were found when measured with Annexin V and propidium iodide staining, respectively. In addition, decreased Bcl-2 and increased Fas-ligand (Fas-L) also were observed in the n−3 PUFA-fed group compared to the n−6 PUFA-fed group. No difference in the ratio of splenocyte subsets nor their Fas expression was observed between the n−3 PUFA-fed and n−6 PUFA-fed groups, whereas decreased proliferation of splenocytes was found in n−3 PUFA-fed mice compared to n−6 PUFA-fed mice. In conclusion, our results indicate that dietary n−3 PUFA induces higher apoptosis by increasing the generation of lipid peroxides and elevating Fas-L expression along with decreasing Bcl-2 expression. A reduced proliferative response of immune cells also was observed in n−3 PUFA-fed mice.     

Surface-modified superparamagnetic nanoparticles for drug delivery: preparation, characterization, and cytotoxicity studies

Superparamagnetic iron oxide nanoparticles have been used for many years as magnetic resonance imaging (MRI) contrast agents or in drug delivery applications. In this study, a novel approach to prepare magnetic polymeric nanoparticles with magnetic core and polymeric shell using inverse microemulsion polymerization process is reported. Poly(ethyleneglycol) (PEG)-modified superparamagnetic iron oxide nanoparticles with specific shape and size have been prepared inside the aqueous cores of AOT/n-Hexane reverse micelles and characterized by various physicochemical means such as transmission electron microscopy (TEM), infrared spectroscopy, atomic force microscopy (AFM), vibrating sample magnetometry (VSM), and ultraviolet/visible spectroscopy. The inverse microemulsion polymerization of a polymerizable derivative of PEG and a cross-linking agent resulted in a stable hydrophilic polymeric shell of the nanoparticles. The results taken together from TEM and AFM studies showed that the particles are spherical in shape with core-shell structure. The average size of the PEG-modified nanoparticles was found to be around 40-50 nm with narrow size distribution. The magnetic measurement studies revealed the superparamagnetic behavior of the nanoparticles with saturation magnetization values between 45-50 electromagnetic units per gram. The cytotoxicity profile of the nanoparticles on human dermal fibroblasts as measured by standard 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay showed that the particles are nontoxic and may be useful for various in vivo and in vitro biomedical applications.     

Deformation-induced release of ATP from erythrocytes in a poly(dimethylsiloxane)-based microchip with channels that mimic resistance vessels

The ability of nitric oxide to relax smooth muscle cells surrounding resistance vessels in vivo is well documented. Here, we describe a series of studies designed to quantify amounts of adenosine triphosphate (ATP), a known stimulus of NO production in endothelial cells, released from erythrocytes that are mechanically deformed as these cells traverse microbore channels in lithographically patterned microchips. Results indicate that micromolar amounts of ATP are released from erythrocytes flowing through channels having cross sectional dimensions of 60 x 38 micron (2.22 +/- 0.50 microM ATP). Microscopic images indicate that erythrocytes, when being pumped through the microchip channels, migrate toward the center of the channels, leaving a cell-free or skimming layer at the walls of the channel, a profile known to exist in circulatory vessels in vivo. A comparison of the amounts of ATP released from RBCs mechanically deformed in microbore tubing (2.54 +/- 0.15 microM) vs a microchip (2.59 +/- 0.32 microM) suggests that channels in microchips may serve as functional biomimics of the microvasculature. Control studies involving diamide, a membrane-stiffening agent, suggest that the RBC-derived ATP is not due to cell lysis but rather physical deformation.     

Performance optimization of spectroscopic process analyzers

To increase the power and the robustness of spectroscopic process analyzers, methods are needed that suppress the spectral variation that is not related to the property of interest in the process stream. An approach for the selection of a suitable method is presented. The approach uses the net analyte signal (NAS) to analyze the situation and to select methods to suppress the nonrelevant spectral variation. The empirically determined signal-to-noise of the NAS is used as a figure of merit. The advantages of the approach are (i). that the error of the reference method does not affect method selection and (ii). that only a few spectral measurements are needed. A diagnostic plot is proposed that guides the user in the evaluation of the particular suppression method. As an example, NIR spectroscopic monitoring of a mol-sieve separation process is used.     

New indicator for optimal preprocessing and wavelength selection of near-infrared spectra

Preprocessing of near-infrared spectra to remove unwanted, i.e., non-related spectral variation and selection of informative wavelengths is considered to be a crucial step prior to the construction of a quantitative calibration model. The standard methodology when comparing various preprocessing techniques and selecting different wavelengths is to compare prediction statistics computed with an independent set of data not used to make the actual calibration model. When the errors of reference value are large, no such values are available at all, or only a limited number of samples are available, other methods exist to evaluate the preprocessing method and wavelength selection. In this work we present a new indicator (SE) that only requires blank sample spectra, i.e., spectra of samples that are mixtures of the interfering constituents (everything except the analyte), a pure analyte spectrum, or alternatively, a sample spectrum where the analyte is present. The indicator is based on computing the net analyte signal of the analyte and the total error, i.e., instrumental noise and bias. By comparing the indicator values when different preprocessing techniques and wavelength selections are applied to the spectra, the optimal preprocessing technique and the optimal wavelength selection can be determined without knowledge of reference values, i.e., it minimizes the non-related spectral variation. The SE indicator is compared to two other indicators that also use net analyte signal computations. To demonstrate the feasibility of the SE indicator, two near-infrared spectral data sets from the pharmaceutical industry were used, i.e., diffuse reflectance spectra of powder samples and transmission spectra of tablets. Especially in pharmaceutical spectroscopic applications, it is expected beforehand that the non-related spectral variation is rather large and it is important to remove it. The indicator gave excellent results with respect to wavelength selection and optimal preprocessing. The SE indicator performs better than the two other indicators, and it is also applicable to other situations where the Beer-Lambert law is valid.     

Synthesis and characterization of Cu nanotubes and nanothreads by electrical arc evaporation

We report the formation and characterization of copper nanostructures, nanotubules and nanothreads, which were obtained by electrical arc evaporation of Cu electrodes under varied conditions of He ambience. Electrical arc evaporation was done with approximately 10 V and (approximately 50-100 A) DC current. The current was used in a pulse mode. The evaporated material was condensed on a formvar-coated Cu grid mounted on a liquid N2-cooled specimen holder. Transmission electron microscopy was employed to characterize the condensed materials. These investigations revealed that the condensed materials consisted of the mentioned nanostructures. Nanotubes and nanothreads are formed for a He pressure in the chamber corresponding to approximately 140 and approximately 500 torr, respectively. Extensive electron microscopic investigations showed that the diameter of the nanotubes varied from approximately 5 nm to approximately 50 nm and their length from 2 microns to 3 microns.     

Dielectrophoresis in microchips containing arrays of insulating posts: theoretical and experimental results

Dielectrophoresis (DEP), a nonlinear electrokinetic transport mechanism, can be used to concentrate and sort cells, viruses, and particles. To date, microfabricated DEP-based devices have typically used embedded metal electrodes to apply spatially nonuniform, time-varying (AC) electric fields. We have developed an alternative method in which arrays of insulating posts in a channel of a microchip produce the spatially nonuniform fields needed for DEP. Electrodes may be located remotely, allowing operation of the device down to zero frequency (DC) without excessive problems of electrolysis. Applying a sufficiently large electric field across an insulating-post array produces two flow regimes through a competition between electrokinetic flow (combined electrophoresis and electroosmosis) and dielectrophoresis. "Streaming DEP" is observed when DEP dominates diffusion but is overcome by electrokinetic flow. Particles concentrated by DEP forces in areas of electric field extrema travel electrokinetically down the array in flowing streams. In an array of posts, dielectrophoretic forcing within repeated rows adds coherently to produce flowing streams of highly concentrated and rarefied particles. We demonstrate that this reinforcement is a strong function of alignment of the array with respect to the applied electric field and that the particle concentrations can be "enhanced" or "depleted" along columns of posts, enabling a novel class of continuous-flow, selective particle filter/concentrator devices. To our knowledge, this is the first observation of streaming dielectrophoresis. The second regime is "trapping DEP," in which DEP forces dominate over both diffusion and electrokinetic flow, reversibly immobilizing particles on the insulating posts, enabling inexpensive and embedded batch filter/concentrator devices. Devices can be biased electrically to manipulate particles selectively by varying the field strength to vary the relative magnitudes of electrokinetic flow and DEP. Post shapes are contoured easily to control electric field gradients and, hence, DEP behavior. Simple simulations based on similitude of fluid flow and electric field that solve the Laplace equation to obtain fluid velocity have also been developed to predict the dielectrophoretic behavior in an array of posts. These simulations are in excellent agreement with the experimental observations and provide insight into electrokinetic behavior to enable design of dielectrophoretic concentrators and sorters.     

Biodegradation studies of rosin-based polymers

This study was designed to investigate two rosin-based polymers (R-1 and R-2) for their in vitro and in vivo biodegradation behavior. The in vitro hydrolytic degradation was carried out in buffer solutions of pH 4.4, 7.4, and 10.4 at 37 degrees C. Enzymatic degradation was studied using enzymes lipase, pancreatine, and pectinase. Free films of the two polymers were subcutaneously implanted in rabbits for the in vivo biodegradation. The extent of degradation was determined quantitatively by weight loss and was followed qualitatively by scanning electron microscopy. The extent and the rate of degradation was better in vivo than in vitro. The polymers showed poor enzymatic degradation and a highly pH-dependent hydrolytic degradation.     

Synthesis and characterisation of 4-picrylamino-2,6-dinitrotoluene (PADNT): a new insensitive explosive

A chemoselective reductive method has been achieved for the preparation of 4-picrylamino-2,6-dinitrotoluene (PADNT), a new insensitive energetic material which has been characterised by spectral data and elemental analysis. Some explosive properties of the compound have also been determined and the results indicate that PANDT is quite safe to impact and friction.